Mitsubishi Electric Mr.Slim PLA-RP100AA2 Manuel utilisateur

SERVICE MANUAL

SPLIT-TYPE, HEAT PUMP AIR CONDITIONERS

SPLIT-TYPE, AIR CONDITIONERS

No. OC357

REVISED EDITION-A

CONTENTS

1. REFERENCE MANUAL ······································2

2. SAFETY PRECAUTION···································2

3. PART NAMES AND FUNCTIONS ···················6

4. SPECIFICATIONS············································9

5. NOISE CRITERION CURVES························10

6. OUTLINES AND DIMENSIONS ·····················11

WIRING DIAGRAM

············································12

REFRIGERANT SYSTEM DIAGRAM

··················13

9. TROUBLESHOOTING ···································14

10. DISASSEMBLY PROCEDURE ······················31

11. PARTS LIST ···················································34

12. RoHS PARTS LIST ········································37

Indoor unit

[Model names] [Service Ref.]

PLA-RP100AA2 PLA-RP100AA2.UK

PLA-RP125AA2 PLA-RP125AA2.UK

PLA-RP140AA2 PLA-RP140AA2.UK

July 2006

INDOOR UNIT

WIRED REMOTE

CONTROLLER

WIRELESS REMOTE

CONTROLLER

ON/OFF TEMP

ON/OFF

TEMP.

Model name

indication

Note:

•This manual describes only

service data of the indoor

units.

•RoHS compliant products

have <G> mark on the spec

name plate.

•For servicing of RoHS com-

pliant products, refer to the

RoHS Parts List.

Revision:

•

RoHS PARTS LIST

is added.

•Some descriptions have

been modified.

•Please void OC357.

OC357A--1.qxp 06.7.18 9:04 AM Page 1

1REFERENCE MANUAL

SAFETY PRECAUTION

Cautions for units utilising refrigerant R407C

CAUTIONS RELATED TO NEW REFRIGERANT

Do not use the existing refrigerant piping.

The old refrigerant and lubricant in the existing piping

contains a large amount of chlorine which may cause the

lubricant deterioration of the new unit.

Use “low residual oil piping”

If there is a large amount of residual oil (hydraulic oil, etc.)

inside the piping and joints, deterioration of the lubricant

will result.

Use ESTER , ETHER or HAB as the lubricant to

coat flares and flange connection parts.

If large amount of mineral oil enter, that can cause

deterioration of refrigerant oil etc.

Use liquid refrigerant to charge the system.

If gas refrigerant is used to seal the system, the composition

of the refrigerant in the cylinder will change and performance

may drop.

Do not use a refrigerant other than R407C.

If another refrigerant (R22, etc.) is used, the chlorine in the

refrigerant may cause the lubricant deterioration.

Use a vacuum pump with a reverse flow check valve.

The vacuum pump oil may flow back into the refrigerant

cycle and cause the lubricant deterioration.

Store the piping to be used during installation

indoors with keep both ends sealed until just

before brazing.

(Store elbows and other joints in a plastic bag.)

If dust, dirt, or water enters the refrigerant cycle,

deterioration of the oil and compressor trouble may result. Ventilate the room if refrigerant leaks during

operation. If refrigerant comes into contact with

a flame, poisonous gases will be released.

Service Ref.

PUHZ-RP100/125/140VHA(1)

PUHZ-RP100/125/140YHA(1)

PUHZ-RP200/250YHA(1)

PU(H)-P·VGAA.UK

PU(H)-P·YGAA.UK

SUZ-KA·VA.TH

Service Manual No.

OC334

OC338

OC336

PUHZ-RP100/125/140VHA2

PUHZ-RP100/125/140YHA2 OC374

PU(H)-P100VHA.UK

PU(H)-P100/125/140YHA.UK OC379

PUHZ-P100/125/140VHA.UK OC359

OC322

1-1. OUTDOOR UNIT’S SERVICE MANUAL

Series (Outdoor unit)

PUHZ-RP·VHA(-A)

PUHZ-RP·YHA(-A)

PU(H)-P·VGAA.UK

PU(H)-P·YGAA.UK

Manual No.

OCS01

OCS02

PUHZ-RP·VHA2

PUHZ-RP·YHA2 OCS05

PUHZ-P·VHA OCS06

PU(H)-P·VHA

PU(H)-P·YHA OCS07

1-2. TECHNICAL DATA BOOK

OC357A--1.qxp 06.7.18 9:04 AM Page 2

[2] Refrigerant recharging

(1) Refrigerant recharging process

1Direct charging from the cylinder.

·R407C cylinder are available on the market has a syphon pipe.

·Leave the syphon pipe cylinder standing and recharge it.

(By liquid refrigerant)

(2) Recharge in refrigerant leakage case

·After recovering the all refrigerant in the unit, proceed to working.

·Do not release the refrigerant in the air.

·After completing the repair service, recharge the cycle with the specified amount of

liquid refrigerant.

[1] Cautions for service

·After recovering the all refrigerant in the unit, proceed to working.

·Do not release refrigerant in the air.

·After completing the repair service, recharge the cycle with the specified amount of

liquid refrigerant.

Gravimeter

Unit

[3] Service tools

Use the below service tools as exclusive tools for R407C refrigerant.

No. Tool name Specifications

1Gauge manifold ·Only for R407C.

·Use the existing fitting SPECIFICATIONS. (UNF7/16)

·Use high-tension side pressure of 3.43MPa·G or over.

2Charge hose ·Only for R407C.

·Use pressure performance of 5.10MPa·G or over.

3Electronic scale

4Gas leak detector ·Use the detector for R134a or R407C.

5Adapter for reverse flow check. ·Attach on vacuum pump.

6Refrigerant charge base.

7Refrigerant cylinder. ·For R407C ·Top of cylinder (Brown)

·Cylinder with syphon

8Refrigerant recovery equipment.

OC357A--1.qxp 06.7.18 9:04 AM Page 3

Cautions for units utilising refrigerant R410A

CAUTIONS RELATED TO NEW REFRIGERANT

Use new refrigerant pipes.

Make sure that the inside and outside of refrige-

rant piping is clean and it has no contamination

such as sulfur hazardous for use, oxides, dirt,

shaving particles, etc.

In addition, use pipes with specified thickness.

Store the piping to be used during installation

indoors and keep both ends of the piping sealed

until just before brazing. (Leave elbow joints, etc.

in their packaging.)

Use ester oil, ether oil or alkylbenzene oil (small

amount) as the refrigerant oil applied to flares

and flange connections.

In case of using the existing pipes for R22, be careful with

the followings.

· For RP100, 125 and 140, be sure to perform replace-

ment operation before test run.

· Change flare nut to the one provided with this product.

Use a newly flared pipe.

· Avoid using thin pipes.

Charge refrigerant from liquid phase of gas

cylinder.

If the refrigerant is charged from gas phase, composition

change may occur in refrigerant and the efficiency will be

lowered.

Do not use refrigerant other than R410A.

If other refrigerant (R22 etc.) is used, chlorine in refrige-

rant can cause deterioration of refrigerant oil etc.

Use a vacuum pump with a reverse flow check

valve.

Vacuum pump oil may flow back into refrigerant cycle and

that can cause deterioration of refrigerant oil etc.

Use the following tools specifically designed for

use with R410A refrigerant.

The following tools are necessary to use R410A refrigerant.

Keep the tools with care.

If dirt, dust or moisture enter into refrigerant cycle, that can

cause deterioration of refrigerant oil or malfunction of com-

pressor.

Do not use a charging cylinder.

If a charging cylinder is used, the composition of refrigera-

nt will change and the efficiency will be lowered.

Flare tool

Electronic refrigerant

charging scale

Vacuum pump adaptor

Size adjustment gauge

Gauge manifold

Torque wrench

Gas leak detector

Charge hose

Tools for R410A

Contamination inside refrigerant piping can cause deterio-

ration of refrigerant oil etc.

If dirt, dust or moisture enter into refrigerant cycle, that can

cause deterioration of refrigerant oil or malfunction of com-

pressor.

If large amount of mineral oil enter, that can cause deterio-

ration of refrigerant oil etc.

Ventilate the room if refrigerant leaks during

operation. If refrigerant comes into contact with

a flame, poisonous gases will be released.

[1] Cautions for service

(1) Perform service after collecting the refrigerant left in unit completely.

(2) Do not release refrigerant in the air.

(3) After completing service, charge the cycle with specified amount of refrigerant.

(4) When performing service, install a filter drier simultaneously.

Be sure to use a filter drier for new refrigerant.

[2] Additional refrigerant charge

When charging directly from cylinder

· Check that cylinder for R410A on the market is syphon type.

· Charging should be performed with the cylinder of syphon stood vertically. (Refrigerant is charged from liquid phase.)

OC357A--1.qxp 06.7.18 9:04 AM Page 4

Gravimeter

Unit

[3] Service tools

Use the below service tools as exclusive tools for R410A refrigerant.

No. Specifications

1Gauge manifold ·Only for R410A

·Use the existing fitting specifications. (UNF1/2)

·Use high-tension side pressure of 5.3MPa·G or over.

2Charge hose ·Only for R410A

·Use pressure performance of 5.09MPa·G or over.

3Electronic scale

4Gas leak detector ·Use the detector for R134a, R407C or R410A.

5Adaptor for reverse flow check ·Attach on vacuum pump.

6Refrigerant charge base

7Refrigerant cylinder ·Only for R410A Top of cylinder (Pink)

Cylinder with syphon

8Refrigerant recovery equipment

OC357A--1.qxp 06.7.18 9:04 AM Page 5

PART NAMES AND FUNCTIONS

● Operation buttons

PAR-21MAA

ON/OFF

FILTER

CHECK

OPERATION

CLEAR

TEST

TEMP.

BACK DAY

MONITOR/SET

CLOCK

ON/OFF

Set Temperature buttons

Down

Timer Menu button

(Monitor/Set button)

Mode button (Return button)

Set Time buttons

Back

Ahead

Timer On/Off button

(Set Day button)

Opening the

door.

ON/OFF button

Fan Speed button

Filter button

(<Enter> button)

Test Run button

Check button (Clear button)

Airflow Up/Down button

Louver button

( Operation button)

To preceding operation

number.

Ventilation button

(Operation button)

To next operation number.

On the controls are set, the same operation mode can be repeated by simply pressing the ON/OFF button.

Auto Air Swing Vane

Disperses airflow up and

down and adjusts the angle

of airflow direction.

Grille

Filter

Removes dust and pollutants

from intake air

Horizontal Air Outlet

Sets airflow of horizontal automatically

during cooling or dehumidifying.

Air Intake

Intakes air from room.

● Indoor Unit

● Wired remote controller

OC357A--1.qxp 06.7.18 9:04 AM Page 6

●Display

For purposes of this explanation,

all parts of the display are shown

as lit. During actual operation, only

the relevant items will be lit.

˚F˚C

ERROR CODE

AFTER

TIMER

TIME SUN MON TUE WED THU FRI SAT

OFF

AFTER

FILTER

FUNCTION

ONLY1Hr.

WEEKLY

SIMPLE

AUTO OFF

Identifies the current operation

Shows the operating mode, etc.

* Multilanguage display is sup-

ported.

“Centrally Controlled” indicator

Indicates that operation of the re-

mote controller has been prohib-

ited by a master controller.

“Timer Is Off” indicator

Indicates that the timer is off.

Temperature Setting

Shows the target temperature.

Day-of-Week

Shows the current day of the week.

Time/Timer Display

Shows the current time, unless the simple or Auto Off

timer is set.

If the simple or Auto Off timer is set, shows the time

remaining.

“Sensor” indication

Displayed when the remote controller

sensor is used.

“Locked” indicator

Indicates that remote controller but-

tons have been locked.

“Clean The Filter” indicator

Comes on when it is time to clean the

filter.

Timer indicators

The indicator comes on if the corre-

sponding timer is set.

Up/Down Air Direction indica-

tor

The indicator shows the direc-

tion of the outcoming airflow.

“One Hour Only” indicator

Displayed if the airflow is set to

weak and downward during COOL

or DRY mode. (Operation varies

according to model.)

The indicator goes off after one

hour, at which time the airflow di-

rection also changes.

Room Temperature display

Shows the room temperature.

Louver display

Indicates the action of the swing

louver. Does not appear if the

louver is stationary.

(Power On indicator)

Indicates that the power is on.

Fan Speed indicator

Shows the selected fan speed.

Ventilation indicator

Appears when the unit is running in

Ventilation mode.

Caution

●Only the Power on indicator lights when the unit is stopped and power supplied to the unit.

●If you press a button for a feature that is not installed at the indoor unit, the remote controller will display the “Not Available”

message.

If you are using the remote controller to drive multiple indoor units, this message will appear only if he feature is not

present at the parent unit.

●When power is turned ON for the first time, it is normal that “PLEASE WAIT” is displayed on the room temperature indica-

tion (For max. 2minutes). Please wait until this “PLEASE WAIT” indication disappear then start the operation.

OC357A--1.qxp 06.7.18 9:04 AM Page 7

ON/OFF TEMP

FAN

VANE

TEST RUN

AUTO STOP

AUTO START

min

LOUVER

MODE

CHECK

RESETSET CLOCK

MODEL SELECT

NOT AVAILABLE

CHECK

TEST RUN

˚C

AMPM

VANE CONTROL button

Used to change the air flow direction.

CLOCK button

RESET button

SET button

ON/OFF button

The unit is turned ON and OFF alternately

each time the button is pressed.

LOUVER button

This switch the horizontal fan motion ON

and OFF.

(Not available for this model.)

MODE SELECT button

Used to switch the operation mode between

cooling, drying, blowing, heating and auto

mode.

CHECK-TEST RUN button

Only press this button to perform an inspec-

tion check or test operation.

Do not use it for normal operation.

FAN SPEED SELECT button

Used to change the fan speed.

TIMER display

Displays when in timer operation or when

setting timer.

button

SET TEMPERATURE button sets any desired

room temperature.

CLOCK display

Displays the current time.

“” “ ” display

Displays the order of timer operation.

“ ” “ ” display

Displays whether timer is on or off.

wIn case the outdoor unit is cool only type,

the heating mode is not available.

Buttons used to set the “hour and minute” of

the current time and timer settings.

h and min buttons

display

SET TEMP. display indicates desired temper-

ature set.

display

FAN SPEED display indicates which fan

speed has been selected.

display

The vertical direction of air flow is indicated.

display

Blinks when model is selected.

display

Lights up while transmission to the indoor

unit is mode using switches.

display

CHECK&TEST RUN display indicates that

the unit is being checked or test-run.

display

OPERATION MODE display

Operation mode display indicates which op-

eration mode is in effect.

TIMER CONTROL buttons

AUTO STOP (OFF timer): when this switch

is set, the air conditioner will be au-

tomatically stopped at the preset time.

AUTO START (ON timer): when this switch

is set, the air conditioner will be automatical-

ly started at the preset time.

MODEL SELECT

CHECK

TEST RUN

● Wireless remote controller

OC357A--1.qxp 06.7.18 9:04 AM Page 8

SPECIFICATIONS

Cooling

0.18

0.92

Heating

0.18

0.92

Single phase, 50Hz, 230V

Munsell 0.70Y 8.59/0.97

Plate fin coil

Turbo fan (direct) o1

0.120

19-21-23-27(670-740-810-950)

0(direct blow)

–

Remote controller & built-in

33-36-39-41

32(1-1/4)

K/min(CFM)

Pa(mmAq)

mm(in.)

kg(lbs)

INDOOR UNIT

PLA-RP100AA2.UK

Service Ref.

Mode

Power supply(phase, cycle, voltage)

Input

Running current

External finish (Panel)

Heat exchanger

Fan Fan(drive) oNo.

Fan motor output

Airflow(Low-Medium2-Medium1-High)

External static pressure

Booster heater

Operation control & Thermostat

Noise level(Low-Medium2-Medium1-High)

Unit drain pipe I.D.

Dimensions

Weight

UNIT : 840 (33-1/16) PANEL : 950 (37-3/8)

UNIT : 298 (11-3/4) PANEL : 30 (1-3/16)

UNIT : 32 (71) PANEL : 5 (11)

Cooling

0.18

0.92

Heating

0.18

0.92

Single phase, 50Hz, 230V

Munsell 0.70Y 8.59/0.97

Plate fin coil

Turbo fan (direct) o1

0.120

24-25-27-30(850-880-950-1,060)

0(direct blow)

–

Remote controller & built-in

37-40-43-45

32(1-1/4)

K/min(CFM)

Pa(mmAq)

mm(in.)

kg(lbs)

INDOOR UNIT

PLA-RP125AA2.UK

Service Ref.

Mode

Power supply(phase, cycle, voltage)

Input

Running current

External finish (Panel)

Heat exchanger

Fan Fan(drive) oNo.

Fan motor output

Airflow(Low-Medium2-Medium1-High)

External static pressure

Booster heater

Operation control & Thermostat

Noise level(Low-Medium2-Medium1-High)

Unit drain pipe I.D.

Dimensions

Weight

UNIT : 840 (33-1/16) PANEL : 950 (37-3/8)

UNIT : 298 (11-3/4) PANEL : 30 (1-3/16)

UNIT : 32 (71) PANEL : 5 (11)

K/min(CFM)

Pa(mmAq)

mm(in.)

kg(lbs)

Service Ref.

Mode

Power supply(phase, cycle, voltage)

Input

Running current

External finish (Panel)

Heat exchanger

Fan Fan(drive) x No.

Fan motor output

Airflow(Low-Medium2-Medium1-High)

External static pressure

Booster heater

Operation control & Thermostat

Noise level(Low-Medium2-Medium1-High)

Unit drain pipe I.D.

Dimensions

Weight

INDOOR UNIT

PLA-RP140AA2.UK

Cooling

0.18

0.92

Heating

0.18

0.92

Single phase, 50Hz, 230V

Munsell 0.70Y 8.59/0.97

Plate fin coil

Turbo fan (direct) o1

0.120

24-25-27-30(850-880-950-1,060)

0(direct blow)

–

Remote controller & built-in

37-40-43-45

32(1-1/4)

UNIT : 840 (33-1/16) PANEL : 950 (37-3/8)

UNIT : 298 (11-3/4) PANEL : 30 (1-3/16)

UNIT : 32 (71) PANEL : 5 (11)

OC357A--1.qxp 06.7.18 9:04 AM Page 9

5NOISE CRITERION CURVES

PLA-RP100AA2.UK NOTCH SPL(dB) LINE

10 63 125 250 500 1000 2000 4000 8000

APPROXIMATE

THRESHOLD OF

HEARING FOR

CONTINUOUS

NOISE

NC-60

NC-50

NC-40

NC-30

NC-20

NC-70

BAND CENTER FREQUENCIES, Hz

High

Medium1

Medium2

Low

OCTAVE BAND SOUND PRESSURE LEVEL, dB (0 dB = 0.0002 µbar)

PLA-RP125AA2.UK NOTCH SPL(dB) LINE

10 63 125 250 500 1000 2000 4000 8000

APPROXIMATE

THRESHOLD OF

HEARING FOR

CONTINUOUS

NOISE

NC-60

NC-50

NC-40

NC-30

NC-20

NC-70

OCTAVE BAND SOUND PRESSURE LEVEL, dB (0 dB = 0.0002 µbar)

BAND CENTER FREQUENCIES, Hz

High

Medium1

Medium2

Low

UNIT

1.5m

MICROPHONE

CEILING

PLA-RP140AA2.UK NOTCH SPL(dB) LINE

OCTAVE BAND SOUND PRESSURE LEVEL, dB (0 dB = 0.0002 µbar)

10 63 125 250 500 1000 2000 4000 8000

APPROXIMATE

THRESHOLD OF

HEARING FOR

CONTINUOUS

NOISE

NC-60

NC-50

NC-40

NC-30

NC-20

NC-70

BAND CENTER FREQUENCIES, Hz

High

Medium1

Medium2

Low

OC357A--1.qxp 06.7.18 9:04 AM Page 10

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Mitsubishi Electric Climatiseur

Mitsubishi Electric

Mitsubishi Electric PEAD Series Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Mr. Slim PL-3AK Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MLZ-KA25VA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PU-ZRP200YKA3 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PFFY-P20VKM-E Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MSZ-A18YV Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PKFY-P32VHM-ER2 Manuel d'utilisation

Mitsubishi Electric

Mitsubishi Electric SUZ-KA09NAHZ Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MSZ-HR60VF Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MFZ-KA25VA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MSZ-FH09NA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Mr.Slim PUZ-A18NHA4R1 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Fresh Master GUF-50RDH4 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PUHZ-ZRP35VKA2 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MSZ-AP60VG Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MSY-GJ10VA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PEFY-P40VMH-A Manuel d'utilisation

Mitsubishi Electric

Mitsubishi Electric MS-GF50VA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric TRANE CITY MULTI TPKFYP004LM140A Manuel d'utilisation

Mitsubishi Electric

Mitsubishi Electric CITY MULTI PQHY-P-ZLMU Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Starmex MSY-GE10VA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MXZ-2D33VA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Mr.Slim PKA Series Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PCA-RP71HA PCA-RP71HA Manuel utilisateur

Manuels Climatiseur populaires d'autres marques

Spheros

Spheros CC 355 Manuel utilisateur

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manuel utilisateur

Panasonic

Panasonic CS-E12HKEW Manuel utilisateur

nedis

nedis ACMB1WT7 Manuel utilisateur

Samsung

Samsung AR KV Series Mode d’emploi

Daikin

Daikin FCFV50A Manuel utilisateur

Fujitsu

Fujitsu Inverter ASBA30JFC Manuel utilisateur

Toshiba

Toshiba RAS-M10SMUV-E Manuel utilisateur

Daikin

Daikin FXLQ20MAVE Manuel utilisateur

Hitachi

Hitachi RAS-E24CAK Manuel utilisateur

CIAT

CIAT Magister 2 Series Mode d’emploi

Bestron

Bestron AAC6000 Manuel utilisateur

Hisense

Hisense 7K Manuel technique

Frigidaire

Frigidaire FFRE0533S1E0 Manuel utilisateur

Samsung

Samsung AS09HM3N Manuel utilisateur

Frigidaire

Frigidaire CRA073PU11 Manuel du propriétaire

Soleus Air

Soleus Air GB-PAC-08E4 Manuel utilisateur

McQuay

McQuay MCK020A Manuel utilisateur