Mitel T7100 Manuel utilisateur
3300 CITELlink Gateway
for 7000 Series Norstar Phones
T7100 Phone User Guide
NOTICE
The information contained in this document is believed to be accurate in all respects but is not warranted by MITEL NETWORKSJ
Corporation. The information is subject to change without notice and should not be construed in any way as a commitment by MITEL
NETWORKS or any of its affiliates or subsidiaries. MITEL NETWORKS and its affiliates and subsidiaries assume no responsibility for any
errors or omissions in this document. Revisions of this document or new editions of it may be issued to incorporate any such
changes.
Nothing in this document may be reproduced in any manner, either wholly or in part for any use whatsoever, without written
permission from MITEL NETWORKS Corporation.
IMPORTANT! This telephone is NOT suitable for direct connection to the public-switched telephone network. Connect the telephone
to a Mitel Networks system only.
Mitel Networks is a trademark of Mitel Networks Corporation.
CITELlink is a trademark of CITEL Technologies Ltd.
Nortel Networks is a trademark of Nortel Networks Corporation.
Other product names mentioned in this document may be trademarks of their respective companies and are hereby acknowledged.
-i-
Contents
ABOUT YOUR PHONE 1
Conventions 2
Using Your Norstar Phone with the 3300 CITELlink Gateway 2
TIPS FOR YOUR COMFORT AND SAFETY 2
Don't cradle the handset! 2
Protect your hearing 2
CUSTOMIZING YOUR PHONE 3
Ringer Control 3
Handset Receiver Volume Control 3
Speaker Volume Control 3
Display Contrast Control 3
Language Change 4
MAKING AND ANSWERING CALLS 4
Make a call 4
Answer a call 4
Redial 4
Redial - Saved Number 4
Speed Call - Personal 5
On-Hook Dialing 5
-ii-
CALL HANDLING 5
Temporary Hold 5
Transfer 6
Conference 6
Conference Split 6
Call Forward 7
Call Forward - Remote 8
Call Forward - End Chaining 8
Call Forward - Override 9
Messaging - Advisory 9
Messaging - Callback 9
Messaging - Cancel Callback 10
Messaging - Cancel All Callbacks 10
USING ADVANCED FEATURES 10
Account Codes 10
Call Park 11
Call Pickup 11
Campon 11
Do Not Disturb 12
Override 12
Paging 12
Direct Paging 13
Group Paging / Meet Me Answer 14
Trunk Flash 14
Tag Call 15
-1-
ABOUT YOUR PHONE
The Mitel Networks 3300 CITELlink Gateway allows your Nortel Networks™
Norstar phone to work on a Mitel Networks 3300 Inte
g
rated Communications
Platform (3300 ICP).
When used with a 3300 ICP, your T7100 phone has six fixed-function keys (
(SUPERKEY), (TRANS/CONF), (CANCEL), DOWN ARROW, ,
).
Your phone also features display-assisted selection of features, on-hook
dialing, and an incoming call indicator light (above display).
Phone buttons
Button Number
Description
1 Cancel
2 Down Arrow
3 Transfer/Conference
4 Superkey
-2-
Conventions
The following conventions are used in this user guide:
zFixed-function keys are identified by bold uppercase letters (for example,
TRANS/CONF ).
zText that appears on the display is identified by double quotes (for
example, "Language?").
Using Your Norstar Phone with the 3300 CITELlink Gateway
Please note the following differences in the way your phone now operates:
zAlthough there is no HOLD key, you can still place a call on temporary
hold.
zSome features require you to dial a feature access code. You can use
feature access codes whenever you have dial tone. The feature access
codes in this user guide may be different from the ones programmed in
your system. Ask your Administrator for the list of feature access codes
you can use.
zWhen you have a message (including new voice mail messages),
"Message" appears on the display.
zYou do not need to select a line before dialing a number. See On-hook
Dialing in the Making and Answering Calls section for more information.
TIPS FOR YOUR COMFORT AND SAFETY
Don't cradle the handset!
Prolon
g
ed use of the handset can lead to neck, shoulder, or back discomfort,
especially if you cradle the handset between your ear and shoulder.
Protect your hearing
Your phone has a control for adjusting the volume of the handset receiver.
Because continuous exposure to loud sounds can contribute to hearing loss,
keep the volume at a moderate level.
-3-
CUSTOMIZING YOUR PHONE
Ringer Control
To adjust the Ringer Volume while the phone is ringing:
zPress or .
To adjust the Ringer Pitch while the phone is idle:
1. Press .
2. Press # (No) until "Ringer Adjust?" appears.
3. Press * (Yes).
4. To adjust the ringer pitch, press * (Yes). To adjust the ringer volume,
press # (No), then * (Yes).
5. Press or until you hear the desired pitch/volume.
6. Press # (Save).
7. Press .
Handset Receiver Volume Control
To adjust the Handset Receiver Volume when you are using the
handset:
zPress or .
Speaker Volume Control
To adjust the Speaker Volume when making an on-hook call or when
listening to background music:
zPress or .
Display Contrast Control
To adjust the Display Contrast while your phone is idle:
zPress DOWN ARROW.
-4-
Language Change
To change the display language:
1. Press .
2. Press # (No) until "Language?" appears.
3. Press * (Yes).
4. Press * (Change).
5. Press # (No) until the desired language appears.
6. Press * (Yes).
MAKING AND ANSWERING CALLS
Make a call
1. Lift the handset.
2. Dial the number.
Answer a call
zLift the handset.
Redial
To redial the last number that you manually dialed:
1. Lift the handset.
2. Dial *01
Redial - Saved Number
To save the last number that you manually dialed:
1. Lift the handset.
2. Dial **79.
To Redial a saved number:
1. Lift the handset.
2. Dial *6*.
-5-
Speed Call - Personal
Note: Personal Speed Call lists must be configured by the Administrator.
To store a personal Speed Call number:
1. Lift the handset.
2. Dial 67.
3. Enter an index number between 00 and 09.
4. Dial the number to be stored.
5. Hang up.
To dial a stored personal Speed Call number:
1. Lift the handset.
2. Dial 58.
3. Enter an index number between 00 and 09.
On-Hook Dialing
To dial without lifting the handset:
1. If you want to use a Non-Prime Line, press a Line Appearance key.
2. Dial the number.
3. Lift the handset.
CALL HANDLING
Temporary Hold
To place a call on temporary hold
zPress .
To retrieve a call from temporary hold
zHang up or press . The held call automatically calls back your phone.
Note: A call placed on temporary hold will automatically call back your
phone after 1 minute.
-6-
Transfer
To Transfer an active call:
1. Press .
2. Dial the number of the third party.
3. Do one of the following:
To complete the Transfer, hang up.
To announce the Transfer, wait for an answer, consult, and hang up.
To cancel the Transfer, press .
Conference
To form a Conference when a two-party call is already in place, or to
add another party to an existing Conference:
1. Press .
2. Dial the number of the next party.
3. Wait for an answer.
4. Press .
To leave a Conference:
zHang up.
Conference Split
To Split a Conference and speak privately with the original party:
1. Press .
2. Dial *41.
To return to the conference call:
zPress .
Table des matières
Autres manuels Mitel Téléphone
Mitel
Mitel Deskphone 6867 Manuel utilisateur
Mitel
Mitel 3300 IP 5312 IP Manuel utilisateur
Mitel
Mitel Deskphone 6863 Manuel utilisateur
Mitel
Mitel SmarT-1 EuroRoute Mode d'emploi
Mitel
Mitel SX-200 EL Manuel d'installation et d'exploitation
Mitel
Mitel 200 Manuel utilisateur
Mitel
Mitel Connected Guests InnLine IP Manuel utilisateur
Mitel
Mitel OfficeSuite UC 6930 Manuel utilisateur
Mitel
Mitel Deskphone 6869 Manuel utilisateur
Mitel
Mitel MiVoice 6920w Manuel utilisateur
Mitel
Mitel SX-2000 Superconsole 2000 Manuel utilisateur
Mitel
Mitel 8660 Manuel utilisateur
Mitel
Mitel 5560 IPT none Manuel utilisateur
Mitel
Mitel SUPERSET 4001 Manuel utilisateur
Mitel
Mitel 5055 Manuel utilisateur
Mitel
Mitel 8568 Manuel utilisateur
Mitel
Mitel Deskphone 6863 Manuel utilisateur
Mitel
Mitel MIVOICE OFFICE 250 Manuel utilisateur
Mitel
Mitel Deskphone 6865 Manuel utilisateur
Mitel
Mitel TUI Manuel utilisateur
