Mitel 6300 Series Manuel de l'opérateur
6300 Series Analog Phones
ADMINISTRATION INFORMATION
58014967 REV00
NOTICE
The information contained in this document is believed to be accurate in all respects but is not warranted
by Mitel Networks™ Corporation (MITEL®). The information is subject to change without notice and should
not be construed in any way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its
affiliates and subsidiaries assume no responsibility for any errors or omissions in this document. Revisions
of this document or new editions of it may be issued to incorporate such changes.
No part of this document can be reproduced or transmitted in any form or by any means - electronic or
mechanical - for any purpose without written permission from Mitel Networks Corporation.
Trademarks
The trademarks, service marks, logos and graphics (collectively “Trademarks”) appearing on Mitel's
Internet sites or in its publications are registered and unregistered trademarks of Mitel Networks
Corporation (MNC) or its subsidiaries (collectively “Mitel”) or others. Use of the Trademarks is prohibited
without the express consent from Mitel. Please contact our legal department at [email protected] for
additional information. For a list of the worldwide Mitel Networks Corporation registered trademarks, please
refer to the website: http://www.mitel.com/trademarks.
6300 Series Analog Phones Administration Information
58014967 REV00 - September 2016
®,™ Trademark of Mitel Networks Corporation
© Copyright 2016, Mitel Networks Corporation
All rights reserved
Table of Contents
iii
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Supporting Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Administrator Options menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Reset data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Resetting data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Quickly resetting all user-related data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Locking/Unlocking the Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
6300 Series Analog Phone Administration Information
1
Preface
This 6300 Series Analog Phone Administrator Information Application Note is a document intended
to be used by trained, qualified service personnel (e.g. System Administrators, Installers, and
Support personnel) who need to understand how to reset data on the phone as well as lock and
unlock Directory functionality.
Notes:
1. The information contained in this Application Note is not intended for end users.
2. For information on basic installation and physical setup information, refer to the 6390/6392
Installation Guide included with the phone.
3. For information on phone features and configuration options, refer to the 6390/6392 User
Guide.
Supporting Documentation
To access phone and system-specific documentation:
1. In your browser, go to http://www.mitel.com.
2. Click Product Manuals under the Support section.
3. Select PDF Guides and Online Help under the End User Documents drop-down menu.
4. In the left-hand menu, navigate to Analog Phones.
Administrator Options menu
2
Administrator Options menu
An Administrator Options menu is available on the 6300 Series analog phones allowing
Administrators the ability to reset data stored on the phone as well as lock/unlock the Directory.
Admin options
Done-
Directory--Reset data
The Administrator Options menu should not be used by end users and therefore it is a hidden menu
accessible only by pressing the following key sequence:
1. Press and release the key.
2. Press and release the key.
3. Press and release the #key on the dialpad.
The Administrator Options menu is displayed on screen.
Reset data
When you select the Reset data option, you can choose to reset user data, Directory data, or all data.
Reset data
Done-
-User data
-Directory
-All
Reset:
User data encompasses Callers List entries, Redial List entries, configured memory keys, and
defined screen text. Directory data encompasses only the Directory entries.All data resets the phone
to factory defaults.
6300 Series Analog Phone Administration Information
3
Resetting data
1. Press and release the key.
2. Press and release the key.
3. Press and release the #key on the dialpad.
The Administrator Options menu is displayed on screen.
4. Press the Reset data softkey.
5. Press the User data softkey to reset all user-related data
or
Press the Directory softkey to reset all Directory-related data
or
Press the All softkey to reset the phone to factory defaults.
6. Press the Confirm softkey to confirm the reset
or
Press the Quit softkey to quit without resetting.
7. Press the Done softkey to return to the Admin options menu.
Quickly resetting all user-related data
The following shortcut is also available for Administrators that want to quickly reset all user-related
data (i.e. factory default) the phone:
1. Press and release the key.
2. Press and release the key.
3. Press and release the *key on the dialpad twice.
The Reset data menu is displayed on screen and the "All" option is already selected.
4. Press the Confirm softkey to confirm the reset
or
Press the Quit softkey to quit without resetting.
5. Press the Done softkey to return to the Admin options menu.
Administrator Options menu
4
Directory
When you lock the Directory, users are not permitted to add, edit, or delete Directory entries (i.e.
the AddNew, Change, and Delete softkeys will not be displayed on screen.) Users will only be able
to dial a Directory entry or quit the Directory menu.
Directory
Done-
-Lock
-Unlock
Directory unlocked
Locking/Unlocking the Directory
1. Press and release the key.
2. Press and release the key.
3. Press and release the #key on the dialpad.
The Administrator Options menu is displayed on screen.
4. Press the Directory softkey.
5. Press the Lock softkey to lock the Directory or Unlock softkey to unlock the Directory.
When the Directory is locked a "Directory locked" message displays on screen and when the
Directory is unlocked a "Directory unlocked" message displays on screen.
6. Press the Done softkey to return to the Admin options menu.
Table des matières
Autres manuels Mitel Téléphone
Mitel
Mitel sx-100 Manuel utilisateur
Mitel
Mitel 6873i Manuel utilisateur
Mitel
Mitel 3000 Manuel utilisateur
Mitel
Mitel 6865i Manuel utilisateur
Mitel
Mitel 8568 Manuel utilisateur
Mitel
Mitel 6873i Manuel utilisateur
Mitel
Mitel Deskphone 6869 Manuel utilisateur
Mitel
Mitel 8568 Manuel utilisateur
Mitel
Mitel MiVOICE 6920 Manuel utilisateur
Mitel
Mitel 3000 Manuel utilisateur
Mitel
Mitel 6735 Manuel utilisateur
Mitel
Mitel MIVOICE OFFICE 250 Manuel utilisateur
Mitel
Mitel Mivo 250 Manuel utilisateur
Mitel
Mitel Superset 4015 Manuel utilisateur
Mitel
Mitel 6800 Series Manuel utilisateur
Mitel
Mitel Inter-Tel Axxess Manuel de service
Mitel
Mitel 8568 Manuel utilisateur
Mitel
Mitel MIVOICE 8528 Mode d’emploi
Mitel
Mitel Deskphone 6863 Manuel utilisateur
Mitel
Mitel 6735i Manuel utilisateur
