Mircom BL-10B Manuel utilisateur

MOTORIZED STEEL BELLS BL-6B/BL-10B

Description

Mircom’s BL-6B and BL-10B Motorized Steel Bells

are designed for today’s re alarm applications. The

durable steel construction provides loud resonant

tones necessary for re alarm installations.

The BL-6B and BL-10B bells use a varistor

suppression element to prevent RFI and EMF noise

problems to modern re alarm control panels.

The motor used on the BL-6B and BL-10B bells

operate at a very low current (20 mA) to maximize

the number of bells per circuit. Both models are

equipped with a pigtail connection for wiring.

Both the BL-6B and BL-10B mount on a standard

4” square electrical box for indoor use or on a

BB-206WP weatherproof backbox for outdoor

applications. Mounting on a 4” octagon outlet box

requires the MP-101 Universal Mounting Plate.

Features

• Low current draw (20 mA)

• 6 and 10 inch diameter steel shells for long term

reliability

• RFI and EMF suppression prevents noise

problems to the re alarm control panel

• Polarized for DC supervision

• Pigtail connection

• Standard 4 inch square electrical box

mounting

• Weatherproof backbox available for outdoor

applications

• Red nish

Mircom reserves the right to make changes at any time without notice in prices, colours, materials, components, equipment, specications and models and also to discontinue models.

Dimensions

NOT TO BE USED FOR INSTALLATION PURPOSES.

5261

S5375 S5375

CATALOG NUMBER

7135-1477:152

Canada

25 Interchange Way

Vaughan, Ontario L4K 5W3

Telephone: (905) 660-4655

Fax: (905) 660-4113

Web page: http://www.mircom.com Email: [email protected]

Distributed by:

CAT. 5261

Rev. 3

Installation Instructions

NOT TO BE USED FOR INSTALLATION PURPOSES.

Specications

U.S.A.

4575 Witmer Industrial Estates

Niagara Falls, NY 14305

Toll Free: (888) 660-4655

Fax Toll Free: (888) 660-4113

Model Description

BL-6B 6” Motorized Steel Bell

BL-10B 10” Motorized Steel Bell

Accessories

BB-206WP Weatherproof Backbox

MP-101 Universal Mounting Plate

M-1995 Yard Hood

SG-210 Grill for 10” Bell Backbox

Ordering Informtion

4“ SQUARE OUTLET BOX

GASKET FOR

MOUNTING

ON SURFACE OR

WEATHERPROOF

BACKBOX

HEX-BOLT GONG

STRIKER

BB-206WP

WEATHERPROOF

BACKBOX

WIRING (REAR VIEW)

D.C. BELLS (OBSERVE POLARITY)

NO MORE

THAN -6dB

NO MORE

THAN -6dB

HORIZONTAL AXIS

Model Description Voltage Rated Current Sound Level at 10 ft. dB

BL-6B 6” Motorized Steel Bell 24 VDC 20 mA 86

BL-10B 10” Motorized Steel Bell 24 VDC 20 mA 90

Installation Instructions:

1. Remove the bell.

2. Wire the bell in the circuit.

3. Mount ball mechanism on 4” square standard outlet box with

the striker facing down.

4. Replace the bell.

5. The bell must be mounted a minimum of 8 ft. above the oor,

or as close to the ceiling as possible.

6. Polarized bell provides red(+) and black(-) lead wires.

When you install the bell, polarity must be observed.

Caution:

When electrical supervision is required, use in and out leads as shown.

Notes:

1. Observe polarity.

2. Red wires positive (+).

3. Black wires negative (-).

4. For installation in Canada, installation must comply to

Canadian Electrical Code, Part 1, ULC-S524-01, the standard

for the installation of re alarm system, and only subject to

nal acceptance of local AHJ.

5. For indoor use: Motor re bell only.

6. For outdoor use: Motor re alarm bell attached to waterproof

box only.

7. Mounting to a 4” octagon box requires MP-101 mounting plate.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Mircom Système de sécurité

Mircom

Mircom MS-700MP Series Guide de démarrage rapide

Mircom

Mircom Fire-Link NMC-100 Series Manuel utilisateur

Mircom

Mircom FA-300-6DDR Manuel utilisateur

Mircom

Mircom Flex-Net Phase II Guide de l'utilisateur

Mircom

Mircom QX-mini Mode d'emploi

Mircom

Mircom FX-350 Series Manuel utilisateur

Mircom

Mircom MS-400AP Series Manuel utilisateur

Mircom

Mircom flexnet Manuel utilisateur

Mircom

Mircom FA-101T Manuel utilisateur

Mircom

Mircom QX-5000 Series Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur