Mircom TX3 Series Feuille d'instructions

Version 3.2 TX3 Nano Configuration Manual 1

LT-1194 Copyright September 2019

TX3 Series

TX3 Nano

Configuration

Manual

2TX3 Nano Configuration Manual Version 3.2

LT-1194 Copyright September 2019

TX3 Nano Configuration Manual Version 3.2

Microsoft, MS-DOS, Windows, and Windows 2000/NT/XP/Vista/7/8/10 are either registered

trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Mircom

25 Interchange Way

Vaughan, Ontario

L4K 5W3

905.660.4655

http://www.mircom.com

TX3 Nano Configuration Manual 3

Contents

1 Introduction 6

1.1 TX3 Nano Features 6

1.2 Networking 7

1.3 ADC and NSL 8

1.4 Types of Calls 8

1.5 Administrator’s Responsibilities 11

1.6 TX3 Nano Products 12

1.7 Additional Documentation 12

2 TX3 Nano Configurator 13

2.1 Passwords 13

2.2 Sign into the Configurator 13

2.3 Global Settings 16

2.4 Backup and Restore 18

2.5 Factory Reset 19

2.6 Screensaver 20

2.7 Sign Out 20

3 TX3 Nano Settings 21

3.1 Overview 22

3.2 TX3 Nano Network 22

3.3 Nano Settings 23

3.4 Restart the TX3 Nano 23

3.5 Speaker Volume 23

3.6 Tamper Alarm 23

3.7 Enhanced Correlation Messages 24

3.8 Calls 24

3.9 Resident Access Schedules 25

3.10 Keypad 25

3.11 SIP Account Details 26

3.12 Update the TX3 Nano Software 27

3.13 Inputs and Outputs 29

3.14 Access Point 32

3.15 Correlations 33

3.16 Configure other TX3 Nanos 36

4 Residents 40

4.1 View Residents 40

4.2 Import Residents from a TX3 Telephone Entry Panel 41

4.3 Add Residents 42

4.4 Enable Elevator Restriction 44

4.5 Delete Residents 45

4.6 Edit Residents 46

4.7 Grouping 46

5 Schedules and Holidays 49

5.1 Create Schedules and Holidays 49

4TX3 Nano Configuration Manual

Contents

5.2 Delete a Schedule or Holiday 52

5.3 Edit a Schedule or Holiday 52

5.4 Hide a Schedule or Holiday 52

5.5 View the Calendar 53

6 Elevators 54

6.1 Add Elevator Restriction Units 55

6.2 Add Floor Groups 56

6.3 Add Elevator Restriction Information to Residents 57

7 Events 58

7.1 View Events 58

7.2 Sort and Find Events 59

7.3 Export Events 59

8 Using the TX3 Nano 61

8.1 Overview 61

8.2 The TX3 Nano Buttons 61

8.3 The TX3 Nano Display 62

8.4 Screensaver 63

8.5 Panel Settings 63

9 Access Criteria 69

9.1 Lock and Unlock the Door 69

9.2 Timers 70

9.3 Call Restrictions 70

9.4 System Status 70

10 Warranty and Warning Information 72

TX3 Nano Configuration Manual 5

Figures

Figure 1. TX3 Nano on an IP Network 7

Figure 2. PSTN call 8

Figure 3. Cellular call 9

Figure 4. VOIP Call with OnSIP and MiEntry 10

Figure 5. VOIP Call with local Kamailio server 10

Figure 6. Sign in page 14

Figure 7. Please change password 15

Figure 8. TX3 Nano Configurator 16

Figure 9. Backup and Restore 18

Figure 10. Nano Settings 22

Figure 11. TX3 Nano Network 22

Figure 12. SIP Account Details 26

Figure 13. Configurator and application version 28

Figure 14. Input & Outputs 30

Figure 15. Access Point 32

Figure 16. Correlations diagram 34

Figure 17. Correlations 34

Figure 18. TX3 Nano Network 36

Figure 19. Discovered 37

Figure 20. Residents 40

Figure 21. Add Resident 42

Figure 22. Add Residents - second window 43

Figure 23. Enable Elevator Restriction Unit 45

Figure 24. The list of residents 47

Figure 25. Resident Groups 47

Figure 26. List of residents in the Resident Group C 48

Figure 27. Schedules 50

Figure 28. Add Schedule 50

Figure 29. Elevator 55

Figure 30. TX3 Configuration and Monitoring Utility Elevator Floor Group

Configuration 56

Figure 31. Events 58

Figure 32. Export menu 59

Figure 33. Front of the TX3 Nano 61

Figure 34. The TX3 Nano display 62

Figure 35. Panel Settings screen 64

6TX3 Nano Configuration Manual

1 Introduction

This manual provides information about the configuration of the TX3 Nano, and

must be read in its entirety before beginning any configuration work.

Note: Mircom periodically updates panel firmware and

Configurator Software to add features and correct any minor

inconsistencies. For information about the latest firmware or

software visit the Mircom website at www.mircom.com.

For warranty and special notices see the Warranty and Special Notices chapter

on page 72.

This chapter explains

• TX3 Nano Features

•Networking

• ADC and NSL

• Types of Calls

• Administrator’s Responsibilities

• TX3 Nano Products

• Additional Documentation

1.1 TX3 Nano Features

Mircom’s TX3 Nano is an IP networkable audio and video entry panel

providing multiple options to communicate with the resident or concierge in a

multi-unit dwelling establishment.

Features of the TX3 Nano include:

• High quality intercom and paging device

• Programmable scrolling 4.3” color LCD display

• Speaker and microphone for two way audio

• Ability to make calls over PSTN and cellular network

• Ability to make one-way video calls over VOIP

• Color camera with IR LED for night vision

Introduction

TX3 Nano Configuration Manual 7

• Touch buttons for scrolling the directory and making calls

• Storage of up to 1000 names

• Hands-free full duplex communication

• Dials up to 20 digit telephone numbers

• System can be configured over an IP network using a Web-based

configurator

1.2 Networking

By default, the TX3 Nano is assigned an IP address from a DHCP server.

DHCP (Dynamic Host Configuration Protocol) is a way of assigning IP

addresses to devices on a network.

The TX3 Nano can be connected to an existing TX3 network, as shown in

Figure 1. The TX3 Nano supports IPv4 addresses. The TX3 Nano and other TX3

devices can communicate with each other through correlations.

Figure 1. TX3 Nano on an IP Network

8TX3 Nano Configuration Manual

Introduction

1.3 ADC and NSL

The TX3 Nano supports 1 ADC or 1 NSL telephone line.

An ADC (autodialer controller) connection requires a dedicated subscriber

telephone line service connected to an outside telephone line. This connection

lets the visitor call the tenant and access their voice mail.

An NSL (no subscriber line) connection uses the existing building telephone

lines for communication and does not require a separate telephone line. This

system may consist of one or more TX3 Nanos connected to TX3-NSL-8M NSL

Units, typically located in the electrical/telephone room of a building. The NSL

units intercept all telephone lines into the building’s suites and communicate

directly to the resident phone using the TX3 Nano.

Note: Non-configurable PBX systems are not supported. For more

information, contact technical support at Mircom.

1.4 Types of Calls

In all cases, the TX3 Nano can accept DTMF tones, which allow the resident to

open the door for the visitor, or to disconnect the call without opening the door.

1.4.1 PSTN Call

The TX3 Nano makes calls over the PSTN (Public Switched Telephone

Network), as shown in Figure 2.

Figure 2. PSTN call

Introduction

TX3 Nano Configuration Manual 9

1.4.2 Cellular Call

The cellular-enabled models of the TX3 Nano (for example TX3-NANO-S4-

CA) make calls over the cellular network. In this situation, the TX3 Nano acts

like a cell phone.

Figure 3. Cellular call

1.4.3 VOIP Call

A VOIP call allows both audio and video calls from the TX3 Nano to a SIP

(Session Initiation Protocol) client. Both the called party and the TX3 Nano must

be registered with a SIP server. Video is one direction only: from the TX3 Nano

to the SIP client.

There are two options for managing SIP services:

• Remote SIP server provided by a third party (for example OnSIP)

• Local SIP server (for example Kamailio)

10 TX3 Nano Configuration Manual

Introduction

Figure 4. VOIP Call with OnSIP and MiEntry

Figure 5. VOIP Call with local Kamailio server

TX3 Nano

Wireless router

OnSIP Server

Cell phone with

MiEntry app

Internet

Cell phone with

MiEntry app

X3 Nano

Wireless router

Cell phone with

MiEntry app

Local Kamailio

server

TX3 InSuite

Autres manuels pour TX3 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Mircom Système d'interphone

Mircom

Mircom TX3 Series Manuel utilisateur

Mircom

Mircom RA-1000 Series Manuel utilisateur

Mircom

Mircom RAM-216 Manuel utilisateur

Mircom

Mircom TX3-TOUCH-UPS-KIT Manuel utilisateur

Mircom

Mircom Autodialer ADC Series Manuel utilisateur

Mircom

Mircom CA-1010 Manuel utilisateur

Mircom

Mircom CA-1010 Manuel utilisateur

Mircom

Mircom TX3 Series Manuel utilisateur

Mircom

Mircom TX3 Series Manuel utilisateur

Mircom

Mircom TX3 Series Manuel utilisateur

Mircom

Mircom TX3-TOUCH-F15-B Manuel utilisateur

Mircom

Mircom TAS-2000 Series Manuel utilisateur

Mircom

Mircom TX3 Series Manuel utilisateur

Mircom

Mircom TX3 Series Manuel utilisateur

Mircom

Mircom TX3-TOUCH-F15-B Manuel utilisateur

Mircom

Mircom TX3 Series Manuel du propriétaire

Mircom

Mircom TX3 Series Feuille d'instructions

Mircom

Mircom ADC Series Mode d'emploi

Mircom

Mircom DA-100 Manuel utilisateur

Mircom

Mircom TX3-TOUCH-S15B-WR Manuel utilisateur

Mircom

Mircom 9500 Series Mode d'emploi

Mircom

Mircom TX3 Series Manuel utilisateur

Mircom

Mircom EP-1000 Manuel utilisateur

Mircom

Mircom TX3 Nano Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur