4
IMPORTANT SAFETY INFORMATION
Warning!
Follow all warnings, cautions and instructions contained in this guide, and
on or inside the appliance.
1. THIS APPLIANCE MUST BE EARTHED. ENSURE SUPPLEMENTARY
BONDING COMPLIES WITH THE “REQUIREMENTS FOR ELECTRICAL
INSTALLATIONS”.
In accordance with the current edition of ’The Plugs and Sockets etc. (Safety)
Regulations’ in force at the time of installation, the Mira Digital Mixer Valve is
system. A means for electrical isolation of the appliance shall be provided in the
2. Products manufactured by us are safe and risk-free, provided that they are
installed, used and maintained in good working order, in accordance with our
instructions and recommendations.
3. Isolate the electrical and water supplies before connecting to the appliance.
4. This appliance must be provided with means for disconnection that is incorporated
Refer to the wiring diagram before making any electrical connections.
5. Mains connections are exposed when the cover of the Digital Mixer Valve is
removed.
6. Make sure that any pipework that could become frozen is properly insulated.
7. In accordance with BS7671 a 30mA Residual Current Device (RCD) MUST
be included in the electrical circuit. This may be part of the consumer unit or a
separate unit.
8. All pipework must be checked for leaks before the product installation is
completed. The product should be pressurised and both inlet & outlet connections
inspected.
9. Having completed the installation, make sure that the user is familiar with the
operation of the appliance.
10. Make sure that this guide is left with the user.
11. DO NOT commission this appliance if water leaks from the unit.
13. Ensure all electrical connections are tight, to prevent overheating.
14. This product is not suitable for areas with high humidity (i.e steam rooms).
Please consult your installer.
Installation must be carried out in accordance with these instructions and by
