MIOTTA Home8 TotalShield M1201CUS Manuel utilisateur
Broadband internet connection, iOS or Android phone and home router required.
What’s inside:
TotalShield
Quickstart Guide
Model No. M1201CUS
1x Power
Adapter
1x Ethernet
Cable
1x Gateway
1x External Siren
1x Infrared
Motion Sensor
1x Twist HD
Camera
2x Arm/Disarm/
Panic Remotes
8
7
4
6x Mounting
Accessories
1 xDouble-Sided
Tape
1x Battery
(CR123A)
1x Double-Sided
Tape
1x Fire/CO Siren
Extender Sensor
5
1x Water Leak
Sensor
6
1x Power
Adapter
1x Power
Cable
12
6x Door + Window
Sensors
3
6 xBatteries
(CR123A)
12x Double-Sided
Tapes
1x Battery
(CR123A)
2x Double-Sided
Tapes
Mounting
Accessories
1x Battery
(CR123A)
Mounting
Accessories
V1.0
Step 3: Activate your system
English
English
2. Download the Home8 app
from the App Store or
Google Play Store.
2. Find the QR Code Sticker
on the Gateway and follow
the instructions on your
app.
Step 4: Place your devices
Door + Window Sensor
Use screws or Double-sided
tape to attach sensor.
Maximum distance between
two part is 1/4 inch .
Twist HD Camera
Connect the included power
adapter to the 2Camera.
Check the Light indicators,
The left light should be Solid
blue as power on. The right
light should be blink blue if
camera connect to Gateway
successfully.
External Siren
Plug the power line.
Place the siren.
1/4"
3. Follow the on-screen
instructions and set up
your account.
1
2
3
7
Step 1: Connect to Network
Unpack all of your hardware within 20 feet of your
home router for quick set up.
Step 2: Set up your smartphone
1. Go to Wi-Fi settings and
connect your smartphone
to Wi-Fi.
1. Connect the 1Gateway
to your router with the
included Ethernet
cable, then power on.
2. Install batteries and plug
in power adapters to
devices and sensors.
3. When you see the "System
is ready!" message.
Congratulations, your system
setup has completed!
1. Select Menu Icon on
top left on the App and tap
"Add Device" to activate
system.
7
5 6
3 4 8
English
English
Step 4: Place your devices
English
English
Use your Keychain Remote to
Arm/Disarm/Panic
Press the Arm/Disarm button.
The LED light should blink.
You will receive a push
notification on your phone
saying "System is armed/
disarmed by keychain remote"
if remote is within range.
Hold either button for 5
seconds as trigger Panic
button.
Place Your Fire/CO Siren
Extender Sensor
Test the device by pressing
and holding the TEST
button for 3 seconds. The
LED light should blink.
If you receive a push
notification saying "sonic
detected", it's within
range. Mount your device
within 1 foot or 30cm to
your existing Smoke/CO
detector.
1. On the home screen,
tap the Subscribe Now.
2. Provide contact and
payment method
information.
3. Review order information
and click Place Order.
Step 5: Enable your service
Once your subscription
is successful, the system
status will change to
" Practice Mode " for one
day.
With our Professional
Monitoring Service, after
the1-Day Practice Period, the
system status will change to
" In Service ", you'll receive
24/7 monitoring for your
system.
Troubleshooting & FAQ
Please visit https://www.home8alarm.com/faq/
or call 1-844-800-6482 for more information.
1-Day Practice Period
Place your Water Leak
Sensor
Ensure the water contact
prongs are placed on the
surface to detect water
leakage. Secure the water
contact prongs to the
surface. Apply the double-
sided tape on the sensor
and mount it safely away
from the water contact
prongs.
6
8
5
Infrared Motion Sensor
Place the device in an area
with no direct sunslight.
The motion sensor has a 3
minutes cooldown period.
120°
4
Autres manuels MIOTTA Système de sécurité
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur