Minka-Aire Delano Manuel utilisateur

INSTRUCTION MANUAL WARRANTY CERTIFICATE

DELANO

U.S. Patents: D453,218; D457,235; D458,363

This product is protected by United States Federal and/or State Law, including Patent, Trademark and/or Copyright laws.

Manual design and all elements of manual design are protected by U.S. Federal and/or State Law, including Patent, Trademark and/or Copyright laws.

The Minka-Aire® warranty is for one (1) year from the date of purchase from an authorized Minka-Aire® dealer.

This warranty is only valid to the original purchaser or user against all defects in material and workmanship (light bulbs

excluded) for one (1) full year. Additionally, Minka-Aire® warrants the motor only for the lifetime of the Minka Aire ceiling

fan (excluding wall controls and electrical components), to the original purchaser or user.

* The warranty is voided with the use of any non- Minka-Aire®electrical devices, E.g., wall controls or electrical dimmer switches, etc…

* The warranty is void once the original purchaser or user ceases to own the fan or the fan is moved from its original point of installation.

* The warranty is void with the use of any hanger bracket (non-Minka Aire or non-fan specific) other than the hanger bracket supplied & installed

with this specific fan.

Date Purchased Store Purchased Model Number Serial Number

F701

Warranty Service Information

To obtain warranty service during the warranty period, the purchaser should return the fan with the sales receipt to the original place of

purchase. The authorized Minka-Aire® dealer, at its sole discretion, will either repair or replace the fan after verifying the legitimacy of the warranty

claim. Replacement is subject to availability of the same model. If the model is unavailable it will be replaced by one of equal value. This is a

limited warranty; the original purchaser or user is responsible for the cost of removal and reinstallation of repaired or replacement product.

To obtain the name of the Minka-Aire® authorized dealer nearest you call the Minka-Aire® customer care department at 1-800-307-3267, or

contact Minka-Aire® through www.minkagroup.net and write to: “Ask Mr. Minka” to answer any questions or if you require assistance.

CONTENTS

SAFETY RULES....................................................................................

PACKAGE CONTENTS.....................................................................

INSTALLING THE FAN.....................................................................

ASSEMBLING THE FAN..................................................................

HANGING THE FAN.........................................................................

ELECTRICAL CONNECTIONS.......................................................

INSTALLING THE WALL TRANSMITTER.................................

FINISHING THE INSTALLATION.......................................................

BLADE INSTALLATION..........................................................................

INSTALLING THE LIGHT BULBS & GLASS SHADE...................

OPERATING YOUR WALL TRANSMITTER...................................

CARE OF YOUR FAN..............................................................................

TROUBLESHOOTING............................................................................

SPECIFICATIONS.....................................................................................

LISTED

E75795

1151 W. Bradford Court, Corona, CA 92882 For Customer Assistance Call: 1-800-307-3267

SAFETY RULES

1. Before you begin installing the fan, shut power off at the circuit breaker of the fuse box.

2. Be cautious! Read all instructions and safety information before installing your new fan. Review accompanying assembly diagrams.

3. Make sure that all electrical connections comply with local codes, ordinances, or National Electrical Codes. Hire a qualified electrician or consult a

do-it-yourself wiring handbook if you are unfamiliar with installing electrical wiring.

4. Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from the

floor and 18 inches from the tip of the blades to the wall.

5. If you are mounting the fan to a ceiling fan outlet box, use a U.L. Listed metal octagonal outlet box marked "Acceptable for Fan Support". Secure

the box directly to the building structure. The outlet box and its support must be able to support the moving weight of the fan (at least 50 pounds)

Do not use a plastic box.

6. Caution:

Caution:

To reduce the risk of injury use only the screws provided with the outlet box in conjunction with the lock washers provided with the fan.

7. If you are mounting the fan to a joist, make sure it is able to support the moving weight of the fan (at least 50 pounds).

8. After you install the fan, make sure that all mounting components are secured to prevent the fan from falling.

9. Do not insert anything into the fan blades while the fan is operating.

10. Turn the fan off and wait for the blades to stop completely before changing the fan direction.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR OTHER PERSONAL INJURY, MOUNT FAN ONLY TO A U.L. LISTED OUTLET BOX OR SUPPORTING SYSTEM MARKED

ACCEPTABLE FOR FAN SUPPORT AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX IN CONJUCTION WITH THE LOCK WASHERS PROVIDED WITH THE

FAN. MOST OUTLET BOXES COMMONLY USED FOR FAN SUPPORT OF LIGHTING FIXTURES ARE NOT ACCEPTABLE FOR FAN SUPPORT AND NEED TO BE REPLACED.

CONSULT A QUALIFIED ELECTRICIAN IF IN DOUBT.

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE HOLDERS WHILE INSTALLING, BALANCING THE BLADES OR CLEANING THE FAN. DO NOT

INSERT FOREIGN OBJECTS BETWEEN ROTATING FAN BLADES.

TO REDUCE THE RISK OF FIRE OR ELECTRONIC SHOCK, THIS FAN ONLY CAN USE MR36T SOLID-STATE SPEED CONTROL WITH TR111A WALL CONTROL ONLY.

NOTE: The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may

occur. It must be understood that common sense, caution and care are factors which can not be built into this product. These factors must be

supplied by the person (s) installing, caring for and operating the unit.

NOTE: READ AND SAVE ALL INSTRUCTIONS!

ATTENTION:

The Energy Policy Act of 2005 requires this fan to be equipped with a 190 watt limiting device. If lamping exceeds 190 watts, the

ceiling fan's light kit will shut off automatically.

1. Fan blades (5 )

2. Hanger bracket

3. Canopy

4. Canopy cover

5a. Standard downrod assembly

5b. Minimum-length downrod (for close

to ceiling mounting only)

6. Coupling cover

7. Upper housing

8. Bulb holder assembly

9. Fan motor/housing assembly

10. Blade holders (5)

11. 50W Halogen bulb (2)

12. Glass shade

13. Light kit stem

14a.Wall Transmitter Incl. 2 Mounting

Screws and 3 Wire Nuts

14b.Wall Plate w/2 Mounting screws

15. Receiver with 7 wire nuts

16, Extra Wall Plate w/2 Mounting screws

17. Balancing kit

A. Mounting Hardware:

#10 x 1.5" Wood Screws (2 PCs.)

#8 x 3/4" Machine screws (2 PCs.)

Lock washers (2 PCs.)

4mm Star washers (2 PCs.)

Wire nuts (3 PCs. )

Washers (2 PCs.)

B. Blade Attachment Hardware:

3/16" x 7.5 mm Screws (16 PCs.)

Fibber Washers (16 PCs.)

C. Bracket Holder Hardware:

3/16" x 3/4" Screws with lock washers (11 PCs.)

PACKAGE CONTENTS

14a

14b

Unpack your fan and check the contents.

You should have the following items:

Tools Required: Phillips screw driver; slotted screw driver; step-ladder; wire cutters; electrical tape.

INSTALLING THE FAN

MOUNTING OPTIONS

If there isn't an existing mounting box, then read the following instructions. Disconnect the

power by removing fuses or turning off circuit breakers.

Secure the outlet box directly to the building structure. Use appropriate fasteners and building

materials. The outlet box and its support must be able to fully support the moving weight of

the fan (at least 50 lbs.). Use a UL Listed metal outlet box. Do not use a plastic outlet box.

Figure 1, 2 and 3 are examples of different ways to mount the outlet box.

Note:You may need a longer downrod to maintain proper blade clearance when installing on a

steep, sloped ceiling. Longer downrods are available from your Minka-Aire dealer.

To hang your fan where there is an existing fixture but no ceiling joist, you may need to install

a hanger bar as shown in Fig. 4 (available at your Minka-Aire dealer).

FIG. 1

FIG. 3

FIG. 2

FIG. 4

CROSS BRACE

CEILING

JOIST

CEILING

JOIST

CEILING

JOIST

OUTLET BOX

PARALLEL WOOD BRACE

(Min. 2" Thick)

OUTLET

BOX

OUTLET BOX

CEILING JOIST OR

CROSS BRACE

ANGLED CEILING

MAXIMUM 29 ANGLE PROVIDE

STRONG

SUPPORT

RECESSED

OUTLET BOX

HANGER

OPENING

MUST BE

FACING

UPSIDE

HANGER BAR

(OPTIONAL)

HANGER

BRACKET

Your fan is packed with the motor and Upper Housing unassembled, proceed

the following steps for fan assembly:

Step1. Remove the two screws and rubber washers from the top of the motor

center band. Place the upper housing over the motor center band and secure it

with the two screws and rubber washers previously removed. (Fig.5)

Step2. Engage the white wire connectors from the motor and the bulb holder

assembly make sure the connection is secured Follow the same procedure for the

orange and black wire connectors.(Fig.6)

Step3. Loosen the three screws (do not remove) from the motor coupling. (Fig. 7)

Step4. Place the bulb holder assembly key holes over the 3 screws previously

loosened from the motor coupling, turn the bulb holder assembly until it locks in

place at the narrow section of the key holes. Secure by tightening the three

screws previously loosened. (Fig.7)

ASSEMBLING THE FAN

Fig. 5

Top motor

Motor

center

band

Screw

Upper housing

Fig. 6

Wire

connectors Bulb holder

assembly

Motor

Rubber

washers

Screws

Fig. 7

Motor

coupling

Bulb holder

assembly

Table des matières

Autres manuels Minka-Aire Ventilateur

Minka-Aire

Minka-Aire Facets Manuel utilisateur

Minka-Aire

Minka-Aire SUPRA 44 Manuel utilisateur

Minka-Aire

Minka-Aire Aviation F853 Manuel utilisateur

Minka-Aire

Minka-Aire Taos F661 Manuel utilisateur

Minka-Aire

Minka-Aire Gyrette F302 Mode d’emploi

Minka-Aire

Minka-Aire GYRO WET Mode d’emploi

Minka-Aire

Minka-Aire ARTEMIS XL5 Manuel utilisateur

Minka-Aire

Minka-Aire ARTEMIS Manuel utilisateur

Minka-Aire

Minka-Aire uchiwa Mode d’emploi

Minka-Aire

Minka-Aire Mesa F565 Manuel utilisateur

Minka-Aire

Minka-Aire Como F603 Manuel utilisateur

Minka-Aire

Minka-Aire Bolo Mode d’emploi

Minka-Aire

Minka-Aire F599 Manuel utilisateur

Minka-Aire

Minka-Aire ALUMA Mode d’emploi

Minka-Aire

Minka-Aire contactor F547 Manuel utilisateur

Minka-Aire

Minka-Aire CONCEPT I WET Mode d’emploi

Minka-Aire

Minka-Aire contactor F547 Manuel utilisateur

Minka-Aire

Minka-Aire F702 Manuel utilisateur

Minka-Aire

Minka-Aire Pancake F738 Manuel utilisateur

Minka-Aire

Minka-Aire F688 Manuel utilisateur

Minka-Aire

Minka-Aire Flyte Manuel utilisateur

Minka-Aire

Minka-Aire F601 Acero Manuel utilisateur

Minka-Aire

Minka-Aire DELANO F701L-PW Mode d’emploi

Minka-Aire

Minka-Aire Wind Manuel utilisateur

Manuels Ventilateur populaires d'autres marques

ELTA FANS

ELTA FANS H03VV-F Manuel utilisateur

Hunter

Hunter 20714 Manuel d'instructions

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuel utilisateur

Hunter

Hunter Caraway Manuel d'instructions

Panasonic

Panasonic FV-15NLFS1 Manuel utilisateur

Kompernass

Kompernass KH 1150 Manuel utilisateur

VES

VES FALA100/12V/TR Manuel utilisateur

Vertiv

Vertiv Liebert DCD Manuel utilisateur

Westinghouse

Westinghouse GFP Series Manuel utilisateur

Venmar

Venmar KUBIX HRV PLUS Series Manuel utilisateur

Maico

Maico ECR 31 Manuel utilisateur

Sonnenkonig

Sonnenkonig Dinky Manuel utilisateur

S&P

S&P ECOWATT HXBR Manuel utilisateur

Wider

Wider IMP03369BH Manuel utilisateur

Panasonic

Panasonic F-60DHN Manuel utilisateur

Hinkley

Hinkley HIGHLAND Manuel utilisateur

Broan

Broan 766BN Manuel utilisateur

Premium

Premium PFS16022 Instructions de montage