This is your main settings window to configure all aspects of the camera itself. After you change any
setting, be sure to click the “Apply” button in the lower right corner of the settings window. The options
you have on the left are the following:
Device Information –Basic device information such as the device’s name and time zone.
User’s Config – Here you can add user names and passwords or change user name and passwords
to allow access to the camera. It is recommended that you do not use any easy to guess or default
passwords such as “admin” or “password”
Net Config –These are the network settings. These should have already been set correctly
previously using the IPSearch program. If you wish to use a DDNS service, you would input your
credentials for that service here. To find out more about DDNS services please visit
http://www.ehow.com/how_7718755_set-up-ddns.html
Wifi Config –These settings should have been set up previously using the IPSearch program. If you
wish to change any settings such as the network or the password you can do so here.
oThe “GetList” button will show you a list of stored Wifi networks and their information.
oThe “Search” button will search your area for available Wifi networks that you can connect
to. You may need to manually set the SSID if it contains spaces. See IPSearch section above.
Time Config –Configure the time of the clock (applies to pictures and video, not the clock face
itself).
Video Config –This is where you can configure the quality and color settings of your video. Your
“Pri.Stream” is the video that is stored to the sd card. The “Sec.Stream” is the video that is
streamed to the DVR program and over networks. The defaults for these options should be fine
for most situations but can be configured based on specific network and video needs.
Audio Config –This is where you can enable or disable audio, set the sound levels for the Alarm
recording, and choose Audio Alarm settings.
Hide Area Config –Allows you to manually hide an area of the video in all recordings and images.
Motion Detection Config –This section allows you to configure the sensitivity of the motion
detection as well as Alarm actions that are taken when motion is detected. You can also choose to
only have motion detection look at a certain area and ignore other parts of the image that may
