Mindeo MD6000 Manuel utilisateur

MD6000 image barcode scanner quick guide

Note

Parts of the scanner

①

LED

②

Beeper

③

Scan window

④

Trigger

⑤

Release-hole of the cable

⑥

Cable interface port

Installing the cable

1. Switch off the host;

2. Refer to the below pictures, connect the host with the scanner based on different cables;

3. Ensure that all connections are secure.

4. Switch on the host system. If the installation is successful, the beeper will beep and LED

will light.

USB cable RS232 cable

Removing the cable

1. Find the release-hole.

2. Insert a thin wire into the hole and pull out the cable gently.

Reading techniques

1. Press and hold the trigger, the scanner projects a green LED square which allows

positioning the barcode within its field of view, and turns on the white LED for illumination.

2. When reading a barcode, the green LED square will be smaller when the scanner is closer

to the barcode and larger when it is farther from the barcode. Please hold the scanner at

an appropriate distance from the barcode, and center the green LED square on the

barcode.

3. On a successful barcode reading, the scanner will beep once, and the green LED square

and white LED will be turned off. Then the scanner transmits barcode message to the host.

Return default parameters and version information

Default value initialization

Firmware version list

Note: If the host cannot receive data normally because the input speed of the scanner is too

fast, please scan the barcode below:



A standard packing includes a scanner, a USB cable and a CD (or a user manual).



Accessories include a stand, a RS232 cable, and a 5V adaptor.



Use a piece of dry and soft cloth when cleaning the scanner is in need.

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MD6000_QG_EN_V1.2.

Programming instruction and example

Two programming modes have been provided as bellows:

Single-scan setting

Scan the appropriate

Single-scan setting

Example: to set Flow control to be XON/XOFF.

Multiple-scan setting

Scan “Option bar code”

Scan “the 1st character of option”

Scan “the 2nd character of option”

Scan “END”

Example: to set Flow control to be XON/XOFF.

Quick setting to enable/disable Auto-detection

Note: The stand is an optional accessory.

Scan the barcode “EN-AutoDete” on the stand to enable Auto-detection.

Scan the barcode “DIS-AutoDete” on the stand to disable Auto-detection. Note: The

Scanning mode will switch to momentary.

DIS-AutoDete

EN-AutoDete

Assembling the stand

Note: The stand is an optional accessory.

1. See the figure above, tighten the screws.

2. Bend the neck to the desired position for scanning.

3. Screw mounting: Screw one #10 wood screw into each screw-mount-hole until the base

of the stand is secured.

4. Tape mounting: ①Peel the paper liner off one side of each piece of tape and place the

sticky surface over each of the three rectangular tape holders. ②Peel the paper liner

off the exposed sides of each piece of tape and press the stand on a flat surface until it

is secure.

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MD6000_QG_EN_V1.2.

Autres manuels pour MD6000

Autres manuels Mindeo Lecteur de codes-barres

Mindeo

Mindeo MS3590 Manuel utilisateur

Mindeo

Mindeo MP82 Series Manuel utilisateur

Mindeo

Mindeo CS2290 Manuel utilisateur

Mindeo

Mindeo FM100 Manuel utilisateur

Mindeo

Mindeo MD52 Series Manuel utilisateur

Mindeo

Mindeo MD22 Series Manuel utilisateur

Mindeo

Mindeo MD61 Series Manuel utilisateur

Mindeo

Mindeo CS2190 Manuel utilisateur

Mindeo

Mindeo MD6600 Manuel utilisateur

Mindeo

Mindeo MP168 Manuel utilisateur

Mindeo

Mindeo ES4200 Manuel utilisateur

Mindeo

Mindeo MP725 Manuel utilisateur

Mindeo

Mindeo CR40 Series Manuel utilisateur

Mindeo

Mindeo MD20 series Manuel utilisateur

Mindeo

Mindeo CS3290 Manuel utilisateur

Mindeo

Mindeo ES168 Manuel utilisateur

Mindeo

Mindeo MD6850 Manuel utilisateur

Mindeo

Mindeo MD20 series Manuel utilisateur

Mindeo

Mindeo MP83 Series Manuel utilisateur

Mindeo

Mindeo MP83xx Manuel utilisateur

Mindeo

Mindeo MP8608 Manuel utilisateur

Mindeo

Mindeo CS-I Series Manuel utilisateur

Mindeo

Mindeo MD22xx Manuel utilisateur

Mindeo

Mindeo MP8600 Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur