Miller Roughneck C-4015S Manuel utilisateur

OWNER’S MANUAL

2000 MILLER Electric Mfg. Co.

OMĆ200 386

May 2000

RoughneckEC-4015S Air-Cooled Gun

1. Specifications

Air-CooledGun For GMAW Welding

Note: Using mixed gases other than CO2reduces duty cycle ratings by 10-50%.

C-4015S Gun Feeds .045 To .068 in (1.2 To 1.7 mm) Wire

Duty Cycle Rating: 100%: 400 A With CO2Shielding Gas

Weight With 15 Ft (Heaviest) Power Cable: 10.3 lb (4.7 kg)

Ref. ST-800 797-C

2. Safety Precautions For GMAW Guns

A. Symbol Usage

Means Warning! Watch Out! There are possible hazards with this

procedure!The possible hazards are shown in the adjoining symbols.

This group of symbols means Warning! Watch Out! Possible ELECTRIC SHOCK and HOT PARTS hazards.

Consult symbols and related instructions below for necessary actions to avoid the hazards.

YMarks a special safety message.

.Means NOTE; not safety related.

B. GMAW Gun Hazards

WARNING

The symbols shown below are used throughout this manual to call attention to and identify possible

hazards. When you see the symbol, watch out, and follow the related instructions to avoid the hazard. The

safety information given below is only a summary of the more complete safety information found in wire

feeder and welding power source manuals. Read and follow all Safety Standards.

ELECTRIC SHOCK can kill.

1. Always wear dry insulating gloves.

2. Insulate yourself from work and ground.

3. Do not touch live electrode or electrical parts.

4. Repair or replace worn, damaged, or cracked gun

or cable insulation.

5. Turn off welding power source before changing

contact tip or gun parts.

6. Keep all covers and handle securely in place.

HOT SURFACES can burn skin.

1. Allow gun to cool before touching.

2. Do not touch hot metal.

3. Protect others from contact with hot metal.

FLYING PIECES OF METAL or DIRT can

injure eyes.

1. Wear safety glasses with side shields or face

shield.

WELDING WIRE can cause puncture

wounds.

1. Keep hands and body away from gun tip when

triggeris pressed.

OVERUSE can damage gun and void

warranty.

1. Followrated duty cycle.

2. Allow cooling period.

3. Reduce current or reduce duty cycle before

startingto weld again.

1. Read and follow these instructions and all safety

blocks carefully.

2. Have only trained and qualified persons install,

operate,or service this unit.

3. Call your distributor if you do not understand the

directions.

4. For WELDING SAFETY and EMF information,

read wire feeder and welding power source

manuals.

OM-200 386 Page 2

3. Gun Connection And Operation

Ref. ST-802 483-A / 802 626

1 Gun Securing Knob

2 Gun Block

3 Adapter

Loosen knob, insert adapter, and

tightenknob.

4 Gun Trigger Plug

5 Gun Trigger Receptacle

Insertplug into receptacle and tight-

en threaded collar.

6 Trigger Switch

Press switch to feed energized wire

and start gas flow.

OM-200 386 Page 3

4. Parts List

Ref. 802 630

Figure 4-1. Parts View

Description

Part

No.

Item

No.

Figure 4-1. Parts View

Quantity

1 200 282 NOZZLE 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 200 278 TIP, contact 1.2 mm wire 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2♦200 279 TIP, contact 1.4 mm wire 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2♦200 280 TIP, contact 1.6 mm wire 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2♦200 281 TIP, contact 1.7 mm wire 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 200 283 DIFFUSER, gas 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 198 856 INSULATOR, nozzle 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 198 858 LINER, 1.2 mm wire 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5♦198 859 LINER, 1.4/1.6/1.7 mm wire 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

♦OPTIONAL

Table des matières

Autres manuels Miller Système de soudage

Miller

Miller MigMatic 220 Manuel utilisateur

Miller

Miller Dimension Subarc 652 Manuel utilisateur

Miller

Miller AXCESS E 450 CE Manuel utilisateur

Miller

Miller RFCS-5 Manuel utilisateur

Miller

Miller SuitCase X-TREME 12VS Manuel utilisateur

Miller

Miller ADI 253 Manuel utilisateur

Miller

Miller S-74 MPa Plus Manuel utilisateur

Miller

Miller TRAVEL MAASTER SPT-1C Manuel utilisateur

Miller

Miller GOLDSTAR 302 Manuel utilisateur

Miller

Miller Big Blue 400 PX CE Manuel utilisateur

Miller

Miller Gold Seal GS-250 Manuel utilisateur

Miller

Miller Bobcat 260 Diesel Manuel utilisateur

Miller

Miller M-100 Manuel utilisateur

Miller

Miller Gold Star 300SS Manuel utilisateur

Miller

Miller Maxtron 450 Manuel utilisateur

Miller

Miller DIALARC 400 AC/DC Manuel utilisateur

Miller

Miller VCI-1 Manuel utilisateur

Miller

Miller CP-302 Manuel utilisateur

Miller

Miller Swingarc DS-74S/D Manuel utilisateur

Miller

Miller OM-262 659C Guide de l'utilisateur

Miller

Miller LMSW-52 Manuel utilisateur

Miller

Miller HF 5000 CE Manuel utilisateur

Miller

Miller SPECTRUM 750 Manuel utilisateur

Miller

Miller TRAILBLAZER 302 AIR PAK Manuel utilisateur

Manuels Système de soudage populaires d'autres marques

Berner

Berner PLASMACUT 54 Manuel utilisateur

Pro Spot

Pro Spot PR-155 Manuel utilisateur

Forney

Forney 210 Manuel utilisateur

Thermal Arc

Thermal Arc 400S Manuel utilisateur

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuel utilisateur

GYS

GYS PROTIG 201 AC/DC Manuel utilisateur

TAFA

TAFA 30*8B35 Manuel utilisateur

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuel utilisateur

ESAB

ESAB Buddy Arc 145 Manuel utilisateur

CIGWELD

CIGWELD 636804 Guide rapide

Red-D-Arc

Red-D-Arc DC-400 Manuel utilisateur

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuel utilisateur

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuel utilisateur

WIA

WIA Weldmatic 270 CP132-2 Manuel utilisateur

Sonics

Sonics H520T Manuel utilisateur

NewArc

NewArc RT2000 Guide de démarrage rapide

Hypertherm

Hypertherm powermax1000 Manuel utilisateur

Lincoln Electric

Lincoln Electric POWER WAVE I400 Manuel utilisateur