MILL Sense Manuel utilisateur
Developed in Norway
Mill International AS Sense
User Manual
Mill Sense is a smart indoor air quality monitor developed by Mill in
Norway. Connect the device to your WiFi network and get the status of
your indoor climae directly in the MillNorway app on your mobile phone.
Sense
Mill Sense measures:
Too high levels of humidity can cause mold growth which is harmful for your
health, as it can cause asthma and allergies. It is therefore crucial with good
ventilation when taking a shower, drying of clothes and cooking. The recom-
mended level of humidity: 30-60%. A humidifier / dehumidifier can be a
solution to achieve a recommended humidity level in the home.
• Max Accuracy: Relative humidity sensor ±2.0% RH
Humidity
TVOC
• Alcohols
• Aldehydes
• Ketones
• Organic Acids
• Amines
• Aliphatic and aromatic hydrocarbons
Temperature
A consistent temperature in all rooms are important for a healthy indoor
climate. It is not recommended to turn the heat completely off in rooms
you are not using for instance, as in combination with humidity this can
cause mould growing. Temperaure affects performance, comfort level
and cold or flu symptoms. Connect Mill Sense to Mill WiFi heaters for
more precise temperature control. *This way the temperarure will
automatically adjust to your daily routines. Recommended temperature:
18-25°C.
• Max Accuracy: Temperature sensor ± 0.15°C
The eCO2 measurement is calculated from the VOC measurement. The
calculation makes some assumptions about the percentage of VOCs that are
due to CO2 . If there are substantial concentrations of other VOCs present,
the eCO2 reading would be higher than the actual CO2 level. Moderate to
high levels of carbon dioxide can cause headaches and fatigue, and higher
concentrations can produce nausea, dizziness, and vomiting. Loss of
consciousness can occur at extremely high concentrations. Good ventilation
and regular ventilation are important to maintain a recommended eCO2 level.
Recommended eCO2 level: <1200 ppm.
eCO2
Total Volatile Organic Compounds are airborne chemicals
& toxins emitted from everyday items such as paint, furniture and clean-
ing products. They can be harmful at a high concentration, causing
irritations in eyes, nose and throath. Depending on the level and length of
exposure it can also cause more serious damage to liver and kidneys.
Recommended TVOC level: <220 ppb. An air purifier will be able to
ensure that the TVOC level is within the recommended level. Mill Sense
measures the following VOC’s.
*Mill Sense is not compatible with Mill WiFi generation 1 heaters.
Safety information and correct usage
Before your start
Make sure:
Your smart phone has a working internet connection
Mill Sense is intended for indoor use only
Avoid direct exposure to sunlight.
Avoid exposure to direct heat sources.
Place away from vents and windows.
Do not disassemble. If the device is not working as specified or you are in doubt,
contact your dealer or visit us at millnorway.com
Use a dry cloth to clean Mill Sense.
Disable any firewalls or VPN that might block the device from
communicating with our server
Bluetooth is enabled
Product specifications
!
1
2
5
3
6
4
7
1. Indicator light
2. ON/OFF button
3. Backside with magnet
4. Charging port
5. Air vent
6. Wall-bracket with magnet
7. Charging cable USB type C
Please be aware that when the device
is charging, the app will not show any sensor
measurements. While the device is charging the
sensor measurements will be affected by the heat
generated from charging, and will therefore not be
accurate. Once the device is fully charged, the sensor
measurements will reappear in the app, and the
charging cable can stay connected if you prefer
*
!
Get started
1!
Follow in-app instructions
to connect the device*
2
Download the MillNorway App and create
an account
Sensors need 72 hours for full
calibration and accuracy
*
Avoid exposure to direct heat sources.
Place away from vents and windows.
Place the device on a flat surface or attach it
to the wall using the provided wall-bracket
with double sided tape
3
Avoid direct exposure to sunlight.
Press the button on the Mill Sense
to understand your air quality levels:
!
Cold
Good
It is cold in the room, temperature is below 18°C.
Indoor air quality is good and the sensor values are within
recommended level.
Warning Indoor air quality is approaching poor/moderate levels. Take
simple steps such as opening windows to bring fresh air
inside.
Danger One or more of the sensor values are above the recommended
level. Actions should be taken to either increase ventilation,
dehumidifying or humidifying, depending on what levels needs
to be addressed.
Automatically calibrate/control your heaters using the Mill Sense
accurate temperature to give you a more precise indoor tempera-
ture.
Integrations
!
Fully Customizable
!
Mill WiFi
heaters:
Open API: Mill Sense sensor data is available through the open RES API.
Mill Sense can be added to your Tibber app so that you can view
your sensor data. Tibber is a digital energy company that
ensures full price transparency and an app to control your total
power consumption.
Tibber:
Customize sensor trigger ranges when pressing the button
(using the MillNorway app)
Change how often Mill Sense uploads new sensor data
(using the MillNorway app)
Troubleshooting
?
Q: How do I reset
the device?
A: Hold and press the button for 3 seconds, this will reset the connec-
tion and put device back to factory settings. This will also delete the
device from the cloud and from the user’s account. Device will then
go to deep sleep.
Q: Device is not
showing accurate
temperature or
humidity?
A: Make sure device is not near a heat/humidity source, Mill Sense
temperature og humidity sensors are pre calibrated.
1. Max transmitting power: <20 dBm
2. Frequency range: 2.4~2.5 GHz
3. Operational temperature: -5c to +50c
4. Storage temperature range: -10 to +125°C
Mill International AS shall not be liable for damages related to failure or loss of
data arising from incorrect operations and handling of the device.
Limited liability
millnorway.com/privacy-millnorway-app
For other languages or additional questions go to millnorway.zendesk.com
The Bluetooth word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Mill International AS is under license.
Terms & conditions
Copyright Mill International AS
Specifications
We are here to help!
Do you have any questions, issues or
want to give us feedback?
The warranty is valid for 2 years. The device will be repaired or replaced during this time
should any malfunction occur. The warranty applies if the device is used according to these
instructions and the customer can present a purchase receipt. If the device malfunctions in
any way, please contact the store where it was purchased or the importer.
If you want to contribute to a good and efficient recycling process, you may separate the
battery from the product and dispose it at the dedicated container for lithium batteries at
the environment station. Please follow the instructions below to remove the battery from
the device:
Mill International AS
Grini Næringspark 10
1361 Østerås
Norway
+47 22 13 32 00
Warranty
The symbol indicates that this product is not to be disposed of together with household
waste. This product must be delivered to a recycling service or container for electrical
appliances and electronic equipment. This is done to avoid health risks and prevent harm to
the environment. Local businesses (or the environmental station in your neighborhood) are
required by law to accept and recycle such products, as a means of environmentally sound
disposal.
Waste disposal
Efficient recycling process
1. Use a straight screw driver
to disassemble the front shell
2. Use a cross screw driver to
disassemble four screws
3. Remove the PCB by hand
4. Remove the battery and
dispose the battery
Autres manuels pour Sense
1
Table des matières
Autres manuels MILL Accessoires
