mikroElektronika mikroProg Manuel utilisateur
mikroProg
mikroProg™ is a fast USB programmer with mikroICD™
hardware In-Circuit Debugger support. Smart engineering
allows mikroProg to support PIC10®, PIC12®, PIC16®, PIC18®,
dsPIC30/33®, PIC24® and PIC32® devices
in a single programmer!
for PIC®, dsPIC®and PIC32®
™
Page 2
I want to express my thanks to you for being interested in our products and for having
condence in MikroElektronika.
The primary aim of our company is to design and produce high quality electronic products
and to constantly improve the performance thereof in order to better suit your needs.
TO OUR VALUED CUSTOMERS
Nebojsa Matic
General Manager
The PIC®, dsPIC®, PIC24®, PIC32® and Windows® logos and product names are trademarks of Microchip Technology® and Microsoft® in the U.S.A. and other countries.
Page 3
Introduction to mikroProg™ 4
Key features 5
1. Driver installation 6
step 1 – Start installation 7
step 2 – Accept EULA 7
step 3 – Installing the drivers 8
step 4 – Finish installation 8
2. Connecting to a PC 9
3. mikroProg Suite™ for PIC® software 10
4. Powering device via mikroProg™ 11
5. Connecting with a target device 12
6. IDC10 Pinout 13
7. Connection examples 14
Using 1x5 male headers 14
Using 2x5 male headers 15
8. Multiplexer 16
Multiplexer in idle mode 18
Multiplexer in programming/debugging mode 19
10. Examples of connection schematics 20
Table of Contents
Page 4
mikroProg™ for PIC®, dsPIC® and PIC32® represents fast and reliable programmer with ICD support. Specially designed rmware
allows programming of all Microchip®microcontrollers: PIC®, dsPIC®, PIC24® and PIC32®. And there’s no need for rmware change each
time you select a new microcontroller architecture because mikroProg™ rmware takes care of all supported architectures. Supporting
new microcontrollers is easy. Just by downloading the latest version of mikroProg Suite™ for PIC® your programmer is ready to
program new devices.
Introduction to mikroProg™
Page 5
Key features
- In-Circuit Debugging (ICD).
- One rmware for PIC®, dsPIC®, PIC24®
and PIC32® microcontroller families
- New microcontrollers support via
latest version of mikroProg™ Suite
for PIC® software
- Can provide power supply for target
device
01
02
03
04
05
06
Flat cable
USB MINIB connector
DATA transfer indication LED
ACTIVE indication LED
LINK indication LED
POWER indication LED
06
05
04
03
01
02
Page 6
1. Driver installation
mikroProg™ requires drivers in order to work. Drivers are located on the link bellow:
In the opened folder you should be
able to locate the driver setup le.
Double click on setup le to begin
installation of the programmer
drivers.
When you locate the drivers, please extract les from the ZIP archive. Folder with extracted les contains folders with drivers for
dierent operating systems. Depending on which operating system you use, choose adequate folder and open it.
http://www.mikroe.com/downloads/get/1202/mikroprog_for_pic_drivers_v200.zip
Page 7
step 2 – Accept EULAstep 1 – Start installation
01 In welcome screen click on Next> button 01
02
In order to proceed select: I accept the this EULA
(End User License Agreement)
Click Next> button
01
01 02
Page 8
step 3 – Installing the drivers step 4 – Finish installation
01 Drivers are installed automatically 01 Click on Finish button to end installation process
01
01
Page 9
2. Connecting to a PC
After driver installation is complete, you can now connect the programmer with your PC using
USB cable provided with the package. Green POWER LED should turn ON, indicating the presence
of power supply. Amber-colored LINK LED will turn ON when link between mikroProg™and PC is
established. Link can be established only when correct drivers are installed on your PC.
mikroProg Suite™ for PIC® software is
intended for programming PIC®, dsPIC®,
PIC24® and PIC32® microcontrollers from
Microchip®. The graphic interface of this
program is clear and easy-to-use, which
makes the use of this program faster. The
program’s main window includes basic
options forprogrammingmicrocontrollers.In
addition, there are advanced programming
options that enable experienced users to
set conguration bits on their own. The
program includes views providing basic
information about the selected MCU,
voltage monitoring, etc.
3. mikroProg Suite™for PIC®software
Page 10
Autres manuels pour mikroProg
7
Table des matières
Autres manuels mikroElektronika Accessoires informatiques
mikroElektronika
mikroElektronika mikroProg Manuel utilisateur
mikroElektronika
mikroElektronika microSD Card Manuel utilisateur
mikroElektronika
mikroElektronika USB UART Manuel utilisateur
mikroElektronika
mikroElektronika Audio Codec Proto Manuel utilisateur
mikroElektronika
mikroElektronika mikroProg Manuel utilisateur
