1.Keep the door gasket clean, remove it from the door and wash it. Dr
and seal it as before. Putting some talcum powder on the magnetic
surface would prolong its service life.
2.Light replacement:remove the top cover, take out the light, replace
with a new light, then mount it again.. The power of light is 6W,the
Voltage is AC220V/50Hz or AC110V/60Hz, Model&: T4
3.If there is heav frost on the evaporator after long usage, take out the
stuff inside the case, disconnect the power, the frost will melt auto-
maticall , clean up the water and connect the power again.
4.Use a soft cloth and dip some water or soap (Non-caustic, neutral de-
tergent is also available) to clean the unit. Dr the unit after cleaning
to avoid rust.
5.Do not use organic liquid, boiled water, washing powder or acid stuff
to clean the unit. Rinsing the case b water is not allowed&; don’t use
hard brush, steel brush to clean the case.
6.If the unit will not be used for a long time, disconnect the power,
clean it b following the above steps, wipe off the water inside the
case with a soft cloth.
6#$
1.The unit is not suitable for storage of blood, pharmaceutical products
and biological products.
2.Do not place heav articles on the top of the unit.
3.In case of trouble, please ask professional person for service, do not
dismantle the unit without prior authorit to avoid hazard.
#)2!$#!$