www.roadwidener.com
2
Model SP-8 &10
1. IntroduCtIon And WArrAnty
1.1 IntroduCtIon
Congratulations on your purchase of the Midland
Machinery SP machine. This SP machine has
been designed and manufactured to the strictest
specications. It is our utmost desire that you achieve
success and are rewarded years of service from your
equipment purchase.
Carefully examine your machine upon receipt. Report
any damage immediately to the freight carrier and
register any claim. Should any material or manufacturing
defects be discovered, report your ndings to our
service department along with the model, serial number
and date of purchase. We want to know that you are
satised with the machine. As always, we welcome
input on how our products can be improved to serve
you better.
Read and understand this manual before using your
machine and follow all of the safety instructions. Keep
this manual with your machine at all times.
Some components may have separate operation and
maintenance manuals. Where this manual indicates
that you should read another manual, and you do
not have that manual, contact Midland Machinery for
assistance.
This manual explains the operation and routine
maintenance of the SP machine. It does not instruct
you how to transport, travel and/or operate on specic
roadways or terrain.
Information furnished in this manual does not include
all of the details of design, production, or variations
of the equipment. It does not cover all the possible
contingencies, which may arise during operation,
setup, or maintenance. Should special problems
arise, or further information be desired, please contact
Midland Machinery. This manual is provided to the SP
owner to assist in the safe operation and maintenance
of the equipment.
The text contained in this manual is for current
production models. Some instructions and maintenance
procedures may not apply to your specic unit.
Equipment modications from original design and
specications are strictly prohibited. Modications may
compromise safe operation of the machine, subjecting
users to serious injury or death and may void any
remaining warranty.
Midland Machinery reserves the right to change,
improve, modify or expand features of this equipment
at any time. Specications, models, or equipment are
subject to change without notice, and without incurring
any obligations to change, improve or expand features
of previously delivered equipment. Because of
variations in optional equipment and continued design
improvement, certain information contained within this
manual may not apply.
This Operator’s Manual does not replace, nor does its
use release the operator from observing all safety or
operating limitations as well as any applicable federal,
state, provincial or local regulations.
1.2 serIAl numBer
The serial number plate (A) is located on left rear
corner of the machine.
