Midland FLM60H Manuel utilisateur
www.midlandpower.co.uk
FLM60H User Manual
MIDLAND POWER
DISTRIBUTION LIMITED
quality service support
- 3 -
1. USE OF THE MANUAL............................................................................pag. 4
2. NOTICE ON THE MACHINE..................................................................pag. 5
3. TECHNICAL DATA...................................................................................pag. 8
4. LIFTING AND TRANSPORTATION...........................................................pag. 9
5. MAIN PARTS OF THE MACHINE..........................................................pag. 10
6. CONTROLS AND ADJUSTMENTS.......................................................pag. 12
7. ASSEMBLY INSTRUCTIONS FOR THE HANDLEBARS AND
FRONT SUPPORT WITH WHEELS......................................................pag. 14
8. SAFETY INFORMATION
A) GENERAL INSTRUCITONS..............................................................pag. 15
B) TRAINING..........................................................................................pag. 15
C) PREPARATION.................................................................................pag. 15
D) WORKING USE.................................................................................pag. 16
E) AFTER WORK...................................................................................pag. 17
9. TRANSPORTATION OF THE MACHINE.................................................pag. 18
10. SAFETY SYSTEMS AND GUARDS.........................................................pag. 19
11. OPERATIONS TO BE CARRIED OUT BEFORE SWITCHING ON........pag. 19
12. STARTING AND DRIVING THE FLAIL MOWER..................................pag. 20
13. CUTTING TIPS......................................................................................pag. 22
14. CHECKS
A) TYRE PRESSURE............................................................................pag. 22
B) CABLE CONTROL ADJUSTMENT....................................................pag. 23
C) BRAKES ADJUSTMENT...................................................................pag. 25
D) BELT REPLACEMENT AND ADJUSTMENT.....................................pag. 26
E) CHECKING AND REPLACING THE FLAILS......................................pag. 29
F) SHARPENING THE FLAILS.................................................................pag. 30
G) CHECKING AND REPLACING THE TRANSMISSION OIL...................pag. 31
15. MAINTENANCE AND STORAGE..........................................................pag. 32
16. CLEANING THE MACHINE....................................................................pag. 33
17. SEASONAL LONG-TERM STORAGE PERIODS..................................pag. 33
18. DECOMMISSIONING AND SCRAPPING................................................pag. 34
19. TECHNICAL ASSISTANCE......................................................................pag. 34
20. WARRANTY..............................................................................................pag. 34
21. CE MARKING........................................................................................pag. 35
22. TROUBLESHOOTING............................................................................pag. 36
Enclosure 1. NOTES
Enclosure 2. Declaration of Conformity
- FLAIL MOWER MANUAL -
CONTENTS
- 4 -
Operating and Safety Instruction
FLAIL MOWER MOD. 610
FOREWORD
This machine may only be utilized for the purpose for which it was designed, i.e. agricultural
use, for the cutting of shoots, grass and brushwood.
Any other use other than that stated, not covered or deducible from this Manual and the
enclosed Engine Manual is "PROHIBITED".
Failure to comply with instructions in this Manual and in the Engine Manual releases the
manufacturer from all liability, in particular for any damage resulting from improper or
incorrect use, through negligence, superficial interpretation or flagrant disregard for the
safety requirements herein.
Get your dealer to explain how to use the machine in optimum safety conditions.
Always perform the checks as prescribed herein before each work session with the machine.
Should any information given in the following pages be unclear or not straightfor-ward
please contact the manufacturer directly.
1. USE OF THE MANUAL
This Manual consists of numbered pages and enclosures featured in the list of contents.
Before operating the machine the user must read the instructions in the Operator's Manual
caRefully as well as those of the Engine Manual enclosed.
Use of the flail mower by more than one operator (individually), means that they must
have carefully read the Operator's Manual and the Engine Manual before using it.
The aforementioned manuals form an integral part of the machine and must therefore be
kept intact and in good condition, in a known, easily accessible place for the entire working
life of the machine, even if the flail mower is passed on to another owner. The purpose of
these manuals is to provide the information necessary for the safe and competent use of
the product. In the instance of wear or purely for a greater technical working knowledge,
the manufacturer may be contacted directly. The Notes Section at the end of the Flail
mower Manual is for the addition of any complementary notes.
In this Manual all safety information appears in special boxes headed “WARNING”.
WARNING
This heading is used to draw the user's attention to hazardous areas or moving parts of
the machine. It is also used in instances where failure to comply with the instructions given
may result in injury to persons and animals or damage to property.
- 5 -
2. NOTICE ON THE MACHINE
The symbols affixed to the machine serving to warn of danger during its use and
maintenance are as follows:
THE USER MUST READ THE INSTRUCTION MANUAL PROVIDED
DANGER OF FOREIGN OBJECTS BEING THROWN
OUTWARDS. KEEP A SAFE DISTANCE
ALWAYS DISCONNECT THE CABLE FROM THE ENGINE SPARK PLUG.
DANGER OF HAND INJURY. SWITCH OFF THE ENGINE
- 6 -
DANGER OF CRUSHING. KEEP A SAFE DISTANCE
DANGER OF INJURY TO BOTH UPPER AND LOWER LIMBS.
DO NOT PUT HANDS OR FEET INSIDE THE CUTTING
ELEMENT WHILE IN MOTION
DANGER OF GETTING CAUGHT UP IN ROTATING PARTS.
DO NOT PUT HANDS IN THE ROTATING PARTS
DANGER OF FOREIGN OBJECTS BEING THROWN OUTWARDS.
SAFETY GOGGLES MUST BE WORN
- 7 -
EAR DO NOT ALLOW CHILDREN NEAR THE MACHINE
WHEN IN OPERATION.MUFFS MUST BE WORN
CAUTION: HOT PARTS. DANGER OF BURNS. FIRE HAZARD
The symbols affixed to the machine serve to warn of danger during its use and maintenance.
It is vitally important to understand the meaning of the danger notices and all messages
should be kept in legible condition. In the instance of wear these no-tices should be
replaced and use of the machine suspended while without such notices.
The operator is advised to observe the warnings given on the affixed notices.
- 8 -
3. TECHNICAL DATA OF THE MODEL 610
ENGINE: petrol HONDA GX 200 K1
ENGINE CAPACITY: 4.8 kW (6.5 HP)
ENGINE FILTER: dry filter
WORKING WIDTH: 60 cm
CUTTING HEIGHT: adjustable 20 - 80 mm
CUTTING SYSTEM: 32 flail rotor
SPEED GEARS: 2 forward gears – 2 reverse gears
TRASMISSION: mechanical
GEARS: in oli bath
SPEED: forward (1) 1.80 km/h (2) 3.30 km/h
reverse (1) 1.80 km/h (2) 3.30 km/h
WHEEL RELEASE MECHANISM: mechanical
START: recoil
SERVICE BRAKE : on wheel axle
ROTOR BRAKE : on rotor drive
HANDLEBARS: height-adjustable
TYRES: Tractor 13 x 5.00-6
SIZE L x W x H (mm): 1400 x 660 x 800
WEIGHT (kg): 120
ACOUSTIC PRESSURE, measured according to EN 12733 : 89 dBA
ACOUSTIC POWER, measured according to EN 12733 : LWA 98 dBA
HANDLEBAR VIBRATION ( EN 12 733) AW : 1,88 m/s²
Environmental conditions
Unless otherwise stated at the time of ordering it is understood that the machine is to work
normally in the environmental conditions covered by the following points.
Environmental conditions other than those described may cause mechanical breakage
resulting in the creation of dangerous situations for persons.
- 9 -
ALTITUDE
The altitude of the place in which the machine is to be used must not exceed 1500 m
above sea level.
TEMPERATURE
Minimum ambient temperature: -5°C
Maximum ambient temperature: +50°C
ATMOSPHERIC CONDITIONS
The electrical equipment will function correctly in atmospheric conditions with a relative
humidity up to 50% at a temperature of 40°C and at 90% with a temperature up to 20°C
(without condensate).
ATMOSPHERE WITH RISK OF EXPLOSION AND/OR FIRE
The standard machine herein described is not designed to work in explosive atmospheres
or in those with risk of fire.
4. LIFTING AND TRANSPORTATION
All material is carefully checked by the manufacturer before shipping. The flail mower is
delivered in a wooden crate or cardboard box with the handlebars and front support with
wheels disassembled.
Upon receipt of the machine make sure that it has not been damaged during transit and
that the packaging has not been tampered or any parts removed. Report any damage or
missing parts immediately to the driver and the manufacturer with photographic
documentation.
After assembling the handlebars, the front support with wheels and the safety bar as per
the instructions given in paragraph 7 of this manual, the machine may be moved on its
own wheels.
The manufacturer is not liable for any damage caused by transportation of the machine
after its delivery.
WARNING
Extreme care must be taken during handling to prevent overturning. Avoid steep gradi-
ents to prevent loss of control. Make sure that there are no persons present within the
danger area.
- 10 -
5. MAIN PARTS OF THE MACHINE
The machine consists of the following main parts:
A - FORWARD CLUTCH CONTROL LEVER
B - ACCELERATOR CONTROL LEVER
D - FLAIL ROTOR CLUTCH CONTROL LEVER
E - RIGHT WHEEL RELEASE LEVER
E1 - LEFT WHEEL RELEASE LEVER
F - ENGINE
G - FRONT WHEELS
H - FRONT GUARD
I - CUTTING HEIGHT ADJUSTMENT LEVER
L - HANDLEBAR HEIGHT ADJUSTMENT LEVER
M - ON/OFF SWITCH (1/0)
N - SPEED SELECTOR LEVER
O - GEAR LEVER
- 11 -
Figure 1
Figure 2
Table des matières
Manuels Tondeuse à gazon populaires d'autres marques
RHINO
RHINO 1958 Manuel utilisateur
Wolf Garten
Wolf Garten Compact plus 40 B Manuel utilisateur
Cub Cadet
Cub Cadet LTX 1045 Manuel utilisateur
Craftsman
Craftsman 917.378461 Manuel utilisateur
GGP ITALY SPA
GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur
Challenge
Challenge CH18V2 Instructions de fonctionnement
TALEN TOOLS
TALEN TOOLS AVR HGM30 Manuel utilisateur
DEWEZE
DEWEZE ATM-725 Manuel d'utilisation
Weed Eater
Weed Eater 180083 Manuel utilisateur
Husqvarna
Husqvarna Poulan Pro PP185A42 Manuel utilisateur
Better Outdoor Products
Better Outdoor Products Quick Series Manuel utilisateur
Cub Cadet
Cub Cadet 23HP Z-Force 60 Manuel d'utilisation
