Midea MTE150-P2004S Manuel utilisateur

Service Manual

TWIN TUB WASHING MACHINE

Model:MTE150-P2004S

Note:

Before serving the unit, please read this at first,

Always contact with your service center if meet problem.

1. PRECAUTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-1. Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-2. Servicing Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. CAUTION FOR SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Description of Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-1. Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-3. . Grounding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.DISASSEMBLY AND TEASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5. SCHEMATIC DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6. TROUBLE SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7. CHECK POINT AFTER REPAIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-1

2-1

3-1

3-2

3-3

3-4

4-1

5-1

6-1

7-1

CONTENTS

1. PRECAUTION

When performing troubleshooting and part replacement during servicing, note the

following safety precautions:

1-1. Safety Precautions

1-1-1. Use Genuine Parts

The components of the washing machine have safety features such as non-combustibility

and voltage withstanding. Therefore, always use the same part as suggested by the maker.

In particular, be sure to use only designated parts in case of major safety parts identified

by the marker.

1-1-2. Grounding

Connect the grounding wire to the shell plate, and bury it under at least 25cm of earth :

alternatively, connect the ground wire to the appropriate pin on a properly grounded

power receptacle. Never connect the wire to a telephone line, lightning rod, or gas pipe.

1-2. Servicing Precautions

1-2-1. Observe Warnings

Be sure to follow special warning and precautions that are described on part labels and in

the owner's manual.

1-2-2. Parts Assembly and Wiring

Be sure to use insulation material (such as tube and tape). And be sure to restore all parts

and wires to their original position. Take special care to avoid contact with sharp edges.

1-2-3. Perform Safety Checks after Servicing

After servicing, check to see that the screws, parts, and wiring are restored to their

original positions, and check the insulation between the external metals and the socket

plug. In addition, place the washing machine in a level position (less than 1(one) degree)

to prevent vibration and noise during operations.

1-2-4. Insulation Checks

Pull out the plug from the power receptacle, pour water into the spin tub, and then set

the timer. Check to see that the resistance insulation between the terminals of the plug

and the externally exposed metal is greater than 1M• .

Note :When it is impossible to perform insulation check with a 500V insulation

resistance tester, use other testers for inspection.

1-1

2-1

2. CAUTIONS FOR SAFETY

• Please observe the following notes for safety.

• The symbols indicate as follows.

Symbol Meaning

WARNING

Indicates possibility of death or serious injury of a repair technician and a

person nearby through the misconducted work, or of a user by a defect of the

product after the work performed by the technician.

CAUTION

Indicates possibility of injury or physical damages* of a repair technician and a

person nearby through the misconducted work, or of a user by a defect of the

product after the work performed by the technician.

*Means secondary damages of property, furniture, domestic animal and pet.

Symbol Meaning

ELECTRICSHOCK

• indicates a caution (including a warning).

Specific instruction is followed by a graphic or characters in or near • .

Symbol left warns an electric shock.

DONOT

DISASSEMBLE

indicates prohibition (act must not be conducted).

Specific instruction is followed by a graphic or characters in or near

Symbol left warns not to disassemble.

UNPLUG

• indicates forcing (act must be conducted).

Specific instruction is followed by a graphic or characters in or near • .

Symbol left warns to unplug the power cord.

WARNING

OUT OF CHILD

• Advise the customer to keep children out of the work place.

Children may be injured with a tool or a disassembled part.

UNPLUG POWER

• Unplug power cord for the work such as disassembling which is not

unnecessary to power on . Do not hold the plug by a wet hand.

Failing to unplug may cause an electric shock.

USE

REPAIR PARTS

• Use the specified repair parts when repairing the product.

Otherwise, a malfunction or a defect may occur.

Also, a short circuit, ignition or other danger to the customer may occur.

2. CAUTIONS FOR SAFETY

WARNING

CHECK INSULATION

RESISTANCE

• After repair, measure insulation resistance between the charging part

(power cord plug) and the non-charging metallic part (ground) with an

insulation resistance meter (500V). The resistance shall be 10M• or more.

Failing to check the insulation resistance may cause a short circuit, electric

shock or other diseases to the customer.

DO NOT MODIFY

• Do not modify the product.

An electric shock or ignition may occur.

DO NOT

DISASSEMBLE AND

REPAIR

• Only a repair technician can disassemble and repair.

An electric shock, ignition or malfunction may cause injury.

USE EXCLUSIVE

SOCKET

• Use an exclusive 110 VAC/15 A socket for the washing machine.

(AW-B651B/B657B/B761S/B757S)

• Use an exclusive 220 VAC/17 A socket for the washing machine.(Except

above models)

Otherwise, an electric shock or ignition may cause. Sharing the same socket

with other instrument causes heating of a branch socket and result in a fire.

CONNECT

GROUNDING WIRE

• Connect the grounding wire.

Failing to do so may cause an electric shock when a short circuit occurs.

Consult an electric work shop or a sales shop.

DO NOT USE WET

PLACE

• Do not install in a bath room or a place exposed to wind or rain.

An electric shock or a short circuit may cause a fire.

DO NOT SPLASH

WATER

• Do not pour or immerse electrical parts into water or liquid solution.

An electric shock or ignition may occur.

REMOVE DUST

• Wipe off dust adhered to the plug of power cord.

Dust may cause a fire.

2-2

2. CAUTIONS FOR SAFETY

WARNING

AVOID

INFLAMMABLE

• Do not put inflammable into the washing tub.

Do not put cloths stained with kerosene, gasoline, benzene, thinner, alcohol,

etc. lt may cause a fire or explosion.

DO NOT TOUCH

• Do not touch the laundry before the spin basket stops completely.

The laundry entangles your hand causing an injury even if the basket rotates

slowly. Pay special attention to children.

INSTALL

CAREFULLY

• Ask an electric work shop to install the product.

Install the product securely and safely according to the electrical equipment

technical standard and the wiring standard.

Incorrect work causes an electric shock and a fire.

DO NOT PULL

• Do not pull the power cord when unplugging.

Hold the power plug to unplug.

An electric shock or short circuit may cause a fire.

DANGER HAND

• Do not insert your hand under the washing machine during operation.

There is a rotary part under the machine which may cause an injury.

WATER LEAKAGE

• Before starting washing, open the faucet and check water supply hose joint

which shall not be loosened for no water leaks.

The loose screw or hose joint may cause water leakage resulting in an

unexpected damage.

2-3

3. DESCRIPTION OF PARTS

3-1

3. DESCRIPTION OF PARTS

3-1. Control Panel

3-2

●Water inlet: be used to inject water.

●Wash timer: be used to select required washing time.

●Spin timer: be used to select required spinning time.

●Wash selector: Choose “ Normal”or“ Heavy” according to laundry fabric.

●Drain selector: For upper drain,Choose “Wash”for washing,choose “Rinse”for

rinsing;choose “ Drain” for

draining.For lower drain,Choose “Wash/Rinse”for washing or

rinsing;choose “ Drain” for

draining.

3. DESCRIPTION OF PARTS

3-2. Installation

3-2-1. Level Specifications and Wall - Clearance Distances

1) Install the washing machine on a solid and level floor.

2) Place the machine at least 15cm away from the wall.

3) Placement on an inclined, weak or rough floor may

cause abnormal noise or trembling.

3-2-2. Positioning the Drain Hose

1)When there is no threshold, the length of the

drain hose should not exceed 3m.

2)When it is necessary to connect the drain hose

with the drain outlet far away, connect the

extension hose and

applicable parts

available from

dealers or service

centers.

3) Do not install the drain hose where it must exceed

over a threshold of 3cm or more ; do not install

where there is a

threshold

and the hose

must exceed for

more than 2m.

3-3

3. DESCRIPTION OF PARTS

3-2-3. Grounding

1) Upon installing grounding,make sure if power socket is out

of power outlet.

2) Grounding should be connected to eithermetal water

supply

pipe or copper grounding pole deeper than 25cm in the damp

ground. (Fig 1)

3) If water pipe is a plastic, no protection is obtained from

a possible electric shock.

4) If the power outlet is available with grounding connection,

grounding in the washingmachine should be firmly connected

the connection of the outlet. (Fig 2)

5) You should not connect, the grounding to the gas-pipe

because

it will cause an explosion. (Fig 3)

6) If the grounding is connected to either telecommunication

line

or lightning-arrest line, an extreme hazard is caused therefore,

no connection should bemade to such lines. (Fig 4)

3-4

Table des matières

Autres manuels Midea Rondelle

Midea

Midea MAV10-A2804PS/01FM-US Manuel utilisateur

Midea

Midea G06 Manuel utilisateur

Midea

Midea Sicily Glory G01 Manuel utilisateur

Midea

Midea MF200W85B Series Manuel utilisateur

Midea

Midea MF200W70B/E Manuel utilisateur

Midea

Midea MAD160-A2801GPS Manuel utilisateur

Midea

Midea MAR30-P0501GP Manuel utilisateur

Midea

Midea MA500W150 Series Manuel utilisateur

Midea

Midea MF200W80WB Series Manuel utilisateur

Midea

Midea MAH180-A2801PS/01FM-US Manuel utilisateur

Midea

Midea MFN75-S1403/C31E-AU(25) Manuel utilisateur

Midea

Midea M Series Manuel utilisateur

Midea

Midea MFC80-JS1403B/C14E-AU Manuel utilisateur

Midea

Midea MG-52-10508 Manuel utilisateur

Midea

Midea KL15TTGIW Manuel utilisateur

Midea

Midea MFW-1250MV2 Manuel utilisateur

Midea

Midea 360111 Manuel utilisateur

Midea

Midea MFES06W50/W-ES Manuel utilisateur

Midea

Midea MFH180-G1302DS F01E-US Comment utiliser

Midea

Midea 360215 Manuel utilisateur

Midea

Midea MFL70S12 Manuel utilisateur

Midea

Midea MT700W Manuel utilisateur

Midea

Midea MTW70 Manuel utilisateur

Midea

Midea MFW-801S Manuel utilisateur

Manuels Rondelle populaires d'autres marques

Tricity Bendix

Tricity Bendix AW 1000 W Guide produit

Panasonic

Panasonic NA-F60L5WRB Manuel utilisateur

GE WSLP1500 Manuel

Electrolux

Electrolux EWF1284EDW Manuel utilisateur

Bosch

Bosch WAN2829BSN Manuel utilisateur

LG TV2516DV3B Manuel utilisateur

LG TH2517DSAV Manuel utilisateur

VESTEL

VESTEL CMH-XL 7510 TE Manuel utilisateur

AEG

AEG 74335 Manuel d'utilisation

Johnson

Johnson JWF721A Manuel utilisateur

Beko

Beko WTE7604XLW0 Manuel utilisateur

Danby

Danby DTT100A1WDB Instructions de montage

Amica

Amica WA 14 Ex Manuel utilisateur

Daewoo

Daewoo DWD-F1222 Manuel utilisateur

Bosch

Bosch WAS28461AU Manuel utilisateur

Miele

Miele PW 6080 Vario Manuel utilisateur

Finlux

Finlux FLX108CF220 Manuel utilisateur

Whirlpool

Whirlpool 3LBR5132AN0 Manuel utilisateur