Midea MSU16U6DBBC Manuel utilisateur
USER MANUAL
MANUEL DE L’UTILISATEUR
MSU16U6DBBC
Warning notices: Before using this product, please read this manual carefully and keep it for future reference.
The design and specifications are subject to change without prior notice for product improvement.
Consult with your dealer or manufacturer for details.
The diagram above is just for reference. Please take the appearance of the actual product as the standard.
1.6 GALLON WARM AND COOL MIST
ULTRASONIC HUMIDIFIER
HUMIDIFICATEUR ULTRASONIQUE A VAPEUR
CHAUDE ET FROIDE DE 1,6 GALLON
Avertissements : Avant d'utiliser ce produit, merci de lire attentivement ce manuel et de le conserver pour
toute référence ultérieure. La conception et les spécifications sont susceptibles d'être modifiées sans
préavis afin d’améliorer le produit.
Consulter votre revendeur ou le fabricant pour plus de détails.
Le schéma ci-dessus n'est que pour référence. Merci de considérer l'apparence du produit réel comme la
norme.
THANK YOU LETTER
Thank you for choosing Midea! Before using your new Midea product, please read
this manual thoroughly to ensure that you know how to operate the features and
functions that your new appliance offers in a safe way.
01
CONTENTS
0
02
1
06
07
08
THANK YOU LETTER
SAFETY INSTRUCTIONS
SPECIFICATIONS
PRODUCT OVERVIEW
OPERATION INSTRUCTIONS
EN
1 7
1 6
1 5
1 3
CLEANING AND MAINTENANCE
TROUBLESHOOTING
TRADEMARKS, COPYRIGHTS AND LEGAL STATEMENT
DATA PROTECTION NOTICE
02
Danger
This symbol indicates that there are dangers to the life and health of
SHUVRQVGXHWRH[WUHPHO\áDPPDEOHJDV
Warning of electrical voltage
This symbol indicates that there is a danger to life and health of
persons due to voltage.
Warning
The signal word indicates a hazard with a medium level of risk which, if
not avoided, may result in death or serious injury.
Caution
The signal word indicates a hazard with a low degree of risk which, if
not avoided, may result in minor or moderate injury.
Attention
The signal word indicates important information (e.g. damage to
property), but not danger.
Observe instructions
This symbol indicates that a service technician should only operate and
maintain this appliance in accordance with the operating instructions.
The following safety guidelines are intended to prevent unforeseen risks or damage from
unsafe or incorrect operation of the appliance. Please check the packaging and appliance
on arrival to make sure everything is intact to ensure safe operation. If yRXàQGDny
damage, please contact the retailer or dealer. Please notHPRGLàFations or alterations to
the appliance are not allowed for your safety concern. Unintended use may cause
hazards and loss of warranty claims.
Read these operating instructions carefully and attentively before using/commissioning the
unit and keep them intheimmediate vicinity of theinstallation site or unit for later use!
Intended Use
Explanation of Symbols
SAFETY INSTRUCTIONS
EN
SAFETY WARNING
●
●
●
●
●
●
●
●
●
●
●
●
●
Always place the unit on a smooth, flat, lint-free,
non-metallic, waterproof and level surface and keep it
away from direct sunlight.
Always place the unit 2 feet (60 cm) above the floor, 12
inches (30 cm) away from the wall, other appliances or
wooden furniture.
Do not place the unit on carpet, towel or wood surface,
which will block the vent and may damage the unit.
To avoid electric shock, do not use wet hands to plug
and unplug the unit.
Do not start the unit when the water tank is empty.
Do not add any additives into the water tank that are
not produced or supervised by our company.
Do not put anything except water into the water tank.
Do not add water through the mist outlet.
While the humidifier is operating, do not touch the
water inside the unit or any parts submerged in water.
Do not cover or block the mist outlet, the mist outlet
should be kept clear at all times.
Do not replace the power cord without authorization
from an authorized representative.
Always ensure proper contact between the power cord
and outlet.
Never use this appliance on the same circuit as other
appliances.
03
SAFETY PRECAUTIONS
READ AND SAVE THESE
INSTRUCTIONS
EN
Do not place the appliance near a water source.
Do not disassemble, modify or repair internal parts
without authorization from an authorized
representative.
Do not climb or sit on the appliance.
Do not store appliance near or around flammable items,
explosive items or heat sources.
Do not directly flush the humidifier with water.
Always use the power button to turn off the humidifier
before unplugging the power cord.
Always use filtered or distilled water and do not use
hard water.
Please do not use a damaged or worn power cord; Do
not replace the power cord without authorization. If the
power cord is damaged, it must be replaced by the
manufacturer, its service department or professional
from similar department to avoid danger.
Power off and unplug the humidifier during
thunderstorms.
During an abnormal phenomenon (like a burnt smell),
power off the humidifier and unplug the power cord.
After a long period of no use, power off the humidifier
and unplug the power cord then, clean the water tank
according to the "Cleaning and Maintenance"
instructions.
To avoid bacterial growth, consistently change the
water in the water tank and base.
Before moving the appliance, always unplug the power
cord.
If the appliance is tilted when filled with water, be sure
to unplug the power cord immediately and send it for
inspection.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
04
EN
●
●
●
●
●
The suitable ambient temperature for use of this
product: 5°C~40°C, relative humidity: <80% RH
(Please use pure water with temperature less than
40°C). A tolerance of±10%RH is applied to the
accuracy of the inner humidity sensor. Each sensor has
its own variation in accuracy.Therefore, the
measurement results of different qualified sensors will
be different. Differences in measurement locations can
also cause measurement differences.
Do not run cord under carpeting.
Do not cover cord with throw rugs, runners or similar
coverings.
Do not route cord under furniture or appliances.
Arrange cord away from traffic area and where it will
not be tripped over.
●
●
Please note that any changes or modifications of this
product not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
05
EN
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit di
erent from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
06
EN
SPECIFICATIONS
MSU16U6DBBCModel
Rated Frequency 60Hz
Rated Power 105W
Water Tank Capacity 1.6 gallon
Net Product Weight 5.07Ibs
Dimensions 9.25*8.07*12.80 inch
Rated Voltage 120V~
NOTE
The following are the design parameters of MSU16U6DBBC. The measured parameters are
subject to the product; The humidification amount will vary, depending on the tempera-
ture and humidity inthe room.
The maximum humidification is 330mL/h.
07
EN
PRODUCT OVERVIEW
Component Name
NOTE
All thepictures inthis manual are for explanation purpose only. Any discrepancy
between the real object and the illustrationin the drawing shall defer tothe real product.
This humidifieris pre-assembled infactory.
Essential Oil Tray
Water Tank
Front Panel
Shell
Base
Sponge Cap
Tank Lid
Display & Control
Panel
Mist Outlet
Sponge
Hot Plate Cover
08
EN
OPERATION INSTRUCTIONS
The current
environmental humidity
is displayed by default
Humidity valueUnit:
%RH
• Displays the ambient humidity value and “- -”.
• Displays the off timer and “H”.
• Displays humidity level.
• Displays fault code, software version number.
• Displays the cleaning reminder mark “CL”.
• It is on when the device is turned on and a humidity
value is detected.
• In standby mode, it will be on for 60 seconds by default.
• It is off when the device is turned on and the AUTO
function is turned off.
• It is on when the device is turned on and the AUTO
function is turned on.
• In standby mode, it will be on for 60 seconds by default.
• It is on when the device is turned on and a shut- off
timer is set.
Icon Name Icon Status
WARM Light
AUTO Light
Timer
% Light
Double-8
Light
• Under power-on conditions, it will light up when the
WARM function is turned on, and turn off when the
WARM function is turned off.
• It flashes for cleaning reminder.
• In standby mode, it will be on for 60 seconds by default.
Description of Display
MINUTERIE HUMIDITÉ
GRADATEUR
MARCHE/ARRÊT
CHAUD
DIMMER
09
EN
Control Panel Operations
• When the unit is turned on and the constant humidity function is off,
press the button to turn on the ECO humidity function , Press it again to
turn off this function.
• Repeatedly tap to set a shut-off timer of 0, 1, 2, 4, or 8 hours.
• When the unit is turned on, press this button to turn on the warm mist
function, press it again to turn off the function.
• Repeatedly tap to cycle between light colors of red, green, blue,and
none.
Function description
• Tap to power on the humidifier and tap again to power off the
humidifier.
• Repeatedly tap to cycle between mist level 1, 2, and 3
DIMMER
NOTE
Afterpower-on, when the product is instandby state, the display icon light “ +++”
will be on at the same time. If there is no operation within 60 seconds,thedisplay will
enter the off-screen state.
Afterpower on, youcan turn on/off the screen-off function by pressing and holding the
key combination “ +” for 3 seconds.
"--" indicates water is flowing from thetank to the base.
"P1" indicates shortage of the water,water needs to beadded to the tank.
Table des matières
Langues :
Autres manuels Midea Humidificateur
