Middle Atlantic Products UPS-IPCARD Manuel utilisateur

I-00453 Rev B

UPS SERIES

Network Interface Card

UPS-IPCARD

User’s Manual

Page 2

TABLE OF CONTENTS

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4

INSTALLATION GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 9

WEB INTERFACE (REMOTE MANAGEMENT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 42

RESET TO DEFAULT SETTING/RECOVER FROM A FORGOTTEN PASSWORD . . . . . . . . . . . 43

FIRMWARE UPGRADE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 - 47

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 - 50

Page 3

INTRODUCTION

Overview

The Middle Atlantic Network Interface Card allows for remote monitoring and control of a UPS attached to a

network. After installing the hardware and configuring an IP address, the user can access, monitor, and

control the UPS from anywhere in the world. Simply use a web browser such as Internet Explorer or Firefox

to access your UPS. Servers and workstations can be protected by the UPS utilizing the Power Manager to

gracefully shutdown when signaled by the Network Interface Card.

Features

zReal time UPS monitoring

zRemote management and configuration of UPS via Web Browser or NMS

zAuto-shutdown to protect servers/workstations from data lose due to power failure

zSchedule shutdown/start-up/reboot of the UPS via remote control

zEvent logging to trace UPS operational history

zData logging for analyzing power conditions

zEvent notification via email and SNMP traps

zSupport TCP/IP, UDP, SNMP/HTTP, NTP, DNS, SMTP protocol

zSNMP MIB provided

zQuick installation and user friendly interface

zUser upgradeable firmware via FTP

zSecurity management provided

System Requirements

•A computer with a Windows or Linux Operating System (for optional Power Manager Client)

•An Ethernet connection to an existing network

•NMS (Network Management Station) compliant with SNMP (for optional NMS management)

Page 4

Middle Atlantic

Network

Interface Card

PC Protected by Middle Atlantic

Products

Power Manager

Remote NMS/Web

Browser

Supported

UPS

Server Protected by Middle

Atlantic Products

Power Manager

Workstation Protected by Middle

Atlantic Products

Power Manager

APPLICATION

UNPACKING

Inspect the Network Management Card upon receipt. The package should contain the following:

•Middle Atlantic Network Interface Card.

•Middle Atlantic Products Power Manager CD with software and user manuals.

SLOT

CARD

Page 5

INSTALLATION GUIDE

Step 1 - Hardware Installation

1)Turn off the UPS before removing the expansion port cover on the UPS.

2)Remove the two retaining screws from the expansion port cover and remove the cover.

3)Install the Middle Atlantic UPS-IPCARD into the expansion port.

4)Re-install and tighten the retaining screws.

5)Connect the Ethernet cable to the LAN port on the Middle Atlantic UPS-IPCARD.

6)Turn on the UPS.

Page 6



LINK Indicator

Ethernet connector

RX/TX Indicator



Definitions for LED Indicators



Link LED color Condition

Off

The Network Management Card is not

connected to the Network/or the Network

Interface Card Power is off.

On(Yellow) The Network Interface Card is connected to

the Network.

RX/TX LED

color

Off The Network Interface Card power is off.

On(Green) The Network Interface Card power is on.

Flashing - Receiving/transmitting data packet.

- Reset finished.



Step 2 - Configure the IP address for the Middle Atlantic Network Interface Card.

Method 1: Using the Middle Atlantic Power Device Network Utility Tool

1) Install the Middle Atlantic Power Device Network Utility Tool from the included CD. It is located

on the CD in the \software folder. Double click the “Middle Atlantic UPS-IPCARD Setup Utility”

installation file, “MAP_SNMP_Setup.msi” to begin the installation.

2) After installation is complete, run the “Middle Atlantic UPS-IPCARD Setup Utility” program. Under

“All Programs”, select “Middle Atlantic UPS-IPCARD Setup Utility.”

3) The main dialog of the “Middle Atlantic UPS-IPCARD Setup Utility” program is shown in Figure

1. The configuration tool will display all Middle Atlantic network cards of present on the same

network. The "Refresh" button is used to search the entire local network for SNMP cards.

Page 7

Figure 1. The main window of the “Middle Atlantic UPS-IPCARD Setup Utility” program.

4) Select the SNMP card you are setting up. Click on the Tools menu and select “Device Setup” or double

click the SNMP card you want to configure.

5) You can modify the IP Address, Subnet Mask, and Gateway address for the Device MAC Address

listed in the Device Network Settings window, as shown in Figure 2. The default IP Address is

192.168.20.177, the default Subnet Mask is 255.255.255.0.

Figure 2 - The SNMP card-setting window

6) To modify the IP Address, Subnet Mask, or Gateway Address, enter the new addresses into the

corresponding fields.

Page 8

7) You will need to enter a User Name and Password for the SNMP card in the authentication window, as

shown in Figure 3. *Default user name: admin; Default password: admin

Figure 3 - Authentication window

8) If IP address is successfully set, you will see a message that the IP set up is OK, as shown in Figure 4.

Figure 4 - Setup IP Address successfully message

Page 9

Method 2: Using a command prompt

1) Obtain the MAC address from the label on the Network Interface Card labels on top. Each Interface

card has a unique MAC address.

2) Use the ARP command to set the IP address.

Example:

To assign the IP Address 192.168.20.240 for the Network Interface Card, which has a MAC

address of 00-0C-15-00-00-01 you will type in the following command prompt from a PC connected

to the same network as the Network Interface Card.

1. Type in “arp-s 192.168.20.240 00-0C-15-00-00-01” then press Enter.

3) Use the Ping command to assign a size of 123 bytes to the IP.

1. Type in “ping 192.168.20.240 -1 123” then press Enter

2. If the replies are received, your computer can communicate with the IP address.

To select an IP address for the Network Interface Card, please refer to Appendix 1.

UPS REMOTE MANAGEMENT LOGIN

UPS REMOTE MANAGEMENT LOGIN:

There are two user account types.

- Administrator (default username: admin; default password: admin)

- Viewer (default username: guest; default password: guest)

The Administrator can access and control all functions, including enable/disable of the Viewer account.

The Viewer’s access allows them read permissions for all functions but they cannot control or change any settings.

Page 10

Autres manuels pour UPS-IPCARD

Table des matières

Autres manuels Middle Atlantic Products Carte réseau

Middle Atlantic Products

Middle Atlantic Products UPS-IPCARD Manuel utilisateur

Manuels Carte réseau populaires d'autres marques

FirstComm

FirstComm OBiWiFi5G Manuel utilisateur

Sun Microsystems

Sun Microsystems Interface Adapter Manuel utilisateur

TRENDnet

TRENDnet TU2-ETG Manuel utilisateur

YASKAWA

YASKAWA SI-EN3 Manuel utilisateur

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuel utilisateur

Belkin

Belkin F5D7050 Manuel utilisateur

3Com

3Com EtherLink 3C509B Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITX Manuel utilisateur

Cisco

Cisco MC16E Manuel utilisateur

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuel utilisateur

TwinMOS

TwinMOS Booming Manuel utilisateur

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur

National Instruments

National Instruments NI 9234 Manuel utilisateur

Hama

Hama 49276 Manuel utilisateur

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation

Compaq

Compaq Wireless LAN 100 Manuel utilisateur

Bose

Bose PowerMatch Dante Manuel utilisateur