Microsens MS659150M Manuel utilisateur

Indoor Enterprise Access Point

- User Manual - MS659150M

MICROSENS GmbH & Co. KG

Kueferstr. 16

59067 Hamm/Germany

Tel. +49 2381 9452-0

FAX +49 2381 9452-100

E-Mail [email protected]

Web www.microsens.de

Table of Contents

1. Scope of Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

2. Getting to know your Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

2.1. LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê2

3. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê3

4. Establish AP Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê3

4.1. Connect to Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê4

4.2. Manually Assign Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê4

4.3. Automatically Elect Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê7

4.4. Change Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê7

5. Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê9

5.1. Dashboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê10

5.2. Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê10

5.3. Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê22

5.4. Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê24

5.5. QoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê31

5.6. System Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê33

6. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê38

6.1. Computer is disconnected from the Access Point. . . . . . . . . . . . . . . . . . . . . . . . . . . Ê38

6.2. Cannot find the Wi-Fi network or cannot connect to the Access Point.. . . . . . . . . . . . Ê38

6.3. Cannot access the Web User Interface to configure settings. . . . . . . . . . . . . . . . . . . Ê39

7. Tips & Tricks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê39

7.1. Get the best Wi-Fi signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê39

7.2. Surf the Internet faster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê39

7.3. Network security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê39

8. Technical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê39

8.1. Physical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê39

8.2. Wi-Fi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê40

Indoor Enterprise Access Point - User Manual -

MS659150M

- ii -

1. Scope of Delivery

The box contains the following items:

•Wi-Fi Access Point

•Ceiling installation kit

•Screw x 1(For securing the ceiling mount bracket)

•12V-2.5A AC Adaptor (Optional Accessory)

•Quick Start Guide

2. Getting to know your Access Point

•DC 12V: Use the AC adaptor to connect your access point to a power source.

•1G Eth: Connect Ethernet cable for LAN (local area network) connection.

•2.5G Eth PoE: Connect Ethernet cable for LAN (local area network) connection, or a con!

nection with LAN and PoE+.

Indoor Enterprise Access Point - User Manual -

MS659150M

- 1 -

2.1. LEDs

The LEDs indicate the access point’s power and connection as follows:

Flashing Amber Device is being powered on

Cyclic between

Amber/Red

Firmware upgrade in process.

Solid Amber Device has no Internet access.

Indoor Enterprise Access Point - User Manual -

MS659150M

- 2 -

Solid Green Device is powered on and works normal.

Solid Blue Device is Controller and normal.

Solid Red Device is in error and cannot provide services normally.

3. Installation

1. Position your access point for best performance.

Before you install and mount your access point as described in the installation guide, con!

sider how you can position the access point for best performance. The access point lets you

access your network anywhere within the operating range of your Wi-Fi network. However,

the operating distance or range of your Wi-Fi connection can vary significantly depending

on the physical placement of your access point. Therefore, choosing a good location is very

important.

2. Set up and connect the access point to your network.

You can connect the access point to a Power over Ethernet plus (PoE+) switch in your net!

work. The switch must be connected to a network router that is connected to the Internet.

If you don’t use a PoE connection, a power adapter is required for the access point as

shown below:

4. Establish AP Network

An AP Network contains many access points, and they play two roles in the network: Controller

and Agent. There is only one Controller in an AP Network, the others are Agents. The Con!

troller is the AP controller of this group and it will manage Wi-Fi and lots of other functions for

the entire group. The Controller is capable of controlling up to 64 access points in the same

group, including itself.

In an AP Network, we first configure the Controller’s Wi-Fi and other related information. For

details, please go to Network > AP Network. After the AP Network is established, the config!

urations of Controller will be automatically synchronized to all Agents.

Indoor Enterprise Access Point - User Manual -

MS659150M

- 3 -

In an AP Network, some APs with the same APNID value can establish another new AP net!

work. APNID can be configured in ACS server.

There are two ways to determine the Controller of an AP Network: manually assign Controller

and automatically select Controller. For details, please go to chapters 4.2 and 4.3.

4.1. Connect to Network

To set up the access point with an Ethernet connection to your network:

1. Connect an Ethernet cable to the port on the access point.

2. Connect the other end of the Ethernet cable to a port on a switch that is connected to your

network and to the Internet.

If you use a PoE connection, the port must support PoE+.

4.2. Manually Assign Controller

Configure the AP Controller

1. Place only one access point in a suitable location, and connect to the network as described

in step 4.1.

2. Open a web browser and enter the URL https://ms659150m.local.

3. Log in to the Web UI using the default username: admin and password (Located on bottom

of your access point).

4. Go to Network > AP Network > Basic to change AP Mode to Controller, then assign it as the

AP Controller of the AP network.

Indoor Enterprise Access Point - User Manual -

MS659150M

- 4 -

5. Visit the new URL https://ms659150m-cap.local in the browser to access to the

assigned Controller.

6. Go to Network > AP Network > Basic to change Wi-Fi settings, and remember to save your

settings.

7. Refer to 5. Settings in this guide for more configuration settings (optional).

Connect the AP Controller to Network

Connect Agents to the AP Network

1. Connect other access points to the same local area network to establish AP network. Record

the MAC address at the bottom of each access point and relative position in AP network.

When all access points have successfully connected to the network, only the Controller’s

LED is blue, the rest of the access points’ LEDs are green.

Indoor Enterprise Access Point - User Manual -

MS659150M

- 5 -

2. Go to Diagnostics > AP List, all the access points in AP network are displayed in the AP List.

Find the access point by MAC address recorded in the previous step, modify its AP Name

and AP Location by clicking the edit button in column Edit. Then you can quickly find an

access point, view information, and personalize its radio settings.

Connect Agents to Network



If the assigned Controller is disconnected for any reason, a certain Agent in

the network will be automatically elected as the new Controller in minutes to

ensure the network will be back to normal immediately. Once the assigned

Controller is recovered, it will act as the Controller of the AP Network again,

and the automatically elected Controller will become Agent again.

Indoor Enterprise Access Point - User Manual -

MS659150M

- 6 -

4.3. Automatically Elect Controller

Connect all APs to the same Network

1. Place all access points in suitable locations, and connect them to the same local area net!

work as described in step 4.1. Record the MAC address at the bottom of each access point

and relative position.

2. The AP Network will be established in minutes and a certain access point will be automati!

cally elected as the Controller of the AP Network. When all access points have successfully

connected to the network, only the Controller’s LED is blue, the rest of the access points’

LEDs are green.

Configure the automatically elected Controller

1. Open a web browser and enter the URL https://ms659150m-2.local to access to the auto!

matically elected Controller.

2. Log in to the Web UI using the default username: admin and password (Located on bottom

of your access point).

3. Go to Network > AP Network > Basic to change Wi-Fi settings, and remember to save your

settings. The Agents will synchronize Controller’s Wi-Fi settings in a few minutes.

4. Go to Diagnostics > AP List, all the access points in AP network are displayed in the AP List.

Find the access point by MAC address recorded in the previous step, modify its AP Name

and AP Location by clicking the edit button in column Edit. Then you can quickly find an

access point, view information, and personalize its radio settings.

5. Refer to 5. Settings in this guide for more configuration settings (optional).



1. When the AP Network is first established, the default AP mode of all access

points is Agent, the Controller of the AP Network can be automatically

elected or manually assigned.

2. When the assigned Controller exists in the network, the auto-elect mecha!

nism will not run.

3. If the original Controller is disconnected for any reason, a certain Agent in

the network will be automatically elected as the new Controller in minutes

to ensure the network back to normal immediately.

4.4. Change Password

Change Access Point Password

The user will be forced to change the password when logging into access point for the first

time.

Indoor Enterprise Access Point - User Manual -

MS659150M

- 7 -

•Username: Name used to sign in access point.

•Old Password: The default password located on bottom of the access point.

•New Password: New sign in password for access point. Its length must be 8-16 characters

and a strong password.

•Confirm Password: Confirm new sign in password for access point.

Indoor Enterprise Access Point - User Manual -

MS659150M

- 8 -

Autres manuels pour MS659150M

Table des matières

Autres manuels Microsens Point d'accès sans fil

Microsens

Microsens MS659150M Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur