Microscan HawkEye 1500 Series Manuel utilisateur

HawkEye™ 1500 Series

User Manual

EM-40391-1V241

v2.4.1, Nov 2008

1201 S.W. 7th Street, Renton, WA, U.S.A. 98057

(425) 226-5700 FAX: (425) 226-8682

customers to operate and/or service Microscan manufactured equipment and is not to be released, reproduced, or used

for any other purpose without written permission of Microscan.

Throughout this manual, trademarked names might be used. Rather than place a trademark (™) symbol at every

occurrence of a trademarked name, we state herein that we are using the names only in an editorial fashion, and to the

benefit of the trademark owner, with no intention of infringement.

Disclaimer

The information and specifications described in this manual are subject to change without notice.

Latest Manual Version

For the latest version of this manual, see the Download Center on our web site at: www.microscan.com.

Technical Support

For technical support, email: [email protected].

Microscan Systems, Inc.

1201 S.W. 7th Street

Renton, WA 98057

U.S.A.

Tel: 425 226 5700

Fax: 425 226 8250

[email protected]

Microscan Europe

Tel: 31 172 423360

Fax: 31 172 423366

Microscan Asia Pacific

R.O. Tel: 65 6846 1214

Fax: 65 6846 4641

Microscan Limited Warranty Statement and Exclusions

What Is Covered?

Microscan Systems Inc. warrants to the original purchaser that products manufactured by it will be free from defects in

material and workmanship under normal use and service for a period of one year from the date of shipment. This

warranty is specifically limited to, at Microscan’s sole option, repair or replacement with a functionally equivalent unit

and return without charge for service or return freight.

What Is Excluded?

This limited warranty specifically excludes the following: (1) Any products or parts that have been subject to misuse,

neglect, accident, unauthorized repair, improper installation, or abnormal conditions or operations; (2) Any products or

parts that have been transferred by the original purchaser; (3) Customer mis-adjustment of settings contrary to the

procedure described in the Microscan Systems Inc. owners manual; (4) Upgrading software versions at customer request

unless required to meet specifications in effect at the time of purchase; (5) Units returned and found to have no failure

will be excluded; (6) Claims for damage in transit are to be directed to the freight carrier upon receipt. Any use of the

product is at purchaser’s own risk. This limited warranty is the only warranty provided by Microscan Systems Inc.

regarding the product. Except for the limited warranty above, the product is provided “as is.” To the maximum extent

permitted by law, this express warranty excludes all other warranties, express or implied, including but not limited to,

implied warranties of merchantability and. Technical support questions may be directed to: [email protected]

Inc. does not warrant that the functions contained in the product will meet any requirements or needs purchaser may

have, or that the product will operate error free, or in an uninterrupted fashion, or that any defects or errors in the product

will be corrected, or that the product is compatible with any particular machinery.

Limitation of Liability

In no event shall Microscan Systems Inc. be liable to you or any third party for any special, incidental, or consequential

damages (including, without limitation, indirect, special, punitive, or exemplary damages for loss of business, loss of

profits, business interruption, or loss of business information), whether in contract, tort, or otherwise, even if Microscan

Systems Inc. has been advised of the possibility of such damages. Microscan Systems Inc.’s aggregate liability with

respect to its obligations under this warranty or otherwise with respect to the product and documentation or otherwise

shall not exceed the amount paid by you for the product and documentation. Some jurisdictions do not allow the

exclusion or limitation of incidental or consequential damages or limitations on an implied warranty, so the above

limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other

rights which may vary from state to state.

Tel: 425.226.5700 | Fax: 425.226.8250 | helpdesk@microscan.com

v2.4.1, Nov 2008 HawkEye™ 1500 Series User Manual v

Contents

PREFACE Welcome! xv

Purpose of This Manual xv

Manual Conventions xv

CHAPTER 1 Configurations 1-1

Selecting the Correct HawkEye™ to Read Your Data Matrix 1-1

Data Matrix Construction 1-3

Selection Criteria 1-4

Resolution 1-4

Field of View 1-4

Working Distance 1-5

Selecting A Lens 1-5

Standard Lens Selection Chart 1-5

Custom Lens Selection 1-6

Selecting Lighting 1-6

Standard Light Selection 1-6

HawkEye™ 1515 1-7

HawkEye™ 1525 1-8

HawkEye™ XL details 1-8

Custom Light Selection 1-9

HawkEye™ 1510 1-9

Contents

vi HawkEye™ 1500 Series User Manual v2.4.1, Nov 2008

CHAPTER 2 Connecting to the HawkEye™ 1500 2-1

Connectivity 2-1

TCP/IP Port 2-1

Serial Port 2-3

Rear Panel 2-4

Power Connector 2-5

Power Supply Wiring 2-6

Field I/O Connector 2-8

Grounding Tab (Optional) 2-11

I/O Expansion Module (Optional) 2-13

Using the I/O Expansion Module 2-14

I/O Expansion Module Connectors 2-16

I/O Interface Connector – J1 2-16

Opto In, Opto Out, & Strobe Output Terminal Block – TB1 2-17

General Purpose I/O Terminal Block – TB2 2-19

Field I/O Wiring Examples 2-20

Input Opto Wiring 2-20

Output Opto Wiring 2-21

General Purpose I/O Wiring 2-24

External I/O Terminal Block Adapter (Optional) 2-27

External I/O Terminal Block Connectors 2-27

I/O Interface Connector – (15 Connector HDB-Sub) 2-27

Signal Distribution Terminal Block 2-28

Field I/O Wiring Examples 2-30

Input Opto Wiring 2-30

Output Opto Wiring 2-31

TTL I/O Wiring 2-33

External I/O Terminal Block Adapter Cable (Optional) 2-34

External Strobe & Sensor 2-36

Serial Connector & Serial Adapter Cable 2-39

Ethernet 2-41

Power & Ethernet LEDs 2-42

Mode/Status LEDs 2-43

Verification LEDs 2-44

Beeper 2-44

QuicSet® 2-44

Front Panel HawkEye™ 1510 2-45

Light Port Connector 2-45

Contents

v2.4.1, Nov 2008 HawkEye™ 1500 Series User Manual vii

Mounting Blocks 2-47

Optional Location for Mounting Block 2-47

CHAPTER 3 HawkEye™ 1500 Series Overview 3-1

Unique Camera Names 3-3

Application Modes 3-3

Demo 3-3

Motion 3-4

Stop and Scan 3-4

Supermarket 3-4

Lighting Modes 3-4

Retry Modes 3-6

Time 3-7

Count 3-7

GPIO IN 4 Duration 3-7

ISWT (Inter-Symbol Wait) 3-8

PID List 3-9

PID List w/Acquire 3-10

Light 3-10

HawkEye™ 1500 I/O Operations 3-10

Trigger Behavior 3-10

Trigger Diagrams 3-11

Trigger Diagram 1 3-12

Trigger Diagram 2 3-13

Trigger Diagram 3 3-14

Trigger Diagram 4 3-15

Trigger Diagram 5 3-16

Trigger Diagram 6 3-17

Triggering the Unit (Inputs) 3-17

Physical Triggers 3-18

Virtual Triggers 3-18

Additional Physical Triggers Available 3-19

Outputs 3-19

Data Valid — Pipelined 3-20

Pass/Fail Only — Pipelined 3-21

Data Valid — Full Handshake 3-22

Pass/Fail Only — Full Handshake 3-24

DV - 2 Line Verify — Full HS 3-25

DV - 3 Line Verify — Full HS 3-26

Contents

viii HawkEye™ 1500 Series User Manual v2.4.1, Nov 2008

DV - 2 Line Verify — Pulse 3-28

DV - 3 Line Verify — Pulse 3-29

Formatted Output & Audio 3-31

Reported Error Codes 3-32

QuicSet® Symbol Photometry 3-35

CHAPTER 4 ReadRunner 4-1

Setting Up Communications 4-1

Overview 4-1

ReadRunner Menus 4-2

ReadRunner Shortcut Keys 4-4

ReadRunner Buttons 4-5

Setting Up Your Application 4-7

Adding & Taking Control of a Camera 4-7

Adding a Camera That is on a Different Subnet 4-11

Using Live Video to Align the Camera 4-12

Using Learn During Image Optimization 4-14

Displaying Camera Report Information 4-15

Resetting Camera Report Statistics 4-18

Saving & Loading Configuration Files 4-18

Saving Configuration Files 4-19

Loading Configuration Files 4-20

Releasing Control of a Camera 4-21

Removing a Camera 4-21

Using ReadRunner 4-22

Setting Up Photometry 4-22

Preprocessing Images 4-24

Setting Up Symbology 4-25

Defining the Region of Interest 4-26

Copying Current to PID 4-28

Copying PID to Current 4-28

Setting Up Text Matching 4-29

Match List Triggered I/O 4-31

Behavior of the Wildcard Match 4-40

Setting Up Serial Number Matching 4-41

Specifying... 4-44

Preferences 4-44

Application Modes 4-46

Lighting 4-48

Contents

v2.4.1, Nov 2008 HawkEye™ 1500 Series User Manual ix

Retry Modes 4-49

Extended PID List 4-51

Read Timeout 4-52

Report Budget 4-52

Triggers 4-53

Advanced I/O 4-54

Supported Keyword Names 4-59

Supported Behaviors 4-61

Serial/TCP Settings 4-64

Ethernet/IP Connectivity 4-67

Output Format Strings 4-71

Format String Keywords 4-77

Keyword Example 4-82

Toggling the Target Laser 4-86

Toggling the Beeper 4-87

Controlling the Beep 4-88

Saving Parameters on the Camera to Flash 4-89

Restoring Defaults 4-89

Decoder 4-89

Application Mode 4-89

Decoder & Application Mode 4-90

Displaying... 4-90

Verification Report 4-90

Reports & Images Over A Serial Connection 4-91

Commands Sent To and Output From the Camera 4-91

Programming User Buttons 4-92

Sending Remote Commands to the Camera 4-94

Timing & Rate Information 4-94

Information About Cameras on the Network 4-96

ReadRunner Version Number 4-98

Fine Tuning & Monitoring Your Application 4-100

Selecting Symbologies (1D or 2D) 4-100

Camera Resolution and Pixels 4-100

Learning & Unlearning 4-101

Enabling Assisted Learn 4-103

Unlearning 4-103

Modifying Decoding Parameters 4-104

Data Matrix Parameters 4-104

Barcode Parameters 4-109

Expert Settings 4-113

Data Matrix Fine Tune 4-115

BC412 Parameters 4-116

QR Code Parameters 4-117

Contents

xHawkEye™ 1500 Series User Manual v2.4.1, Nov 2008

Code 39 Parameters 4-118

I2of5 Parameters 4-119

UPC Parameters 4-119

Debugging Images 4-120

Configuring the Part Queue 4-120

Uploading Images Using QueueView 4-126

Saving Images to the PC Using QueueView 4-128

Saving the Current Image 4-129

Loading Image Files to the Camera 4-129

Returning the Camera to Acquisition 4-130

The Filmstrip Recorder 4-131

CHAPTER 5 Reading Difficult Symbols 5-1

General Reading Guidelines 5-1

Further Explanation 5-1

Preprocessing with Morphology 5-2

Erode Example 5-3

Dilate Example 5-4

Reading Different Difficult Symbols 5-5

CHAPTER 6 The Bootloader 6-1

Diagnostic Levels 6-1

Diagnostic Monitor 6-1

Boot Loader Power-On Self-Tests 6-3

Hard Error 6-3

Bootloader Menu 6-3

d — Dump Memory 6-4

Syntax 6-4

m — Modify Memory 6-5

Syntax 6-5

dt — Display Test Menu 6-5

Syntax 6-5

et — Execute Test 6-6

Syntax 6-6

dbp — Display Boot Parameters 6-6

Syntax 6-6

mbp — Modify Boot Parameters 6-7

Standalone Mode 6-7

Autres manuels pour HawkEye 1500 Series

Table des matières

Autres manuels Microscan Caméra de sécurité

Microscan

Microscan Vision HAWK Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur