Doc#: startc2003op.9/26/02.qx
REMOTE CONTROL OpERATION:
1. Unlock / Disarm Button
2. Lock / Arm / Panic Button
3. Time Display
4. Ignition Switch Input Indicator
5. Mode Button
6. Lock / Unlock Status Indicator
7. Stage 2 Instant Shock Trigger
8. Door / Shock Sensor Response
LCD TRANSMITTER FUNCTION SET UP:
* Selecting Vehicle 1 or Vehicle 2 Control:
Press & hold the “MODE” button for two seconds to prompt the “1” icon.
Press & hold the “MODE” button again to prompt the “2” icon.
The icon shown either “1” or “2” - lets the user know which vehicle they are set to control.
* Set Time and Beep:
Press & release the “MODE” button five times
The “AM” or “PM” icon will start to flash. You are now in set-up mode.
When in set-up mode, refer to the Quick Reference Guide for remote button layout.
STARTC2003-TW
FM/FM 2-WAY REMOTE
Button Description
LOCK To choose either “AM” or “PM” or increase (+) time numeral
UNLOCK To choose either “AM” or “PM” or decrease (-) time numeral
START Cycles through the positions to adjust: “AM/PM” - “Hour” - “Minute”
SILENT To choose either “BEEP” On/Off, or “Silent/Vibrate” On/Off
MODE Press once to exit set-up mode or wait seven seconds for automatic exit
9. Transmit / Receiver Indicator
10. Valet Mode Status Indicator
11. Low Battery Indicator
12. Siren Status Indicator
13. Stage 1 Prewarn Shock Trigger
14. Trunk / Hood Indicator
15. AUX Button
16. Engine Start Button
