2. Place the popcorn popper lid (A) and cover (B) onto the appliance base
3. Place the measuring cup lid / butter tray onto the lid assembly. CAUTION. Do not
operate without the lid assembly and measuring cup lid installed
4. Place a heat proof bowl in front of the popcorn chute. If a metal bowl is used it may
get hot but it will however keep the popcorn hotter for longer
5. Connect to the mains supply and switch power on. The appliance will heat the
popcorn using hot air and when cooked the popcorn will be expelled into the bowl.
6. Whilst the appliance is operating butter can be melted in the measuring cup
lid/butter tray. For best results cut into small cubes. Do not fill measuring cup
lid/butter tray with more than ¼ cup of butter
7. When popping is complete switch appliance off and disconnect power.
8. Pour melted butter into the bowl, mix and serve.
Tips
Do not operate appliance without popcorn
Only use regular or premium popcorn. Do not use microwavable popcorn
Never add oils, fats, shortening, sugar or salt to the heating chamber.
Allow popcorn to completely finish popping before removing the lid
Due to variances in popcorn type, freshness and moisture content some may
remain inside the appliance when finished. This is normal.
Use oven gloves or similar when handling hot surfaces.
Allow the appliance to cool before any second batch.
Warning – Hot parts!
Do not touch hot parts. Always allow to cool completely before touching. Use oven
gloves or similar
Continuous use
This appliance is not designed for continuous usage over long periods. After each use
allow the appliance to cool down before re use. Long periods of continuous use may
overheat the motor.
