Mi-Light FUT006 Manuel utilisateur

● To dim all dual white lights at once or change the color temperature, first press ‘Master ON’.

● To do this with individual lights, first press ‘ Zone ON’. Second, set the adjustment for color

temperature or brightness.

● To turn on the night light mode of a single ( dual white ) light, press and hold the ‘Zone OFF’ from

one of the 4 Zones.

● To turn on all the lights in night light mode, press and hold ‘Master OFF’.

● For remote control FUT006, the default mode is to adjust the brightness, rotating the wheel from left

to right, brightness up, from right to left, brightness down. Switching to adjusting the color

temperature by pressing the middle button once, left to right, cooler, right to left, warmer.

Color Temperature Remote Control

Model No.: FUT006 / FUT007

FUT007

FUT006

Features

This manual describes two types of remote controls with same functions. Adopt world-wide

used 2.4GHz frequency, GFSK control method, with the features of low power consumption,

long distance transmitting, strong anti-interference and fast communication rate. Can control

specified Mi-Light / MiBoxer smart light with color temperature and brightness changing.

Parameters

Product Name: Color Temperature Remote Control

(Full Button)

Model No.: FUT007

Voltage: 3V(AAA * 2PCS)

Transmission Frequency: 2.4GHz

Modulation Method: GFSK

Transmitting Power: 6dBm

Standby Power Consumption: 5uA

Control Distance: 30m

Size: 53*21*110.5mm

Product Name: Color Temperature Remote Control

(

Rotating Wheel)

Model No.: FUT006

Voltage: 3V(AAA * 2PCS)

Transmission Frequency: 2.4GHz

Modulation Method: GFSK

Transmitting Power: 6dBm

Standby Power Consumption: 20uA

Control Distance: 30m

Size: 53*21*110.5mm 21mm53mm

110.5mm

53mm

110.5mm

21mm

Products Key Diagram

Master ON

Master OFF

Brightness +

Brightness -

Cool white +Warm white +

Press once change to

color temperature

4x(un) Link light

Zone ON

Brightness

/ Color temperature

Zone OFF

Zone ON

Zone OFF

Made in China

Attention

1. This remote only control specified Mi-Light / MiBoxer products; not all Mi-Light / MiBoxer series

can work on this remote.

2. In the using of the remote, if the indicator light blinking quickly, pls change the battery in time.

Pls don’t use poor quality battery to avoid the leaking of battery liquid to damage the remote.

3. This 2.4G remote is precise electronic product; don’t use it in humid, high temperature, dust

and high voltage environment; Saving it at indoor, dry and no static electricity environment.

4. Pls don’t use the remote on the wide-range metal or strong electromagnetic wave area,

otherwise, it will badly affect the controlling distance.

You can add an endless numbers of lights to a zone on the 4 channel remote by linking the lights

to different zones. This way you are completely flexible in creating different group combinations.

Below you can see some grouping examples.

Grouping of several lights

Remark:

1. The user can re-programme freely as needed. One remote can control countless lights or

controllers, but one light or controller can only be controlled by four remotes ( Max ).

2. Please check the battery installation and controller ( totally discharge the power ), when you

programme after switching off and switching on.

When the light on, short press

any zone of " " 3 time within

3 seconds

Link Code

If the light not blink slowly, the linking failed, Pls switch off the light

again, and follow the above steps again.

Switch off the light,

after 10 seconds

switch on again

1 2 3

Power

The light blink 3 times

slowly means the linking

is done successfully.

Power

When the light on, short press

" " 5 times within 3 seconds

Unlinking must be the same

zone with the Linking

Unlink Code

If the light not blink quickly, the unlink failed, pls switch off the light

again, and follow the above steps to unlink again.

Switch off the light,

after 10 seconds

switch on again

1 2 3

Power

The light blinking 10

times quickly, means the

unlinking successfully.

Power

Link/Unlink

button

Link/Unlink

button

Link Code / Unlink Code

Remark: The light can be working after linking with the remote.

Ce manuel convient aux modèles suivants

Autres manuels Mi-Light Télécommande

Mi-Light

Mi-Light FUT095 RGBW Manuel utilisateur

Mi-Light

Mi-Light T1 Manuel utilisateur

Mi-Light

Mi-Light MiBOXER FUT094 Manuel utilisateur

Mi-Light

Mi-Light FUT088 Manuel utilisateur

Mi-Light

Mi-Light FUT087 Instructions d'installation

Mi-Light

Mi-Light Miboxer K2 Manuel utilisateur

Mi-Light

Mi-Light FUT090 Instructions d'installation

Mi-Light

Mi-Light MiBOXER FUT087 Manuel utilisateur

Mi-Light

Mi-Light LD1051371 Manuel utilisateur

Mi-Light

Mi-Light MiBOXER FUT086 Manuel utilisateur

Mi-Light

Mi-Light MiBOXER K3 Manuel utilisateur

Mi-Light

Mi-Light FUT006 Manuel utilisateur

Mi-Light

Mi-Light MiBOXER FUT086 Manuel utilisateur

Mi-Light

Mi-Light T1 Instructions d'installation

Mi-Light

Mi-Light MiBOXER FUT095 Manuel d'instructions

Mi-Light

Mi-Light FUT087 Instructions d'installation

Mi-Light

Mi-Light T1 Instructions d'installation

Mi-Light

Mi-Light FUT089 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation