3
3 Quick Start
The DSC internalpower supply is adjusted atthe factoryforanominal voltage corresponding totheelectrical
network of your country.
Install the DSC unit on a Hi-Fi rack or on a stable and strong support.
Do not install the unit directly on a carpet or flammable material.
Do not put any object on the top of the unit.
Before starting open the remote control (if provided) and insert the provided batteries.
A. Plug the ethernet cable.
B. Plug the analog outputs.
C. Plug the unit to the AC with the supplied power cord or compatible cord.
D. Start the unit with the main power switch, the touchscreen lights up.
Should it fail to operate:
- Turn off and unplug the unit.
- Check your power connection and network.
- Check the fuses.
- Start again the Quick Start procedure.
- If there is no difference, please contact Métronome Technologie Factory.
The touchscreen will be alight when the unit operates.
The powersupplycanbeswitchedonduringalongperiod.Betweenlisteningsessions,pleaseputthedeviceon
stand-by. For a prolonged absence, it is advised to switch it off and unplug the unit from the AC network.
The power supplyisprotectedbyinternalelectronic circuitsandbya generalfuselocatedintheblocknear the
maincordbesidetheswitch.Tochangethefuse,itismandatorytounplugthemainpowercablebeforeopening
the fuse compartment with ascrewdriver. Thenreplacethefusebythesamemodel:1A,temporisedfuse(eq.
slow burn). NEVER CHANGE THE FUSE VALUE.
