Metrologic Cubit IS6520 Series Manuel utilisateur

METROLOGIC INSTRUMENTS, INC.

IS6520/MS6520 Cubit®Series

Omnidirectional Bar Code Scanner

Installation and User’s Guide

LOCATIONS

CORPORATE HEADQUARTERS

NORTH AMERICA

EUROPEAN, MIDDLE EAST & AFRICAN

HEADQUARTERS

USA, NEW JERSEY GERMANY, MUNICH

Metrologic Instruments, Inc. Metrologic Instruments GmbH

Tel: 1-800-ID-METRO Fax: 856-228-6673 Tel: 49-89-89019-0 Fax: 49-89-89019-200

Email: i[email protected] Email: i[email protected]

SOUTH AMERICA, BRAZIL SÃO PAULO GERMANY, MUNICH

Metrologic do Brasil Ltda. Metrologic Instruments GmbH

Tel: 55-11-5182-8226 Fax: 55-11-5182-8315 Tel: 49-89-89019-0 Fax: 49-89-89019-200

Email: i[email protected] Email: i[email protected]

SOUTH AMERICA, OUTSIDE BRAZIL SÃO PAULO ITALY, BOLOGNA

Metrologic South America Metrologic Instruments Italia srl

Tel: 55-11-5182-7273 Fax: 55-11-5182-7198 Tel: +39 0 51 6511978 Fax: +39 0 51 6521337

Email: i[email protected] Email: i[email protected]

ASIA, SINGAPORE FRANCE, PARIS

Metrologic Asia (Pte) Ltd Metrologic Eria France SA

Tel: 65-6842-7155 Fax: 65-6842-7166 Tel: +33 (0) 1 48.63.78.78

Email: [email protected]ogic.com Fax: +33 (0) 1 48.63.24.94

Email: i[email protected]

CHINA, SUZHOU

Metro Technologies Co., Ltd. SPAIN, MADRID

Tel: 86-512-62572511 Fax: 86-512-62571517 Metrologic Eria Ibérica, SL

Email: [email protected]ogic.com Tel: +34 913 272 400 Fax: +34 913 273 829

Email: [email protected]

Metro Sales Office

Tel: 86-512-67622550 Fax: 86-512-67622560 Metrologic Europe Repair Center (MERC)

Email: i[email protected] Metrologic Eria Ibérica, SL

Tel: +34 913 751 249 Fax: +34 913 270 437

JAPAN, TOKYO

Metrologic Japan Co., Ltd. UNITED KINGDOM, BASINGSTOKE

Tel: 81-03-3839-8511 Fax: 81-03-3839-8519 Metrologic Instruments UK Limited

Email: [email protected]ogic.com Tel: +44 (0) 1256 365900

Fax: +44 (0) 1256 365955

Email: i[email protected]etrologic.com

RUSSIA, MOSCOW

Metrologic Russia

Tel: +7 095 730 7424 Fax: +7 095 730 7425

Email: i[email protected]

transmitted, or stored in any form or by any means without prior written consent, except by reviewer, who

may quote brief passages in a review, or provided for in the Copyright Act of 1976.

Products and brand names mentioned in this document are trademarks of their respective companies.

iii

TABLE OF CONTENTS

Introduction................................................................................................1

Scanner and Accessories..........................................................................2

Installation

RS232, Light Pen (IS6520-41/MS6520-41) ...........................................3

Keyboard Wedge (IS6520-47/MS6520-47)............................................4

Stand Alone Keyboard (IS6520-47/MS6520-47)....................................5

Disconnecting the PowerLink Cable from the Scanner.............................6

Scanner Parts............................................................................................7

Mounting Holes .........................................................................................7

Stands .......................................................................................................8

Audible Indicators......................................................................................9

Failure Modes..........................................................................................10

Visual Indicators ......................................................................................11

Programming Modes...............................................................................12

Labels......................................................................................................15

Maintenance............................................................................................15

Optimal Low and Close Depth of Field....................................................16

Optimal High and Normal Depth of Field ................................................17

Far Depth of Field....................................................................................18

Troubleshooting Guide ............................................................................19

Appendix A

Design Specifications...........................................................................23

Appendix B

Default Settings....................................................................................25

TABLE OF CONTENTS

Appendix C

Scanner Pinout Connections ...............................................................29

Cable Connector Configurations..........................................................29

Appendix D

Warranty and Disclaimer .....................................................................31

Appendix E

Notices .................................................................................................32

Appendix F

Patents.................................................................................................34

Index........................................................................................................35

INTRODUCTION

Metrologic's Cubit®Series of compact omnidirectional bar code scanners

includes the MS6520 for retail applications and the IS6520 for OEM applications.

Both Cubit models have several key product features including:

•Fully Automatic Scanning Operation

•Single Cable Interface To Host

•PowerLink Quick Disconnect User-Replaceable Cables

•7 Beeper Tones

•Programmable Depth Of Fields

•Capable Of Scanning And Decoding All Standard Barcodes Including

Rss-14, RSS Limited And RSS Expanded Bar Codes

•OPOS And JPOS System Compatible

•Sunrise 2005 Compliant

The MS6520 is equipped with a tilt stand that can be mounted securely to the

countertop or wall for fixed -mount scanning. The multi-position stand has a

locking design that rotates the head of the MS6520 up to 64° making it perfect

for installation underneath check writing and credit card stands.

Since the IS6520 was designed to be part of an OEM product, it does not

include the tilt stand but instead is equipped with three (3) threaded mounting

holes on the back of the unit. The modular design of the IS6520 is versatile

enough for integration into a diversity of applications including kiosks, reverse

vending machines, time/attendance machines and price look-up systems.

A fixed vertical stand is also available for additional purchase. Please contact a

customer service representation at 1-800-ID-METRO for information.

SCANNER INTERFACE

IS6520-41

MS6520-41

Full RS232 and Light Pen Emulation

IS6520-47

MS6520-47

Keyboard Wedge, Stand Alone Keyboard and

RS232 Transmit/Receive

SCANNER AND ACCESSORIES

BASIC KIT COMPONENTS

Part No. Description

IS6520/MS6520 Cubit®Omnidirectional Scanning Engine

00-02421 Installation and User’s Guide*

00-02407 MetroSelect®Configuration Guide*

*Available for download on Metrologic’s website, www.metrologic.com.

OPTIONAL ACCESSORIES

Part No. Description

AC to DC Power Transformer – Regulated 5.2VDC @ 650 mA output.

45-45593 120V United States

45-45591 220V-240V Continental European

45-45992 220V-240V United Kingdom

46-46803 220V-240V Australia

46-46983 220V-240V China

xxx - specifies connection to the host

53-53xxx PowerLink cable with built in power jack

2.7m (9’) coiled cord, long strain relief

54-54xxx PowerLink cable with built in power jack

2.1m (7’) straight cord, short strain relief

54-54002 Keyboard Wedge PowerLink cable and Adapter Cable

54-54020 Stand Alone Keyboard PowerLink Cable

46-46486 Tilt Stand

46-46145 Fixed Vertical Stand

To order additional items, contact the dealer, distributor or call Metrologic's

Customer Service Department at 1-800-ID-METRO (1-800-436-3876).

INSTALLATION

RS232, Light Pen (IS6520-41/MS6520-41)

1. Turn off the host device.

2. Plug the male 10-pin RJ45 end of the

PowerLink cable into the 10-pin socket

on Cubit. You will hear a ‘click’ when

the connection is made.

3. Connect the 9-pin female end of the

PowerLink cable to the host device.

Note: Skip to step 6 if receiving power

from the host device.

4. Plug the external power supply into the

power jack on the PowerLink cable.

Check the AC input requirements

of the power supply to make sure

the voltage matches the AC

outlet. The outlet must be

located near the equipment and

be easily accessible.

5. Connect AC power to the transformer.

6. Turn on the host device.

Plugging the scanner into a port on the host system does not

guarantee that scanned information will be communicated properly to

the host system. The scanner is shipped from the factory configured

to a set of default parameters. Please refer to the MetroSelect

Configuration Guide (MLPN 00-02407) for instructions on changing the

scanner’s configuration. In addition, please check that the scanner

and host system are using the same communication protocol.

Caution:

To maintain compliance with applicable standards, all circuits connected to the scanner

must meet the requirements for SELV (Safety Extra Low Voltage) according to EN 60950.

To maintain compliance with standard CSA C22.2 No. 950/UL 1950 and norm EN 60950,

the power source should meet applicable performance requirements for a limited power

source.

INSTALLATION

Keyboard Wedge (IS6520-47/MS6520-47)

1. Turn off the host device.

2. Plug the male 10-pin RJ45 end of the

PowerLink cable into the 10-pin socket

on Cubit. You will hear a ‘click’ when

the connection is made.

3. Disconnect the keyboard from the host

device.

4. Connect the “Y” end of the PowerLink

cable to the keyboard and the keyboard

port on the host device. If necessary

use the male/female adapter cable

supplied with the scanner to make the

proper connections.

5. Plug the external power supply into the

power jack on the PowerLink cable.

Check the AC input requirements

of the power supply to make sure

the voltage matches the AC

outlet. The outlet must be

located near the equipment and

be easily accessible.

6. Connect AC power to the transformer.

7. Turn on the host device.

Powering the Cubit directly from the host device can sometimes

cause interference with the operation of the scanner or the computer.

Not all computers supply the same current through the keyboard port.

For this reason, Metrologic recommends using an external power

supply. For additional information contact a Metrologic customer

service representative.

Caution:

To maintain compliance with applicable standards, all circuits connected to the scanner

must meet the requirements for SELV (Safety Extra Low Voltage) according to EN 60950.

To maintain compliance with standard CSA C22.2 No. 950/UL 1950 and norm EN 60950,

the power source should meet applicable performance requirements for a limited power

source.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Metrologic Lecteur de codes-barres

Metrologic

Metrologic MS6200 Pulsar Series Manuel utilisateur

Metrologic

Metrologic MS7120 Orbit Manuel utilisateur

Metrologic

Metrologic MS9530 Series Manuel utilisateur

Metrologic

Metrologic Eclipse MS5145 Manuel utilisateur

Metrologic

Metrologic StratosS MS2222 Manuel utilisateur

Metrologic

Metrologic StratosS MS2220 Manuel utilisateur

Metrologic

Metrologic IS3480 QuantumE Manuel utilisateur

Metrologic

Metrologic MS7820 Solaris Manuel utilisateur

Metrologic

Metrologic MK1650-62B14 - Metrologic IS1650 - Wired Stationary Barcode... Manuel utilisateur

Metrologic

Metrologic MS9530 Series Manuel utilisateur

Metrologic

Metrologic MS 1690 Focus Series Manuel utilisateur

Metrologic

Metrologic MS7320 InVista Series Manuel utilisateur

Metrologic

Metrologic MS1890 Focus Manuel utilisateur

Metrologic

Metrologic MS 1690 Focus Series Manuel utilisateur

Metrologic

Metrologic IS3480 QuantumE Manuel utilisateur

Metrologic

Metrologic Stratos MS2422 Manuel utilisateur

Metrologic

Metrologic MS7620 Manuel utilisateur

Metrologic

Metrologic MS1633 FocusBT Manuel utilisateur

Metrologic

Metrologic MS7320 InVista Series Manuel utilisateur

Metrologic

Metrologic MS1633 FocusBT Manuel utilisateur

Metrologic

Metrologic MS5100 Eclipse Series Manuel utilisateur

Metrologic

Metrologic MS7120 Orbit Manuel utilisateur

Metrologic

Metrologic MS6720 Manuel utilisateur

Metrologic

Metrologic MS9530 Series Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur