Metrohm Inline Ultrafiltration 2 Manuel utilisateur

IC equipment

IC equipment: Inline Ultrafiltration 2 - push mode

Manual

8.0108.8026EN/2020-05-22

Metrohm AG

CH-9100 Herisau

Switzerland

Phone +41 71 353 85 85

Fax +41 71 353 89 01

[email protected]

www.metrohm.com

IC equipment

IC equipment: Inline Ultrafiltration 2

- push mode

6.05330.110

Manual

8.0108.8026EN/2020-05-22

Technical Communication

Metrohm AG

CH-9100 Herisau

[email protected]

This documentation has been prepared with great care. However, errors

can never be entirely ruled out. Please send comments regarding possible

errors to the address above.

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ Table of contents

IC equipment: Inline Ultrafiltration 2 - push mode ￭￭￭￭￭￭￭￭ III

Table of contents

1 Introduction 1

1.1 Description of the IC equipment: Inline Ultrafiltration 2

- push mode .......................................................................... 1

1.2 About the documentation ................................................... 1

1.3 Symbols and conventions .................................................... 2

2 Mode of operation of ultrafiltration 3

2.1 Mode of operation of the push mode ............................... 3

2.2 Mode of operation of the pull mode ................................. 3

2.3 Sample volume ...................................................................... 4

3 Overview 5

3.1 Parts of the IC equipment: Inline Ultrafiltration 2 - push

mode ...................................................................................... 5

3.2 Flow diagram of the IC equipment: Inline Ultrafiltration

2 - push mode ....................................................................... 7

3.3 Components of the ultrafiltration cell ................................ 8

3.4 Connectors of the ultrafiltration cell ................................... 9

4 Installation 10

4.1 Preparing the ultrafiltration cell ........................................ 10

4.2 Connecting the ultrafiltration cell ..................................... 14

4.3 Inserting the ultrafiltration cell ......................................... 17

4.4 Purging the ultrafiltration cell ........................................... 18

5 Operation 19

5.1 Ultrafiltration time and sample volume ............................ 19

5.2 Selecting the filtration membrane .................................... 19

6 Maintenance 21

6.1 Service life of the filtration membrane ............................. 21

6.2 Replacing the filtration membrane ................................... 22

7 Technical specifications 24

7.1 Ultrafiltration cell 2 (6.02729.110) ................................... 24

7.2 Filtration membrane 1 (6.2714.020) ................................. 24

Table of contents ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

IV ￭￭￭￭￭￭￭￭ IC equipment: Inline Ultrafiltration 2 - push mode

8 Accessories 25

Index 26

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ Table of figures

IC equipment: Inline Ultrafiltration 2 - push mode ￭￭￭￭￭￭￭￭ V

Table of figures

Figure 1 IC equipment: Inline Ultrafiltration 2 - push mode – Parts .................. 5

Figure 2 Flow diagram of the IC equipment: Inline Ultrafiltration 2 - push

mode ................................................................................................ 7

Figure 3 Ultrafiltration cell – Parts .................................................................... 8

Figure 4 Ultrafiltration cell – Connectors ......................................................... 9

Figure 5 push mode – Connecting the ultrafiltration cell ................................ 14

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 Introduction

IC equipment: Inline Ultrafiltration 2 - push mode ￭￭￭￭￭￭￭￭ 1

1 Introduction

1.1 Description of the IC equipment: Inline Ultrafiltra-

tion 2 - push mode

The IC equipment: Inline Ultrafiltration 2 - push mode (6.05330.110) con-

tains all accessories required for Inline Ultrafiltration directly before injec-

tion.

The main component of the IC equipment: Inline Ultrafiltration 2 - push

mode is the ultrafiltration cell. This cell is suitable for the filtration of sam-

ples with high requirements regarding filtration effectiveness and sample

throughput.

2 peristaltic pumps are needed in addition to the IC equipment: Inline

Ultrafiltration 2 - push mode for pumping the sample and the filtrate.

1.2 About the documentation

This manual describes the correct assembly and maintenance of the IC

equipment: Inline Ultrafiltration 2 - push mode, the installation of the

capillary connections and the assembly of the holder to the sample

changer.

The installation of the peristaltic pump is not described in this manual. The

installation of the peristaltic pump is described in the respective manuals

for the ion chromatograph or for the sample changer.

CAUTION

Please read through this documentation carefully before putting the IC

equipment: Inline Ultrafiltration 2 - push mode into operation. The doc-

umentation contains information and warnings which the user must

follow in order to ensure safe operation of the IC equipment: Inline

Ultrafiltration 2 - push mode.

1.3 Symbols and conventions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

2￭￭￭￭￭￭￭￭ IC equipment: Inline Ultrafiltration 2 - push mode

1.3 Symbols and conventions

The following symbols and formatting may appear in this documentation:

Cross-reference to figure legend

The first number refers to the figure number, the sec-

ond to the instrument part in the figure.

Instruction step

Carry out these steps in the sequence shown.

Method Dialog text, parameter in the software

File ▶ New Menu or menu item

[Next] Button or key

WARNING

This symbol draws attention to a possible life-threat-

ening hazard or risk of injury.

WARNING

This symbol draws attention to a possible hazard due

to electrical current.

WARNING

This symbol draws attention to a possible hazard due

to heat or hot instrument parts.

WARNING

This symbol draws attention to a possible biological

hazard.

CAUTION

This symbol draws attention to possible damage to

instruments or instrument parts.

NOTE

This symbol highlights additional information and

tips.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Metrohm Équipement de laboratoire

Metrohm

Metrohm 843 Manuel utilisateur

Metrohm

Metrohm 889 Manuel utilisateur

Metrohm

Metrohm 940 Professional IC Vario ONE/ChS/LPG Manuel utilisateur

Metrohm

Metrohm Autolab RDE2 Manuel utilisateur

Metrohm

Metrohm OMNIS Manuel utilisateur

Metrohm

Metrohm 885 Compact Oven SC Manuel utilisateur

Metrohm

Metrohm 942 Extension Module Vario LQH Manuel utilisateur

Metrohm

Metrohm 940 Professional IC Vario ONE/ChS Manuel utilisateur

Metrohm

Metrohm 774 Manuel utilisateur

Metrohm

Metrohm 776 Dosimat Manuel utilisateur

Metrohm

Metrohm 751 GPD Titrino Manuel utilisateur

Metrohm

Metrohm 884 Professional VA Manuel utilisateur

Metrohm

Metrohm 874 Manuel utilisateur

Metrohm

Metrohm 838 Advanced Sample Processor Manuel d'utilisation et d'entretien

Metrohm

Metrohm 930 Compact IC Flex SeS/PP Manuel utilisateur

Metrohm

Metrohm OMNIS 6.03004.210 Manuel utilisateur

Metrohm

Metrohm 802 Stirrer Manuel utilisateur

Metrohm

Metrohm 917 Coulometer Manuel utilisateur

Metrohm

Metrohm Titrino 784 KFP Manuel utilisateur

Metrohm

Metrohm 942 Extension Module Vario ChS-PP Manuel utilisateur

Metrohm

Metrohm 848 Titrino plus Manuel utilisateur

Metrohm

Metrohm 917 Coulometer Instructions de fonctionnement

Metrohm

Metrohm 873 Biodiesel Rancimat Manuel utilisateur

Metrohm

Metrohm 930 Compact IC Flex Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur