Portable Aluminum Gantry Crane
Operation & Maintenance Instructions
Document No. TD005-0618
Last Updated: 21 June 2018
MOVING THE GANTRY UNDER LOAD
Under certain circumstances it is possible to use the gantry to transport the load. This should ONLY be carried out
if the ground towards the destination is level, sound surface and two or more people are present.
We would also advise that you follow this procedure when moving the gantry.
1. With Castor Brakes engaged, raise the load to just above ground level (Max. 6” clearance)
2. Secure the trolley and load to one end of the A-Frame
3. Release Castor Brakes
4. From the other end, drag the gantry slowly to your destination point
5. Engage Castor Brakes
6. You can now untie the load and reuse as required
MAINTENANCE INSTRUCTIONS
To ensure the safe operation of your gantry, periodically inspect it for bent, broken, damaged, corroded, cracked or
missing parts.
If replacements part are required, please supply the complete gantry model and serial number both of which can
be found on the aluminum plate fixed to one of the A-Frame bases. Please also identify from the parts list drawing
(page 11) which item is required.
The only item which requires regular maintenance is to check the tightness of bolts and to lubricate the casters
through the grease nipple provided.
Should the Castors require lubrication we recommend NLGI No. 1 or No. 2 grease to be used.
Safety instruction labels and part identification codes should be in a legible condition at all times. If these become
lost or damaged we would recommend that you contact your supplier and request new labels.
