METHVEN Deva IND104 Manuel utilisateur

Indi Sink Mixer

IND104

Installation Guide

Technical Specification

Working Pressure:

Min:

Max:

Operating Temperature:

Hot:

Cold:

0.3 Bar

5.0 Bar

65⁰C

5⁰C

METHVEN UK LIMITED

METHVEN EXPERIENCE CENTRE

3/3A STONE CROSS COURT

YEW TREE WAY

GOLBORNE

WARRINGTON

WA3 3JD

UNITED KINGDOM

INST-IND104

02.03.2020

TEL: 0800 195 1602

FAX: 0844 406 8690

EMAIL: [email protected]

www.deva-uk.com

www.methven.com

Warranty Information

Proof of purchase will be required.

The guarantee does not cover faults or damage caused by incorrect

installation and/or maintenance, ordinary wear and tear, water

composition, etc.

*Please see www.deva-uk for full terms and conditions of warranty

Cleaning

Your product has a high-quality finish and should be treated with care

to preserve the visible surfaces. Never use abrasives or abrasive

cleaning agents to clean this product clean regularly with

contamination free warm water and a damp soft cloth. Do not use

products containing chlorine bleach or hydrochloric acid as these can

damage the product.

We have a policy of continuous improvement and reserve the right to

change specifications without notice.

Inlet Connections:

½" BSP

Features:

•Swivel spout

•Ceramic Cartridge

•Tilt and Turn Temperature and Flow

Control

Contents

Congratulations on your purchase of your new Deva by Methven Sink Mixer.

Our fitting instructions have been created with you in mind to provide you

with all the information you require and, if you need any further help, please

don't hesitate to contact our customer care team on 0800 195 1602.

General Safety Information

Line Drawing

Product Breakdown

Installation Requirements

Installation

Troubleshooting

Warranty Information

Cleaning

Troubleshooting

Please keep these instructions for future reference and request of replacement

parts

General Safety Information

Please read all of the instructions before installation.

Methven recommends this product is installed by a competent person in

compliance with all relevant regional regulations.

Remove all packaging and check the components for damage before starting

installation.

This product must not be modified in any way as this will invalidate the guarantee.

It is the responsibility of the installer to ensure a waterproof seal is achieved, after

installation all connections must be checked for leaks.

All outlets used primarily for personal hygiene shall deliver water at a safe

temperature as per regional regulations.

Line Drawing

Installation Requirements

Before commencing installation of the new product, ensure that the system has

been flushed to remove any debris, which could cause damage to the valves and

invalidate the warranty.

Installation

1, Screw the threaded fixing bolt into the bottom of the mixer body

2, Screw both Flexi Tails into the tap body, ensuring that the O-Ring on the

tail is positioned inside the tap body. Hand tighten, do not use PTFE tape or

similar to create the seal.

3, Offer the tap up to the hole in the sink

4, On the underside of the sink fit the

rubber and metal horseshoe shaped

washers onto the threaded fixing bolt and

using the nut provided tighten until the

tap is secure in the mounting hole.

Note: Plastic Triangle - If required a under

sink mounting triangle can be purchased,

this should be used on thin work surfaces

to help distribute the weight of the tap

and provide a thicker mounting surface

for the fixing kit to clamp to.

5, Connect the male end of the tail to the

corresponding hot and cold inlets.

6, Reinstate water supply and test for

leaks.

Product Breakdown

Check All components are present prior to starting installation.

Autres manuels METHVEN Équipements de cuisine et de salle de bain

METHVEN

METHVEN Deva Vision VSN104 Manuel utilisateur

METHVEN

METHVEN Waipori 01-8185 Manuel utilisateur

METHVEN

METHVEN AURAJET Manuel utilisateur

METHVEN

METHVEN Kaha 113 Manuel utilisateur

METHVEN

METHVEN MAKU BASIN MIXER Manuel utilisateur

METHVEN

METHVEN Aroha 01-9106 Manuel utilisateur

METHVEN

METHVEN FLEXISPRAY Manuel utilisateur

METHVEN

METHVEN AIO Manuel utilisateur

METHVEN

METHVEN KAHA 3 Manuel utilisateur

METHVEN

METHVEN Kiri 113 Manuel utilisateur

METHVEN

METHVEN SURFACE BASIN MIXER Manuel utilisateur

METHVEN

METHVEN AIO BASIN MIXER Manuel utilisateur

METHVEN

METHVEN 01-8444 Manuel utilisateur

METHVEN

METHVEN MINIMALIST MK2 Manuel utilisateur

METHVEN

METHVEN SATINJET Manuel utilisateur

METHVEN

METHVEN 01-8123 Manuel utilisateur

METHVEN

METHVEN ROUND RAIL Manuel utilisateur

METHVEN

METHVEN Aio AOBCP Manuel utilisateur

METHVEN

METHVEN ALBSMCP Manuel utilisateur

METHVEN

METHVEN Gooseneck 01-2350 Manuel utilisateur

METHVEN

METHVEN Breeze BRBSMCPUK Manuel utilisateur

METHVEN

METHVEN WAIPORI 3 Manuel utilisateur

METHVEN

METHVEN Indra INBFCPUK Manuel utilisateur

METHVEN

METHVEN Futura 02-4308 Manuel utilisateur

Manuels Équipements de cuisine et de salle de bain populaires d'autres marques

Grohe

Grohe BRIDGEFORD 33 870 Manuel utilisateur

Hans Grohe

Hans Grohe Zenio Metro 31811000 Manuel utilisateur

Gröne

Gröne Zedra 32 555 Manuel utilisateur

Transform

Transform QL045 Manuel utilisateur

Sanela

Sanela SLU 09PTB Manuel utilisateur

Glacier bay

Glacier bay FP4A0052BNV Instructions de montage

Lefroy Brooks

Lefroy Brooks C1-1400 Instructions de montage

Grohe

Grohe Rapido E Manuel utilisateur

Danze

Danze D302455 Manuel utilisateur

Waterworks

Waterworks CEKM30 Feuille d'instructions

Helvex

Helvex Omega TV-298 Manuel utilisateur

Tribata.

Tribata. GEORGIAN G5393 Manuel utilisateur

Alpha Bidet

Alpha Bidet Alpha One Manuel utilisateur

InSinkErator

InSinkErator H/HC3300 Manuel d'installation

Clou

Clou Xo type 1 Manuel utilisateur

Kohler

Kohler Contra 26448T-4 Manuel utilisateur

Grohe

Grohe Bridgeford 20 158 Manuel utilisateur

Hans Grohe

Hans Grohe Croma Select S 180 Showerpipe EcoSmart... Manuel utilisateur