Merkury Innovations MI-EW012 Mode d’emploi

Can’t connect?

Need help?

CAN

HELP

DO NOT

RETURN THIS

PRODUCT TO

THE STORE

support.mygeeni.com

(888)232-3143 Toll-free

or tap ‘support‘ for help in the Geeni app.

SMART WI-FI

LED STRIP

START

GUIDE

MI-EW012_Manual_011521.indd Spread 1 of 12 - Pages(18, 1)MI-EW012_Manual_011521.indd Spread 1 of 12 - Pages(18, 1) 1/15/21 4:21 PM1/15/21 4:21 PM

Thank you for purchasing your MERKURY smart

home product.

Get started using your new devices by downloading

Geeni, one convenient app that manages everything

straight from your phone or tablet. Easily connect to

your home Wi-Fi, and control multiple devices from the

touch of your fingertips.

MI-EW012_Manual_011521.indd Spread 2 of 12 - Pages(2, 17)MI-EW012_Manual_011521.indd Spread 2 of 12 - Pages(2, 17) 1/15/21 4:21 PM1/15/21 4:21 PM

Download & Register

Prepare

Connect (Auto Discovery)

Connect (Manual Connection)

Questions, Troubleshooting, Notices

Contents

Start Guide

Google Assistant

Amazon Alexa

Voice Control Guide

MI-EW012_Manual_011521.indd Spread 3 of 12 - Pages(16, 3)MI-EW012_Manual_011521.indd Spread 3 of 12 - Pages(16, 3) 1/15/21 4:21 PM1/15/21 4:21 PM

FCC Notice:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modiﬁcations to this device not explicitly approved by

manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

The device can be used in portable exposure condition without restriction.

MI-EW012_Manual_011521.indd Spread 4 of 12 - Pages(4, 15)MI-EW012_Manual_011521.indd Spread 4 of 12 - Pages(4, 15) 1/15/21 4:21 PM1/15/21 4:21 PM

You can rename your devices in the Geeni app, and Alexa will refer to

them by the same name.

So if you rename a smart bulb to “Living Room“ or a nickname like

“Blossom,“ then Alexa will use that same name later on.

Alternatively, you can create an Alexa group, like “Bedroom“ or

“Downstairs,“ and add the device to the group.

Alexa will recognize the group name in the Alexa app, or the device name

in the Geeni app.

More information is available at:

http://tinyurl.com/alexa-smart-home-groups

Amazon Alexa

Choose “Discover

Devices.“ After

a few seconds

your MERKURY

devices will be

displayed under

Smart Home in

the Alexa app.

Authorize your

account with

Smart Home

Skills using the

username and

password from

your Geeni app.

Important Information:

The weather resistant IP65 rating only protects the LED strip from splashes in

any direction. DO NOT IMMERSE IN WATER.

WARNING: The LED strip must be unplugged when making any modifications

to the device. Electrical currents are dangerous and may cause electrical

shock, injury, or death (in some cases)

Support:

If you encounter any issues, please contact us at support.mygeeni.com for help.

To explore our full selection of products, visit us at: www.mygeeni.com

(888) 232-3143 Toll-free

The illustrated product and specifications may differ slightly from those

supplied. Geeni is a trademark of Merkury Innovations LLC. iPhone, Apple and

the Apple logo are trademarks of Apple Inc., registered in the U.S. and other

countries. App Store is a service mark of Apple Inc. Google, Google Play, and

related marks and logos are trademarks of Google LLC. iOS is a registered

trademark of Cisco in the U.S. and other countries and is used under license.

Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its

affiliates. All other trademarks and trade names are those of their respective

owners.

Made in China

MI-EW012_Manual_011521.indd Spread 5 of 12 - Pages(14, 5)MI-EW012_Manual_011521.indd Spread 5 of 12 - Pages(14, 5) 1/15/21 4:21 PM1/15/21 4:21 PM

Smart Wi-Fi

LED Strip

Anchor

Mounts

Wi-Fi

Controller

What’s in the Box

START

GUIDE

Get Ready

Know your Wi-Fi

network and password

Make sure you’re

connecting to a 2.4GHz

Wi-Fi network (Geeni

can’t connect to 5GHz

networks)

Make sure your mobile

device is running iOS®

9 or higher or Android™

5.0 or higher

2.4GHz

iOS 9 Android 5.0

Power

Adapter

User Manual

To control your MERKURY smart

bulbs, plugs or surge protectors,

just ask Alexa.

Make sure your devices are already

set up using the Geeni app.

“Alexa, discover my devices.“

“Alexa, turn on the bedroom light.“

“Alexa, set the bedroom light to orange.“

“Alexa, turn off the coffee machine.“

“Alexa, set the living room to 50%.“

“Alexa, dim porch light.“

*Some commands require compatible devices.

Things you can say*:

Open the Alexa

app and go to

Skills in the menu.

Search for Geeni

then tap Enable.

MI-EW012_Manual_011521.indd Spread 6 of 12 - Pages(6, 13)MI-EW012_Manual_011521.indd Spread 6 of 12 - Pages(6, 13) 1/15/21 4:21 PM1/15/21 4:21 PM

Authorize your

account with

Google Assistant

using the

username and

password from

your Geeni app.

Choose “Geeni“

from the list of

Home Control

partners.

Now your Google Home app and

MERKURY devices are linked!

You’re now able to say “Hey Google“

and control your MERKURY devices.

At any time, go into the “Home Control“ section of the Google Home

app to set nicknames and rooms for your devices. You can rename your

devices in the Geeni app, and Google Assistant will refer to them by the

same name.

So if you rename a smart bulb to “Living Room“ or a nickname like

“Blossom,“ then Google Assistant will use that same name later on. You

can always give it a nickname using the Google Home app as well. You can

also assign bulbs to a specific room, like “Bedroom“ or “Kitchen.“

Google Assistant will be able to control devices by room.

Google Assistant

STEP 1

Download the Geeni

App from App Store

or Google Play.

on your Geeni App.

01.

Enter your mobile

phone number or email

address

03.

02.

Enter the verification

code and create a

password.

Download & Register

MI-EW012_Manual_011521.indd Spread 7 of 12 - Pages(12, 1)MI-EW012_Manual_011521.indd Spread 7 of 12 - Pages(12, 1) 1/15/21 4:21 PM1/15/21 4:21 PM

01.

Plug the device into the wall.

Make sure the indicator light on the device is flashing

rapidly, indicating the device is ready to connect.

*See reset instructions on p. 5

Plug In

STEP 2

Prepare

03.

Measure the LED strip for the desired length, starting

at the end closest to the connector

for the Wi-Fi Controller.

IMPORTANT: If you measure & cut

from the opposite end, you will not be able to

connect the LED strip to the Wi-Fi Controller.

02.

Use the included anchor mounts to attach the LED

strip.

LED Input

LED Strip

Power Adapter

Wi-Fi Controller

Reset Button

Press: Turn On/Off

Press & Hold: Reset

“Hey Google, turn on all the lights in my bedroom.“

“Hey Google, turn off fan.“

“Hey Google, set the bedroom light to orange.“

“Hey Google, turn off the coffee machine.“

“Hey Google, set the living room to 50%.“

“Hey Google, dim porch light.“

Things you can say*:

*Some commands require compatible devices.

Open the Google

Home app and go

to Home Control

in the menu.

Tap the “+“ button.

To control your MERKURY smart

bulbs, plugs or surge protectors,

just say “OK Google,“ or “Hey

Google,“ and ask. Make sure your

devices are already set up using

the Geeni app.

MI-EW012_Manual_011521.indd Spread 8 of 12 - Pages(2, 11)MI-EW012_Manual_011521.indd Spread 8 of 12 - Pages(2, 11) 1/15/21 4:21 PM1/15/21 4:21 PM

Name and Control Each Device by Voice

VOICE

CONTROL

GUIDE

Thank you for purchasing your MERKURY smart home

product. Make sure your devices are already set up

using the Geeni app, then follow these steps.

Contents

Google Assistant

Amazon Alexa

Voice Control Guide

Prepare

Locate the closest cut mark to

your desired length.

Take a sharp pair of scissors or

blade, and cut along the cut mark.

*NOTE: If you trim the LED

strip, the cut end will no longer

be waterproof. If you are

installing this outside, it is NOT

recommended to trim the LED

strip.

*Dark lines along the strip indicate

areas where it’s safe to cut.

Installation Using Anchor Mounts

If you would like, you may utilize the included anchor

mounts. Each mount can be screwed into the wall with a

standard Phillips-head screwdriver (not included).

MI-EW012_Manual_011521.indd Spread 9 of 12 - Pages(10, 3)MI-EW012_Manual_011521.indd Spread 9 of 12 - Pages(10, 3) 1/15/21 4:21 PM1/15/21 4:21 PM

GOOD MORNING

03.

The geeni app will

automatically detect your

LED Strip using its

wireless Bluetooth

connection. Tap “Add Now”.

01.

Make sure:

Bluetooth is

turned on

Connect (Auto Discovery)

STEP 3

Set Up:

Method 1: Auto Discover Device

02.

While the device is flashing,

press in the Geeni app.

Your device is now able to be

discovered magically to connect

to your home Wi-Fi network. It’s

quicker and easier than ever to

connect.

Device is Flashing Connect to

2.4GHz Wi-Fi

Add Now

Troubleshooting

Reset the device

Cannot connect to your Wi-Fi network.

Make sure you entered the correct Wi-Fi password during the

Wi-Fi setup. Check whether there are any Internet connection

problems. If the Wi-Fi signal is too weak, reset your Wi-Fi

router and try again.

Reset the LED strip by pressing

& holding reset button until the LEDs blink slowly every 3

seconds. (If it’s blinking quickly or solid, reset it again)

System Requirements

Mobile device running iOS® 9 or higher or Android™ 5.0 or

higher

Existing Wi-Fi Network

Technical Specifications

• Size: 0.5in x 196.8in

• Input: 100-240V, 50/60Hz

• Life Span: 10000 Hours

• Weatherproof:

IP65 (Strip), IP65 (Controller)

• Wi-Fi: IEEE 802.11n, 2.4GHz

(Not compatible with 5GHz Wi-Fi networks)

Questions. Troubleshooting. Notices

MI-EW012_Manual_011521.indd Spread 10 of 12 - Pages(4, 9)MI-EW012_Manual_011521.indd Spread 10 of 12 - Pages(4, 9) 1/15/21 4:21 PM1/15/21 4:21 PM

Table des matières

Autres manuels Merkury Innovations Équipement d'éclairage

Merkury Innovations

Merkury Innovations MI-EW020-999W Mode d’emploi

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur