Mennekes AMAXX Manuel utilisateur

AMAXX®

Industrial data signal distributor

Addition to

installation & operating manual

Receptacle Combination

AMAXX®(01/03.2014)

Addition v01 / 02.2016

ENGLISH

1. About this document .......................................... 4

2. For your safety..................................................... 4

2.1 Target groups...................................................... 4

2.2 Intended use ....................................................... 4

2.3 Improper use ....................................................... 5

3. Device layout ....................................................... 6

4. Assembly and setting-up process....................... 7

4.1 Connecting the Schuko®sockets ......................... 7

4.2 Connecting the network cables ........................... 7

4.3 Earthing the device.............................................. 8

5. Operation ............................................................. 8

5.1 Opening the device ............................................. 8

5.2 Installing network devices.................................... 8

5.2.1 Installation space for network components .... 8

5.2.2 Securing and connecting the network device . 9

5.2.3 Connecting the Cepex data socket................. 9

5.3 Closing the device ............................................... 9

6. Cleaning................................................................ 9

7. Maintenance ........................................................ 9

8. Taking out of service and dismantling ............ 10

9. Faults .................................................................. 10

10. Storage and disposal......................................... 10

11. Technical data .................................................... 10

11.1 Name plate........................................................ 10

11.2 Device dimensions ............................................. 10

Table of contents

This document is an addition to the current installati-

on & operating manual for receptacle combination

AMAXX® (01/03.2014).

This addition includes instructions for using the data signal

distributor and is complete only together with the said

installation and operating manual.

This manual contains instructions that you have to observe

for your personal safety and to prevent injury or damage.

Apart from this manual, additional documentation (e.g.

manuals of device components) may be included that you

have to observe fully.

Keep this manual and additional documentation together

with the installation & operating manual for future refe-

rence.

Symbols used

This symbol identifies operations that only a quali-

fied electrician may carry out.

This symbol indicates an important note.

The triangle marks a prompt for action.

This symbol identifies a reference to another document.

2.1 Target groups

Contrary to the information in the installation &

operating manual for receptacle combination

AMAXX® (01/03.2014), all mentioned target

groups may open this device.

This applies in particular to electrical non-profes-

sionals, as opening is required for the installation

of network devices.

2.2 Intended use

The device on hand is an industrial data signal distributor

based on the receptacle combination AMAXX®.

You can accommodate and operate individual network

devices (e.g. switch, router, WLAN access point) in the data

signal distributor.

The unit is intended for permanent installation and for

indoor and outdoor use.

You need to read and follow the documentation supplied

as part of the product and keep it accessible at all times.

Apart from this manual, also follow the installation &

operating manual for receptacle combination AMAXX®

(01/03.2014) and any additional documentation (e.g.

manuals of device components).

The operator is responsible for the proper and safe use of

the device.

MENNEKES Elektrotechnik GmbH & Co. KG assumes no lia-

bility for the consequences of improper use.

Only a qualiﬁed electrician may carry out

the installation and connection to the power

supply.

1. About this document 2. For your safety

2.3 Improper use

Using the device is safe only when used as intended.

The following is inadmissible and must be avoided:

Disregarding the manual

Please read the manual before using the device.

Comply with described procedures and sequence of

work steps.

Carry out only those operations for which you have

received authorization.

Using a damaged device

Do not use a damaged device.

Have a qualified electrician repair the device.

Manipulation of the device

Besides installing and removing network components, do

not modify or convert the device.

Do not remove any parts of the device.

Do not use adapter plugs in conjunction with the device.

Use of unsuitable cleaning agents

Do not use aggressive detergents or chemicals for

cleaning since they may attack and damage surfaces.

Use of unauthorised spare parts and accessories

Use only spare parts and accessories that are

manufactured and / or approved by MENNEKES.

Use under unsuitable ambient conditions

Do not use the device in potentially explosive

atmospheres where flammable liquids, gases or dust are

present – explosion and fire risk.

Keep device away from heat sources.

Observe local regulations.

3. Device layout

1 Hinged enclosure top

2 Inspection window

3 Lockable Cepex data socket with RJ45 right angle connector

4 Fastening tab

5 AMAXX cable gland top (2 pieces) *

6 AMAXX cable gland bottom (1 piece) *

7 Bottom part of enclosure

8 Patch field with 8 slots (for RJ45 Keystones **)

9 Network component (e.g. switch, router, W-LAN access point) **

10 Hook and loop fastener (4 pieces) *

11 Mounting plate for network devices

12 Schuko® sockets (for connection network components)

13 Break-apart drainage opening

14 Captive enclosure screws (4 pieces)

15 Sealing point

16 Earth connection (bolt M6)

Included!

** Not i

ncluded!

= not illustrated

Only a qualified electrician may carry out the

installation and setting-up process!

Follow the installation & operating manual of "recepta-

cle combination AMAXX®(01/03.2014)" for installation

and setting-up process.

Follow also the documentation of the network device by

the device manufacturer.

In addition to the said installation & operating manu-

al, overserve the following instructions for the data

signal distributor.

4.1 Connecting the Schuko®sockets

Connecting the Schuko®sockets

Use a suitable tool to open the appropriate port of the

respective cable gland.

Install the supplied M20 cable gland (1) in the opening

provided on the enclosure.

Route the supply line (2) through the cable gland into the

enclosure.

Connect Schuko®sockets (3) and route the sheath of the

supply line into the enclosure of the sockets (supply line

1.5 - 2.5 mm2NYM).

Tighten the cable gland.

4.2 Connecting the network cables

Connecting the network cables

Install the supplied M40 cable gland (1) in the opening

provided on the enclosure. Install one or two cable

glands depending on the number of network cables (2).

The MENNEKES cable gland is suitable for using

several network cables.

Openings (A) not used must be

sealed with the included dummy

plug (B) to prevent penetration

of dirt and moisture.

Keep unused dummy plugs.

Route network cables through the cable gland into the

enclosure.

Tighten the cable gland.

Connect network cables to keystones and snap in the

patch field (3).

4. Assembly and setting-up

process

4.3 Earthing the device

Carry out additional earthing of the data signal

distributor required due to local circumstances

according to applicable regulations.

The distributor provides an earth connector for

this purpose (see illustration in Chapter 3, no. 16).

5. Operation

5.1 Opening the device

You have to open the device for installing network devices.

Opening the device

Open the upper part of the enclosure by turning the

casing screws (1) with a suitable tool.

Opening the device

Pull the enclosure cover (1) slightly forward and swing

open.

5.2 Installing network devices

The distributor provides mounting plates with cut-outs

where the network devices (e.g. switch, router, W-LAN

access point) can be secured with hook and loop fasteners.

This flexible mounting allows the use of varied network

devices.

When selecting network devices, you have to

consider the power loss and the permissible tem-

perature range of the devices.

Failure to comply may result in damages to the

device.

Please refer to the information on the name-

plate in data signal distributor.

Note the manufacturer information of the net-

work devices.

5.2.1 Installation space for network components

The installation space in the data signal distributor amounts to:

approx. 200mm x 265mm x 95mm (L x W x H)

The data signal distributor must close fully with

network devices installed.

5.2.2 Securing and connecting the network device

Securing and connecting the network device

Position the hook and loop fastener (1) depending on the

intended network device (2) horizontally or vertically on

the mounting plate (3).

For this purpose, feed the hook and loop fasteners

through the cut-outs behind the mounting plate.

Insert network device and secure with hook and loop

fasteners.

Check the network device for firm seating.

Plug the power supply of the network device into the

Schuko®socket.

Refer to the documentation of the network device's

manufacturer for setting-up process and operation.

5.2.3 Connecting the Cepex data socket

Connecting the Cepex data socket

Connect the patch cable (1) to the data socket (2).

5.3 Closing the device

Closing the device

Swing the enclosure cover for closing.

Tighten the casing screws (1) with a suitable tool.

6. Cleaning

Follow the installation & operating manual of "recepta-

cle combination AMAXX®(01/03.2014)" for cleaning.

7. Maintenance

Only a qualified electrician may carry out

maintenance!

Follow the installation & operating manual of "recep-

tacle combination AMAXX®(01/03.2014)" for mainte-

nance.

Only a qualified electrician may take the

device out of service and dismantle it!

Follow the installation & operating manual of "recepta-

cle combination AMAXX®(01/03.2014)" for taking out

of service and dismantling.

9. Faults

If a fault on a network device exists, please refer to the

documentation of the manufacturer.

A qualified electrician must check a fault on the data signal

distributor (e.g. a fault in the power supply).

10. Storage and disposal

Follow the installation & operating manual of "recepta-

cle combination AMAXX®(01/03.2014)" for storage and

disposal.

11. Technical data

11.1 Name plate

The data signal distributor has two nameplates:

1x on the outside of the enclosure; 1x inside the enclosure.

Name plate outside (example)

Item Explanation

1 Type / part number

2 Rated current (A)

3 Rated voltage

4 Frequency (Hz)

5 Back-up fuse (A)

6 Serial number

7 Protection class

8 Product standard

9 Manufacturing code

Name plate inside (example)

Item Explanation

1 Type / part number

2 Available power loss (W)

3 Design

4 Temperature (°C)

5 Protection class

6 Manufacturing code

11.2 Device dimensions

Note the device dimensions in the installation & ope-

rating manual of "receptacle combination AMAXX®

(01/03.2014)".

8. Taking out of service

and dismantling

Autres manuels pour AMAXX

Table des matières

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur