4, 5, 6, 7, 8 MPS
1, 2, 3 MPS
Adjusting the volume
Unit status LED
Adjusting the volume
Memcom
Memcom
Memcom
Memcom
24V DC
0V DC
Connections to the MPS unit
The unit volume can be adjusted using a small at head
screwdriver. Insert the screwdriver in the volume adjustor
on the back of the unit. Turn anti- clockwise to increase the
volume and clockwise to decrease the volume.
If feedback can be heard, reducing the volume may reduce or
remove the feedback.
Insert a small at head screw driver in the clamp section of the screw-less connector to open the clamp, insert the wire in
the hole and remove the screwdriver to clamp the wire in place secure the wire.
The status LED shows when the unit is correctly installed and also when an
alarm has been activated from the station, as detailed below:
LED status
LED not lit- unit is not functional
RED LED Dimly lit- unit is functional
RED LED Brightly lit- alarm has been activated
Fixing the unit
The unit can be xed to the wall by the xing holes at the top and the bottom
of the unit, using the M4.2 self-drilling screws provided. The unit can then be
slid on and o of these screws without the need to unscrew.
Avire Limited
Unit 1 The Switchback
Gardner Road
Maidenhead
Berkshire
SL6 , UK
T: 01628 540100
F: 01628 621 947
E: sales.uk@avire-global.com
W: www.memco-global.com
W: www.avire-global.com
-
+
MPS IG V01 (GB)
Memco is a brand of Avire
Avire Ltd
Unit 1, The Switchback
Gardner Road
Maidenhead
Berkshire SL6 7RJ, UK
T: 01628 540 100
F: 01628 621 947
E: sales.uk@avire-global.com
W: www.memco-global.com
W: www.avire-global.com
