MeiTrack IButton T1 Manuel utilisateur

MEITRACK RFID User Guide

Applicable Model: T1/T333/MVT600

MEITRACK RFID User Guide

Change History

File Name

MEITRACK RFID User Guide

Created By

Tracy Lv

Project

T1/T333/MVT600

Creation Date

Update Date

2013-10-16

2015-09-09

Subproject

Accessory User Guide

Total Pages

Version

V1.6

Confidential

External Documentation

MEITRACK RFID User Guide

Contents

1 Copyright and Disclaimer...............................................................................................................................................................- 4 -

2 Specifications.................................................................................................................................................................................- 4 -

3 Appearance ...................................................................................................................................................................................- 4 -

4 RFID Functions...............................................................................................................................................................................- 4 -

5 Installing the RFID Reader .............................................................................................................................................................- 5 -

5.1 Attaching the RFID Reader to Your Vehicle ........................................................................................................................- 5 -

5.2 Connecting the RFID Reader to a Tracker...........................................................................................................................- 5 -

6 Using RFID .....................................................................................................................................................................................- 6 -

6.1 RFID Control Output 1 (Starting the Engine).......................................................................................................................- 6 -

6.2 How RFID Works .................................................................................................................................................................- 7 -

6.3 Configuring RFID by Meitrack Manager..............................................................................................................................- 7 -

6.4 Configuring RFID by MS03 ..................................................................................................................................................- 8 -

6.4.1 Authorizing RFID Cards in Batches...........................................................................................................................- 8 -

6.4.2 Deleting Authorized RFID Cards in Batches .............................................................................................................- 8 -

6.4.3 Managing RFID Cards...............................................................................................................................................- 9 -

7 Querying Reports on MS03 .........................................................................................................................................................- 11 -

7.1 Event Report.....................................................................................................................................................................- 11 -

7.2 Driver I/O Status Report ...................................................................................................................................................- 12 -

8 Firmware Version ........................................................................................................................................................................- 12 -

MEITRACK RFID User Guide

1Copyright and Disclaimer

and are trademarks that belong to Meitrack Group.

The user manual may be changed without notice.

Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any

purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and recording.

Meitrack Group shall not be liable for direct, indirect, special, incidental, or consequential damages (including but not limited to

economic losses, personal injuries, and loss of assets and property) caused by the use, inability, or illegality to use the product

or documentation.

2Specifications

Item

Specifications

Dimension

79 mm x 42 mm x 13 mm

Weight

150g

Power consumption

25 mA

Operating temperature

-20°C to 55°C

Operating humidity

5%–95%

Operating voltage

5 V

Internal resistance

3.6R

3Appearance

RFID reader

RFID card

4RFID Functions

Identify the driver ID and grant permission to start the vehicle.

Through MS03 platform, driving habits can be evaluated by driver I/O status history.

MEITRACK RFID User Guide

5Installing the RFID Reader

5.1 Attaching the RFID Reader to Your Vehicle

Attach the RFID reader to your vehicle according to your needs.

5.2 Connecting the RFID Reader to a Tracker

Plug the RFID reader connector into the dedicated port of a tracker.

Dedicated RS232 ports of the T1/T333 are as follows:

Dedicated Wiegand 26 ports of the MVT600 are as follows:

RFID reader's status after it is connected to a tracker

After the RFID reader is connected to a tracker (T1/T333/MVT600), power on the tracker, then the indicator of the RFID

reader will blink red. When you swipe the RFID card on the RFID reader, the indicator of the RFID reader will blink green and

a "beep" sound will be heard. In this situation, data recording starts.

MEITRACK RFID User Guide

6Using RFID

6.1 RFID Control Output 1 (Starting the Engine)

Before starting the engine, ensure that:

1. Input 3 of the tracker is connected to the engine detection cable.

2. A RFID card has been authorized.

3. Input 1 of the tracker is connected to the engine control cable through a relay, as shown in the following figure.

Note: For details about how to authorize a RFID card, see the section 6.4.1 "Authorizing RFID Cards in Batches."

4. The RFID control output 1 function has been enabled by Meitrack Manager or MS03.

MEITRACK RFID User Guide

6.2 How RFID Works

After swiping the authorized RFID card on the RFID reader, the driver must start the engine within one minute. Otherwise,

input 1 of the tracker will be triggered (engine cut-off), and thus the driver cannot start the vehicle. At the moment, if you want

to start the engine, you must swipe the RFID card again.

6.3 Configuring RFID by Meitrack Manager

1. Connect your tracker to a computer and run Meitrack Manager.

2. Meitrack Manager will automatically detect the device, and the Device tab page for default parameters is displayed.

3. Select Authorize. On the tab page that is displayed, select RFID on the GPRS column.

MEITRACK RFID User Guide

Note: If this RFID option is deselected, the MS03 platform cannot collect statistics on RFID event reports after you swipe a RFID

card. The RFID event is enabled by default.

6.4 Configuring RFID by MS03

6.4.1 Authorizing RFID Cards in Batches

1. On the main interface, choose Management.

2. On the Management window that is displayed, select Sending command from Use Normal. The Sending command

window is displayed.

3. Select one or multiple trackers, select the Batch RFID authorization command, specify From the RFID number and

Quantity, and click Send command.

If only one RFID card needs to be authorized, set Quantity to 1.

6.4.2 Deleting Authorized RFID Cards in Batches

1. On the main interface, choose Management.

2. On the Management window that is displayed, select Sending command from Use Normal. The Sending command

window is displayed.

3. Select one or multiple trackers, select the Delete authorized RFID numbers in batches command, specify From the RFID

number and Quantity, and click Send command.

If only one authorized RFID card needs to be deleted, set Quantity to 1.

MEITRACK RFID User Guide

6.4.3 Managing RFID Cards

To collect statistics on drivers' driving records by driver I/O status report, the first is to add driver information and bind a driver

to a RFID card.

1. Add a driver.

On the main interface, choose Management.

On the Management window that is displayed, select Driver Info from Use Normal. The Driver Info window is displayed.

Click . On the Add driver window that is displayed, add driver information, and click Submit.

MEITRACK RFID User Guide

2. Add a RFID card.

On the Management window, select RFID card from Use Normal. The RFID card window is displayed.

Click . On the Add an RFID window that is displayed, set the RFID card number and bind a driver. These information will

be included in a driver I/O status report.

Note:

1. To manage RFID cards, driver information must be added first.

2. You can query a driver's driving mileage, parking duration, and time and location of starting the vehicle by driver I/O

status report.

Autres manuels pour iButton T1

Ce manuel convient aux modèles suivants

Table des matières

Manuels Système RFID populaires d'autres marques

Chainway

Chainway R1 Manuel utilisateur

IFM

IFM DTC600 Manuel utilisateur

Elatec

Elatec TWN4 MULTITECH NANO LEGIC 63 M Manuel utilisateur

RHOMBUS

RHOMBUS DR20 Manuel utilisateur

Sirit

Sirit IDentity 6204 Manuel utilisateur

SOREX

SOREX FLEX Manuel utilisateur

Omron

Omron V780-HMD68-EIP-KR Manuel utilisateur

IDENTEC SOLUTIONS

IDENTEC SOLUTIONS iPOINT Si Instructions d'utilisation

Shuttle

Shuttle BR06 Instructions d'utilisation

Digilock

Digilock Curve Keypad Basic Manuel utilisateur

Atid

Atid AT870 Manuel utilisateur

Chacon

Chacon 34958 Manuel utilisateur

Paxton

Paxton PROXIMITY architectural reader Manuel utilisateur

CipherLab

CipherLab 1800 series Manuel utilisateur

Brady

Brady FR22 Manuel utilisateur

Kronotech

Kronotech BLUEBOX GEN2 M30 UHF Manuel utilisateur

Unitech

Unitech RH767 Manuel utilisateur

Honeywell

Honeywell 026366.00 Manuel utilisateur

MeiTrack iButton T1 Manuel utilisateur

Manuels Système RFID populaires d'autres marques