MeiTrack T355 Manuel utilisateur
MEITRACK T355 User Guide
MEITRACK T355 User Guide
MEITRACK T355 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 2 -
Change History
File Name
MEITRACK T355 User Guide
Created By
Kyle Lv
Project
T355
Creation Date
Update Date
2011-05-16
2015-08-24
Subproject
User Guide
Total Pages
12
Version
V1.2
Confidential
External Documentation
MEITRACK T355 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 3 -
Contents
1 Copyright and Disclaimer...............................................................................................................................................................- 4 -
2 Product Overview ..........................................................................................................................................................................- 4 -
3 Product Function and Specifications .............................................................................................................................................- 4 -
3.1 Product Function ................................................................................................................................................................- 4 -
3.2 Specifications......................................................................................................................................................................- 4 -
4 T355 and Accessories ....................................................................................................................................................................- 5 -
5 Panel..............................................................................................................................................................................................- 6 -
5.1 Appearance.........................................................................................................................................................................- 6 -
5.2 LED Indicator.......................................................................................................................................................................- 7 -
6 First Use.........................................................................................................................................................................................- 7 -
7 Configured by Computer ...............................................................................................................................................................- 8 -
8 Quick Start Command....................................................................................................................................................................- 9 -
8.1 Real-Time Tracking..............................................................................................................................................................- 9 -
8.2 Smart Sleep –A73.............................................................................................................................................................- 10 -
9 MS03 Tracking System .................................................................................................................................................................- 11 -
10 Installing the T355 .....................................................................................................................................................................- 11 -
11 Safety and Usage Instructions ...................................................................................................................................................- 12 -
MEITRACK T355 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 4 -
1Copyright and Disclaimer
Copyright © 2015 MEITRACK. All rights reserved.
and are trademarks that belong to Meitrack Group.
The user manual may be changed without notice.
Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any
purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and recording.
Meitrack Group shall not be liable for direct, indirect, special, incidental, or consequential damages (including but not limited to
economic losses, personal injuries, and loss of assets and property) caused by the use, inability, or illegality to use the product
or documentation.
2Product Overview
The T355 is a magnetic GPS tracker developed by Meitrack Group and newly released in 2015. It is mainly used to track goods,
valuables, equipment, and other assets.
Two internal magnets make the tracker attached to the vehicle body and free of installation. If the tracker drops, a drop alarm
will be generated.
The unique rugged design of the shell ensures that the tracker is water resistant, dustproof, shockproof, and durable. The
standby time can last more than 365 days.
3Product Function and Specifications
3.1 Product Function
GPS + GSM dual-module tracking
Power magnet, easy to install
Drop alarm
Long standby time
IP66 water resistant
Embedded vibration sensor
Tracking on demand, and by time interval and distance
Enter/Exit Geo-fence alarm
Get a location by call
Rugged/shockproof design
Direction change report
Speeding alarm
External GPS antenna disconnect alarm
Heartbeat report
3.2 Specifications
Item
Parameter
Specifications
Outer case
Dimension
105 mm x 75 mm x 45 mm
Material
ABS
MEITRACK T355 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 5 -
Water resistance
IP66
Power consumption
Working voltage
3.7 V
Average current
50 mA
Standby current
0.7 mA
Internal battery
7400 mAh/3.7 V
Working hour
Consecutive working hours: > 120 hours
Standby time: > 8760 hours
GSM
Frequency band
850/900/1800/1900 MHz
Network
GSM/GPRS
Antenna
Internal antenna
GPS
Speed
0.1 m/s
Tracking sensitivity
-162 dBm
Positioning time
Cold start < 42s, hot start < 3s, recapture time < 2s
Positioning accuracy
10m, 2D RMS
Satellite receiving
channel
56 channels
Antenna
Internal/External antenna
Ambient environment
Operating temperature
-15°C to 65°C
Storage temperature
-25°C to 70°C
Humidity
5%–95% non-condensing
Weight
322g
Sensor
Internal 3D acceleration sensor (used to determine movement, vibration and
non-movement.)
Memory
8 MB flash (8,192 GPRS caches and 100 SMS caches)
LED indicator
LED indicators showing Power, GPS, and GSM status
4T355 and Accessories
Standard Accessories
T355
Travel adapter
Mini USB cable
CD
Switch sticker
Optional Accessories
External GPS antenna
MEITRACK T355 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 6 -
5Panel
5.1 Appearance
Micro SD card
slot
SIM card slot
Slide switch
USB port
Drop switch
LED indicator
Power magnet
External GPS antenna
MEITRACK T355 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 7 -
5.2 LED Indicator
The blue and green LED indicators will alternately blink every 8 seconds.
6First Use
1. Remove the device cover.
Use the mini screwdriver to remove the two screws to release the cover.
2. Insert the SIM card.
Gently push the SIM card into the card slot until you hear a click with its gold-plated contacts facing up.
Note: Ensure that the SIM PIN lock is closed, and the SIM card has sufficient balance and has subscribed the call ID service.
If you want to use the GPRS function, learn about the SIM card GPRS charging first.
Ensure that the device is turned off before replacing the SIM card. Hot plugging is not supported.
MEITRACK T355 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 8 -
3. Charge the battery.
To charge the battery, you can connect the device to the wall charger or a computer through the USB cable. When using
the device for the first time, you are advised to turn off the device and then charge the battery fully. When the battery
power is full, the LED indicator turns green.
Note: While charging, the device may heat up. This is normal, and this does not affect your device’s lifespan or
performance. If the battery power is low, it may affect positioning and data transmission. In this way, charge the battery
before use.
4. Start the device.
Turn the slide switch to the rightmost position, then press the drop switch 3 times within 5 seconds. The blue LED
indicator will blink 0.2s on and 0.2s off, indicating that the device has started. After power-on, wait for 15 seconds to allow
the device to complete the power-on self-test (POST) process.
Note: Ensure that the SIM card had properly installed before starting the device.
5. Stop the device.
Press the drop switch 3 times within 5s. The green LED indicator will blink 0.2s on and 0.2s off, indicating that the device
has stopped. After the device has stopped, wait for 5 seconds before restarting the device.
6. Install the device cover.
Place the back cover, and tighten the two screws by using the mini screwdriver.
7Configured by Computer
This section describes how to use Meitrack Manager to configure the T355 on a computer.
Procedure:
Left: close
Right: start
Drop switch
MEITRACK T355 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 9 -
1. Install the USB driver and Meitrack Manager.
2. Connect the T355 to a PC with a USB cable.
3. Run Meitrack Manager, and start the T355. Meitrack Manager will automatically detect the tracker model.
For details about Meitrack Manager, see the MEITRACK Manager User Guide.
Note: The CD delivered with the tracker contains Meitrack Manager. The software language will be automatically switched
according to the operating system language. Press Ctrl + L to manually switch the language.
8Quick Start Command
Before normal usage, common parameters must be set either by SMS command or by software.
8.1 Real-Time Tracking
This section describes how to query the current location of the T355, ensuring that the GPS is working normally.
Call the SIM card phone number that is used in the T355, and hang up after the dial tone rings 2-3 times.
Note: If an authorized phone number was set by SMS command A71, only this authorized phone number can call the SIM card
phone number and receive device's location information.
An SMS with a map link is received. Click the link to query the location.
SMS example:
Now,072714 02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329
The following table describes the SMS format:
Parameter
Description
Remarks
Now
Indicates the current location.
SMS header: indicates the alarm type.
For details about the SMS header, see the
MEITRACK SMS Protocol and MEITRACK GPRS
MEITRACK T355 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 10 -
Protocol.
072714 02:48
Indicates the date and time in MMDDYY
hh:mm format.
None
V
The GPS is invalid.
A = Valid
V = Invalid
16
Indicates the GSM signal strength.
Value: 1–32
The larger the value is, the stronger the signal is.
If the value is greater than 12, GPRS reaches the
normal level.
23Km/h
Indicates the speed.
Unit: km/h
61%
Indicates the remaining battery power.
None
http://maps.google.com/m
aps?f=q&hl=en&q=22.5401
03,114.082329
This is a map link.
Latitude: 22.540103
Longitude: 114.082329
None
If there is no valid GPS available, the tracker will reply the most recent valid position, along with GSM LBS information by AGPS.
If your mobile phone does not support HTTP, enter the latitude and longitude on Google Maps to query a location.
Note: The default password of the tracker is 0000. The password can be changed by using Meitrack Manager or SMS commands.
After the password is changed successfully by using an SMS command, only the authorized phone number can receive SMS
reports. The common format of an SMS command is: Password,Command,Parameter.
8.2 Smart Sleep –A73
This command is used to enable the sleep mode function, prolonging standby time to 8760 hours. In this mode, the scheduled
tracking and location tracking functions are disabled.
SMS text:
0000,A73,Sleep level
Send the text to the embedded SIM card phone number.
The device automatically replies to the SMS: IMEI,A73,OK. It indicates that the sleep mode is set successfully.
If the scheduled tracking function is required, disable the sleep mode.
Note:
When the sleep level is 0, the sleep mode is disabled.
Autres manuels pour T355
1
Table des matières
Autres manuels MeiTrack GPS
MeiTrack
MeiTrack MVT800 Manuel utilisateur
MeiTrack
MeiTrack TC68L Manuel utilisateur
MeiTrack
MeiTrack P88L Manuel utilisateur
MeiTrack
MeiTrack MVT100 Manuel utilisateur
MeiTrack
MeiTrack T322X Manuel utilisateur
MeiTrack
MeiTrack iButton MVT600 Manuel utilisateur
MeiTrack
MeiTrack iButton MVT600 Manuel utilisateur
MeiTrack
MeiTrack GPS Vehicle Tracker Manuel utilisateur
MeiTrack
MeiTrack T311 Manuel utilisateur
MeiTrack
MeiTrack TC68S Manuel utilisateur
MeiTrack
MeiTrack MT90G Manuel utilisateur
MeiTrack
MeiTrack T322X Manuel utilisateur
MeiTrack
MeiTrack VT310 Manuel utilisateur
MeiTrack
MeiTrack T322 Manuel utilisateur
MeiTrack
MeiTrack MT90G Manuel utilisateur
MeiTrack
MeiTrack MVT380 Manuel utilisateur
MeiTrack
MeiTrack iButton MVT600 Manuel utilisateur
MeiTrack
MeiTrack MT88 Manuel utilisateur
MeiTrack
MeiTrack MT90G Manuel utilisateur
MeiTrack
MeiTrack MVT100 Manuel utilisateur
