Meinberg LANTIME M100 Manuel utilisateur
Meinberg Radio Clocks
Lange Wand 9
31812 Bad Pyrmont, Germany
Phone: +49 (5281) 9309-0
Fax: +49 (5281) 9309-30
https://www.meinbergglobal.com
LANTIME M100: NTP Time Server with internal Reference Clock for DIN
Rail Installations
LANTIME M100 time servers can be installed to provide accurate time to small and medium sized computer
networks. This entry level time server synchronizes all systems either NTP- or SNTP-compatible utilizing a
built-in Meinberg radio clock as its primary reference time source. A stable and precise oscillator is capable of
bridging interferences or a temporary loss of reception. Its compact form factor offers an ideal solution to
network time synchronization needs in industrial and power generation/distribution networks.
Key Features
- Selectable Reference Sources: GPS: Satellite receiver for the Global Positioning System GNS:
Combined GPS/GLONASS/Galileo/BeiDou satellite receiver (L1 frequency band), can also be used for
mobile applications GNS-UC: GPS and Galileo Satellite Receiver with Up-Converter for Meinberg GPS
Antenna/Converter PZF: DCF77 correlation receiver for middle europe
- Synchronization of NTP and SNTP compatible clients
- Web-based status and configuration interface and console-based graphical configuration utility
- Supported net protocols: IPv4, IPv6, NTP, (S)NTP, DAYTIME, DHCP, HTTP, HTTPS, FTP, SFTP,
SSH, SCP, SYSLOG, SNMP, TIME, TELNET
- USB Port for installing firmware updates, locking frontpanel menu access and backup/restore of
configuration and log files
- Meinberg GPS Antenna/Converter Unit connected with up to 300m of standard coaxial cable RG58
rev 2022.1026.0953 lantime-m100Page 1/4
Description
Three LEDs (green/red) indicate the status of the three main components: Reference Time (e.g. GPS), Time
Synchronization Service (NTP) and Network (Link status). A fourth red LED is labeled ALARM and can be configured to
signal any event that is covered by the notification handling routines.
The configuration of the system can be done by using a standard web browser for accessing the extensive but
straightforward html interface. Alternatively a text based and menu driven setup utility can be started from the shell
prompt after logging into the unit via Telnet or SSH. Initial configuration can be performed using the RS232 console port
and a terminal program.
The LANTIME M100/GPS is equipped with a high precision "TCXO" (oscillator option: up to "OCXO HQ"). Please check
our oscillator options page for technical specifications. The oscillator determines the holdover characteristics (e.g. when
the received signal is disturbed or jammed).
Characteristics
Control Elements Serial Terminal Interface (RS232) for initial configuration, Status LEDs
Status Info Four Bicolor LEDs showing Status of:
- Reference Time
- Time Service
- Network
- Alarm
Network Interface RJ-45 Network Connection 10/100 MBit
Universal Serial Bus (USB)
Ports 1x USB port on front panel for:
- installing firmware upgrades
- performing backups and restoration of configuration files
- copying security keys
- locking & unlocking front buttons
Power Supply AC/DC power supply (standard)
Rated voltage range: UN = 100-240 V AC (50-60 Hz) / 100-240 V DC
Max. voltage range: Umax = 90-264 V AC (47-63 Hz) / 100-250 V DC
Low DC (option):
Rated voltage: UN = 48 V DC
Max. voltage range: Umax = 20-60 V DC
Power Consumption 20W
CPU
* AMD Geode
rev 2022.1026.0953 lantime-m100Page 2/4
Operating System of the
SBC Linux with nano kernel (incl. PPSkit)
Network Protocols OSI
Layer 4 (Transport Layer) TCP, UDP
Network Protocols OSI
Layer 7 (Application Layer) Telnet, FTP, SSH (including SFTP, SCP), HTTP, HTTPS, syslog, SNMP
Internet Protocol (IP) IPv4, IPv6
Network Autoconfiguration
Support IPv4: Dynamic Host Configuration Protocol - DHCP (RFC 2131)
IPv6: Dynamic Host Configuration Protocol - DHCPv6 (RFC 3315) and
Autoconfiguration Networking - AUTOCONF (RFC 2462)
Network Time Protocol
(NTP) NTP v2 (RFC 1119), NTP v3 (RFC 1305), NTP v4 (RFC 5905)
SNTP v3 (RFC 1769), SNTP v4 (RFC 4330)
MD5 / SHA-1 Authentication and Autokey Key Management
Time Protocol (TIME) Time Protocol (RFC 868)
IEC 61850 Synchronization of IEC 61850-compliant devices using SNTP
Hypertext Transfer Protocol
(HTTP) HTTP/HTTPS (RC 2616)
Secure Shell (SSH) SSH v1.3, SSH v1.5, SSH v2 (OpenSSH)
Telnet Telnet (RFC 854-RFC 861)
Form Factor DIN Rail mountable Aluminium Profile chassis (125,5mm x 105mm x 189mm / W x H x
D)
Ambient Temperature 0 ... 50 °C / 32 ... 122 °F
Humidity Max. 85 %
Contents of Shipment Included in delivery is a MEINBERG outdoor antenna incl. mounting kit, pre-assembled
antenna cable, CAB-CONSOLE-RJ45 cable for initial setup and documentation on USB
storage.
Technical Support Meinberg offers free lifetime technical support via telephone or e-mail.
Warranty Three-year warranty
Firmware Updates Firmware is field-upgradeable, updates can be installed directly from the unit or via a
remote network connection. Software updates are provided free of charge for the
lifetime of your Meinberg product.
RoHS Status of Product This product is fully RoHS-compliant.
rev 2022.1026.0953 lantime-m100Page 3/4
WEEE Status of Product This product is handled as a B2B (Business to Business) category product. To ensure
that the product is disposed of in a WEEE-compliant fashion, it can be returned to the
manufacturer. Any transportation expenses for returning this product (at end-of-life)
must be covered by the end user, while Meinberg will bear the costs for the waste
disposal itself.
Additional Information Additional information about the Meinberg LANTIME family of NTP time servers and
other LANTIME models can be found on the [1]LANTIME NTP Time Server Family Page
.
Manual
There is no online manual available for this product.: [2]Contact us
Links:
[1] https://www.meinbergglobal.com/english/products/ntp-time-server.htm
[2] mailto:[email protected]
rev 2022.1026.0953 lantime-m100Page 4/4
Autres manuels pour LANTIME M100
3
Autres manuels Meinberg Serveur
Meinberg
Meinberg microSync HR100/DC Manuel d'utilisation et d'entretien
Meinberg
Meinberg LANTIME IMS-M500 Manuel utilisateur
Meinberg
Meinberg IMS - LANTIME M3000S Manuel utilisateur
Meinberg
Meinberg LANTIME M900/GPS/LNE/RPS/BGT Manuel d'utilisation et d'entretien
Meinberg
Meinberg LANTIME M300 Manuel d'utilisation et d'entretien
Meinberg
Meinberg LANTIME M600 MRS Manuel utilisateur
Meinberg
Meinberg LANTIME/SHS/BGT Manuel utilisateur
Meinberg
Meinberg LANTIME CPU Expansion Shelf Manuel utilisateur
Meinberg
Meinberg LANTIME M200/GPS/RPS Manuel d'utilisation et d'entretien
Meinberg
Meinberg IMS-M4000 Manuel utilisateur
Meinberg
Meinberg IMS-M1000-S Manuel utilisateur
Meinberg
Meinberg LANTIME M300 Manuel d'utilisation et d'entretien
Meinberg
Meinberg M900 Manuel utilisateur
Meinberg
Meinberg IMS LANTIME M4000 Manuel utilisateur
Meinberg
Meinberg SyncFire 1500 Manuel utilisateur
Meinberg
Meinberg LANTIME M400/GPS Manuel utilisateur
Meinberg
Meinberg LANTIME M300/GPS Manuel utilisateur
Meinberg
Meinberg IMS-LANTIME M3000 Manuel utilisateur
Meinberg
Meinberg IMS-LANTIME M500 Manuel utilisateur
Meinberg
Meinberg LANTIME M200/GPS Manuel utilisateur
