1. Warnings, Cautions, and Notes
•Read the safety instructions carefully before installation.Always follow the safety
instructions during installation and during maintenance
•Keep this manual so that it is accessible to professionals and future needs.
•Installation and initial launch can only be completed by the authorized service team
indicated by the manufacturer.
•All electrical installation and service work shall be done by certified and qualified per-
sonnel in accordance with local codes and regulations.
•Use ONLY with the electrical voltage specified
•Ensure the appliance is properly earthed.
•Use ONLY in well ventilated areas.
•The minimum clearance from any combustible materials is 300cm from hot air outlet
and 200cm from the top and sides.
•Keep children and animals away from heater at all times.
•When used with a thermostat, bear in mind, the heater may start at anytime.
•Use heater in accordance with all fire regulations.
•NEVER use heater in living or sleeping areas.
•NEVER leave a heater plugged in without adult supervision if children or animals are
likely to be present.
•NEVER cover or impede air flow into or out of heater.
•Disconnect the heater from the power supply when not in use
•Remove the ash from the heaters main chamber every 500-600kg of wood pellet con-
sumption (depending on pellet’s quality).
•Remove the ash for the heaters exhaust gases tubes every 3.000-4.000kg (depending on
pellet’s quality)
•Keep clean the heater’s air fan. It must be cleaned frequently (at least once per month)
in case is used in poultry rooms, by using compressed air
•The belt’s driving the heaters air fan, must be checked often if there are tight.
•Important: After the 1st month of operation, the belts must checked if there are tight.
•The chimney must be cleaned at least 1-2 times per year, depending on the consump-
tionThe Producer reserves the right for technological changes as technical details, size,
appearance and accessories of the Air Heater without previously informing the user, as
long as it doesn’t meaningful interfere with the functioning of the appliance.
Maintenance increases operation length and life of the unit
