MEGASTEK MT80 Manuel utilisateur
Contents
1.Product Features.................................................................................................................. 2
2.Safety instruction................................................................................................................ 2
3.Specification and parameters......................................................................................... 3
4.Product view.......................................................................................................................... 4
6.Parameter setting................................................................................................................ 5
7. Change the password....................................................................................................... 5
8. Low battery alarm.............................................................................................................. 6
9.Tracking regularly by GPRS............................................................................................. 6
10.GPRS data logger.............................................................................................................. 7
11．Auto APN setting............................................................................................................. 7
12．Time zone setting........................................................................................................... 7
13. Authorized number......................................................................................................... 7
1) Set the authorized number by SMS....................................................................7
2) Easy authorized phone no. setup by calling....................................................8
14. Monitoring function......................................................................................................... 8
15.SOS emergency call......................................................................................................... 8
16.Belt on/off alarm............................................................................................................... 9
17. Geo-fence alarm...............................................................................................................9
18. LCD display...................................................................................................................... 10
19.Alert event type table....................................................................................................12
21.SMS uploading data format and example............................................................. 13
23.Attention............................................................................................................................. 14
1.Product Features
◆Tracking SMS/GPRS(TCP/UDP)
◆Tracking by Interval/Calling;Waterproof IP67
◆Displaying Time,Battery Lever,GPRS status,GSM strength
◆Contact ECG Monitoring for Heart Rate, Electrocardiogram,Heart Age/Heath
Index
◆SOS/Belt off/Geo-fence/Low-battery alarm
◆GPS Hish-accuracy Positioning
◆E-ink Screen 1.28inch
◆Photoelectric Pulse Measurement
◆Gyroscopic + axis Acceleration Sensor
◆Step Counting,Sleeping Status
◆Human Falling Down Detection(developing)
◆Two Way Calling, Voice Monitoring
◆Bluetooth Connection(此功能还没加上去，备用)
◆Automatically Timing when no power or power off
◆At least One Week Standby Time
◆Built in 8 Memory, Built in 400mAh Lithium Battery
2.Safety instruction
Read these simple guidelines. Not following them may damage the tracker, put you in
danger or break the law.
Switch on safely
Do not switch the tracker on when wireless phone use
is prohibited or when it may cause interference or danger.
Switch off in hospitals
Follow any restrictions. Switch the tracker off near medical
equipment
Switch off inaircraft
Follow any restrictions. Switch the tracker off on the plane.
Switch off when
refueling
Do not use the tracker when at a refueling point.
Switch off near
blasting
Follow any restrictions. Do not use the tracker when blasting is
in progress.
Qualified service
Only qualified personnel can repair the tracker.
Water resistance
IP67
3.Specification and parameters
Items
Specification
Charging Voltage
DC 4.2V
Internal Battery
420 mAh
Dimension
56.49*52.50*16.95mm
Weight
70g
Operating Temperature
-20 ～+55 °C
GSM Module
Quad Band GSM 850/900/1800/1900 MHz
GPS Chipset
Newest Ublox chipset
GPS Sensitivity
-160Db
GPS Frequency
L1, 1575.42 MHz
C/A Code
1.023 MHz chip rate
Channels
50 Channels
Position Accuracy
<10 M, 2D RMS
Velocity Accuracy
0.1 M/S
Time Accuracy
Satellite Time: 1 millisecond time synchronization
Update Time
Average 0.1 second
Hot Start up
Average 1 second
Max. Altitude
18,000m (Max. 60,000 ft)
Max. Speed
500 m/s (Max. 1000 knots)
Max. Acceleration
less than 4g
4.Product view
5.First use
Please read this manual before using tracker.
5.1 Remove the back cover
-Use the mini screwdriver to remove the four screws to release the
back cover
5.2 Insert the SIM card
-Tracker only supports Micro SIM card (Do not cut it to nano SIM
card)
- Check the lock code of the SIM card is turned off
- Check the SIM card has not run out of credit money
(Test the SIM card in a phone to make sure it can make phone call
or send SMS)
- If you need the function of real time tracking or easy authorized
phone number setup by calling, please make sure the SIM card
installed supports displaying caller ID
- When fixed the battery cover, please make sure its gasket do not
come out before you turn of the screw, then long press 5s to turn
on/off device
- After setup or turn device on, please positioning in an open
environment every time
√
√
5.3 Fixed the back cover
Please do not let the gasket come out when you turn of the screw.
5.4 ON/OF
-Press the power switch for 5 seconds and tracker will switch on/off
5.5 Charing
Use the special charger,and the charge time is about 2.5-3 hours
Not with bathing Not with swimming Waterproof for showering
5.6Parameters setup
-Tracker only supports APP steup software by smart phone or by
sending command via SMS.
6.Parameter setting
Configure tracker by sending SMS commands or through PC platform, and the
default password is 000000. This manual only introduce for how to setup
parameters via SMS,
Practical application may vary when accessorizing differently, please kindly note.
7. Change the password
SMS command: $SMS,******;W001,######;!
For example: $SMS,000000;W001,123456;!
******: user password, the range of 6 characters, default password is 000000
######: new password, the range of 6 characters
8. Low battery alarm
When the battery level is lower than 15%, it will send SMS to all
authorized numbers and send data to server if GPRS connected. Tracker will
be off automatically if the power level is 0%; during charging, tracker will
automatically switch on when power level is higher than 15%, device will
send a warning SMS to all authorized number and send data to server if GPRS
connected.
9.Tracking regularly by GPRS
SMS command:
$SMS,000000;W002,APN,Username,Password;W003,IP,Port;W004,ID;W005,X;
W009,Y;!
For example:
$SMS,000000;W002,cmnet,,;W003,192.168.1.1,8088;W005,1;W009,1;!
APN: Access point name of network
IP: server’s IP address
Username: accesses port’s user name
Port: server’s port
Password: accesses port’s password
ID: device ID
X: GPRS upload interval, range of: 0~65535, default is 0, unit is 30 seconds
Example: if X is 2, 2*30s=60s, so it means the GPRS upload interval is 60
seconds.
Y: GPRS upload mode, range of: 0~2, default is 0
（0 means disable GPRS function, 1 means upload by TCP, 2 means upload by
UDP）
10.GPRS data logger
Tracker has build in 8M memory for GPRS data save. When GPRS interval
tracking can not upload to server, data will be automatically stored into the
memory. After that, once the GPRS reconnected, tracker will send the data to
server again.
Note: real time data will be sent first, the priority of the stored data is
secondary.
11．Auto APN setting
The APN list can be configured before delivery (default is China APN). When
insert SIM card, tracker will automatically acquire APN from the APN list. If user
already set APN, then the tracker will not acquire APN automatically.
12．Time zone setting
SMS command: $SMS,000000;W020,X;!
For example: $SMS,000000;W020,480;!
X: time zone’s value, range of:-720~780, default: 0, unit: minute
1 hour is equal to 60 minutes, and Beijing is GMT+8, 60*8=480(parameter),
so this command means 480 is the time zone in Beijing
13. Authorized number
1) Set the authorized number by SMS
SMS command: $SMS,000000;W010,NO.,Phone Number,ABC;!
For example: $SMS,000000;W010,1,13800000000,010;!
Note:
NO.: authorized number’s serial number, range of: 1~3
Phone Number: authorized number, range of: 0~19 characters
A: Geo-fence, range of 0~1; when the parameter ‘A’ is 0, it means disable Geo-
fence alarm, otherwise it means enable Geo-fence alarm. Default is 0
B: monitoring function, range of 0~1; when the parameter ‘B’ is 0, it means
disable monitoring function, otherwise it means enable monitoring function.
Default is 0
C: SOS emergency call, range of 0~1; when the parameter ‘C’ is 0, it means
disable SOS emergency call, otherwise it means enable this function. Default
is 0
Example above means set the 1st authorized number is 13800000000 and
enable monitoring function.
2) Easy authorized phone no. setup by calling
Tracker only supports up to three authorized numbers; we can set the
authorized number by phone call if there are not set authorized number fully
(this function only supports to set the authorized number, not includes its
related functions). Set as follows:
Any non-authorized number calls to the tracker over than 10 seconds, the
tracker will hang up the line automatically and the yellow light will blink for 30
seconds. During these 30 seconds, press SOS button less than 3 seconds, and
then successfully set this call-in number as a new authorized number and send
an SMS to this number to inform the setting is OK.
14. Monitoring function
If enable monitoring function, when the authorized number call to the
tracker, it will answer the call automatically and shut down the speaker and the
background voice of the tracker will be listened.
Note: Please make sure the SIM card installed supports displaying caller ID
when you want to enable this function.
15.SOS emergency call
Press SOS button for 3 seconds or longer, tracker will send SOS alarm SMS
to all authorized numbers. If the authorized number is set with the SOS
emergency calling function, tracker will call those authorized numbers one by
one in order. If one of those is answered, the tracker will not call the others.
16.Belt on/off alarm
-- After connected with the belt, tracker will send belt on alarm to all of the
authorized phone numbers and send alarm data to service;
-- After unconnected with the belt or belt has been cut, tracker will send
belt off alarm to all of the authorized phone numbers and send alarm data to
service.
Note: after connected with the belt, tracker only can be turned on
and can not be turned of
17. Geo-fence alarm
SMS command: $SMS,000000;W018,NO.,name,lat,lng,radius;!
Example 1: $SMS,000000;W018,1,school,22.12345,114.12345,10.50;!
Example 2: $SMS,000000;W018,1,home,,,10.50;!
Note:
NO.: serial number of geo-fence, range of: 1~5
name: name of geo-fence, range of: 0~9 characters
lat: center’s latitude, range of: -90.00000000~90.00000000, unit: degrees
lng: center’s longitude, range of:-180.00000000~180.00000000, unit: degrees
radius: geo-fence’s radius, range of: 0.0~1.79E+308, unit: meters
Note:
The geo-fence is a perfect circle based on the preset radius and center.
When set the geo-fence, longitude and latitude can be filled in command directly;
tracker will get the newest position automatically to be fence center if longitude and latitude
are empty in command. After enable geo-fence function, when tracker moves in/out the
preset geo-fence, it will send an SMS alarm to the authorized phone number (please also
enable the Geo-fence function when you set the authorized number) and send this alarm to
server via GPRS.
Table des matières
Autres manuels MEGASTEK Montre
