To unlink a Receiver
1.1 Press and hold the Function button on the Receiver for about 5 second until the DMX indicator flashes once and then goes off. Now the Receiver is unlinked
8
Connection
Point to Multi Point Connection
1.1 Connect the Transceiver to power, the DMX indicator should be flashing green.
1.2 Connect DMX signal into the Transceiver, the DMX indicator should be solid green.
1.3 Connect the Receivers to power, the DMX indicator should be off ( if the receiver connection light is not off you need to unlink your receiver)
1.4 Press and quickly release the Function button on the Transceiver. The transmitter will scan for all unlinked receivers for a period of 10 seconds– the
connection indicator on both Transmitter and Receivers will flash rapidly.
1.5 If the connection is successful the DMX indicator on the Transceiver and Receivers will be solid green on. If the connection indicator is not on Green, check
that the Receiver is in range and repeat the procedure.
Multi Point to Multi Point Connection
1.1 Connect the First Transceiver to power, the DMX indicator should be flashing green.
1.2 Connect DMX signal into the First Transmitter, the DMX indicator should be solid green.
1.3 Connect the Receiver (s) to power, the DMX indicator should be off ( if the receiver connection light is not off you need to unlink your receiver)
1.4 Press and quickly release the Function button on the First Transceiver. The transmitter will scan for all unlinked receivers for a period of 10 seconds– the
DMX indicator on both Transmitter and Receivers will flash rapidly.
1.5 If the connection is successful the DMX indicator on the Transceiver and Receiver will be green on. If the connection indicator is not on Green, check that
the Receiver is in range and repeat the procedure.
1.6 Connect the Second Transceiver to power, the DMX indicator should be flashing green.
1.7 Connect DMX signal into the Second Transceiver, the DMX indicator should be solid green.
1.8 Connect the Receiver (s) to power, the DMX indicator should be off ( if the receiver connection light is not off you need to unlink your receiver)
1.9 Press and quickly release the Function button on the Second Transceiver. The transmitter will scan for all unlinked receivers for a period of 10 seconds the
connection indicator on both Transmitter and Receivers will flash rapidly.
1.10 If the connection is successful the DMX indicator on the Transmitter and Receiver will be solid green on. If the connection indicator is not on Green, check
that the Receiver is in range and repeat the procedure.
1.11 You can repeat the process up to 16 Transmitters.
To unlink all Receiver
1.1 Press and hold the Function button on the Transceiver for about 5 second until the DMX indicator flashes once and then goes off. Now the Receivers are
unlinked
Point to Point Connection
1.1 Connect the Transceiver to power, the DMX indicator should be flashing green.
1.2 Connect DMX signal into the Transceiver, the DMX indicator should be solid green.
1.3 Connect the Receiver to power, the DMX indicator should be off ( if the receiver DMX light is not off you need to unlink your receiver)
1.4 Press and quickly release the Function button on the Transceiver. The transmitter will scan for all unlinked receiver for a period of 10 seconds– the
DMX indicator on both Transmitter and Receivers will flash rapidly.
1.5 If the connection is successful the DMX indicator on the Transceiver and Receiver will be green on. If the connection indicator is not on Green, check that
the Receiver is in range and repeat the procedure.
To make a Transceiver a Receiver
1.1 Press and hold the Function button on the Transceiver while you are connecting to power till DMX indicator light is lit.
To return a Receiver to original Transceiver
1.1 Press and hold the Function button on the Transceiver while you are connecting to power till DMX indicator light is lit.
