Mega Video MPV-QL-SD Manuel utilisateur
001B1LQXZ1A1
Prime HDR
Micro Dome IP Camera
User’s Manual
Ver. 1.1
1
Table of Contents
1. Overview................................................................................................................................2
1.1 Features......................................................................................................................2
1.2 Package Contents .......................................................................................................3
1.3 Dimensions..................................................................................................................4
1.5 Connectors (Indoor Only).............................................................................................5
1.6 Function Cable Definition (Outdoor Only) ....................................................................6
2. Camera Cabling.....................................................................................................................7
2.1 Connect Ethernet Cable...............................................................................................7
2.1.1 Indoor Camera.............................................................................................7
2.1.2 Outdoor Camera ..........................................................................................8
3. System Requirements ........................................................................................................10
4. Access Camera ...................................................................................................................11
5. Setup Video Resolution......................................................................................................14
6. Configuration Files Export / Import ...................................................................................15
7. Tech Support Information ..................................................................................................16
7.1 Delete the Existing Viewer.........................................................................................16
7.2 Setup Internet Security..............................................................................................17
Appendix: Technical Specifications
2
1. Overview
The Prime HDR Micro Dome IP Camera is a high-end surveillance solution with
easy set-up design. Supporting up to 4M real-time video and Quad Streams
Codec (H.264 Baseline / Main / High Profile + MJPEG), the camera offers
supreme image quality while keeping efficient bandwidth for storage
management.
Equipped with HDR function, the camera provides up to 4M real-time stream
with 2 shutter WDR images, which is suitable for scenarios under extreme light
contrast or environments with changing lighting.
The compact outlook design of the camera is ideal for discreet installations
where space is limited, makes install and setup quickly and easily, with 3-axis
mechanism, a factory-focused lens and a simple PoE connection.
1.1 Features
Multiple Progressive Scan CMOS Sensor Support 4M Resolution
Multi-exposure HDR
Low Latency Streaming
Low Power Consumption on Encoding
Quad Codec Support (H.264 Baseline / Main / High Profile + MJPEG)
Quad Streams Support
Smart Event Function-
Motion Detection / Network Failure Detection / Tampering Alarm / Periodical
Event / Manual Trigger / Audio Detection
Text Overlay and Privacy Masks
3D Motion Compensated Noise Reduction (MCTF)
BNC Analog Output
Weatherproof (IP66 international)*
64GB SDXC microSD Card Support
ONVIF Profile Support
(*) Optional
3
1.2 Package Contents
Please check the package containing the following items listed below.
Prime HDR Micro Dome IP Camera
Indoor / Outdoor (with Cable)
Self-tapping screws (x3)
Plastic Anchors (x3)
Security Torx
CD
(bundled software and documentation)
Quick Guide
NOTE: The supplied self-tapping screws are for soft substances /
materials such as wood. For other installation environments such as
cement wall, it is required to pre-drill and use plastic anchors before
fastening the supplied self-tapping screws on the wall.
4
1.3 Dimensions
The dimensions of the camera are shown below.
5
1.5 Connectors (Indoor Only)
The diagram below shows the default button, microSD card slot and various
connectors of the camera. Definition of each connector is given as follows.
No.
Connector
Pin Definition
Remarks
1
RJ-45
- For network and PoE connections
2
Speaker
- Audio Out
3
Power (DC 12V / AC
24V)
1 DC 12V
AC 24V 1
Power connection
2 GND
AC 24V 2
4
Default Button
- Press the button with a proper tool for at least 20
seconds to restore the system.
5
Alarm & Audio I/O
1 Alarm Out +
Alarm connection
2
Alarm Out -
3
Alarm In +
4
Alarm In -
5
GND
Ground connection
6
Audio Out
Two-way audio
transmission
7
Audio In
6
BNC*
-
For analog video output
7
Built-in Microphone
-
Audio In
8
microSD Card Slot
-
Insert the microSD card into the card slot to store
videos and snapshots. Do not remove the microSD
card when the camera is powered on.
*Please contact the manufacturer for the compatible BNC cable.
NOTE: It is not recommended to record with the microSD card for 24/7
continuously, as it may not be able to support long term continuous data
read/write. Please contact the manufacturer of the microSD card for
information regarding the reliability and life expectancy.
6
1.6 Function Cable Definition (Outdoor Only)
No.
Connector
Pin Definition
Remarks
1
RJ-45
- For network and PoE connections
2
Power Jack (DC
12V / AC 24V)
1 DC 12V
AC 24V 1
Power
connection
2 GND
AC 24V 2
3
Audio I/O
Pink
Audio In
Two-way audio
transmission
Green
Audio Out
4
Alarm I/O
(4-Pin Terminal
Block)
1
Alarm In –
2
Alarm In +
3
Alarm Out –
4
Alarm Out +
5
BNC
-
For analog video output
-
Default Button
-
Please refer to Default Button in the table under
Camera’s Connectors (Indoor Only).
-
microSD Card Slot
-
Please refer to microSD Card Slot in the table
under Camera’s Connectors (Indoor Only).
NOTE: It is not recommended to record with the microSD card for 24/7
continuously, as it may not be able to support long term continuous data
read/write. Please contact the manufacturer of the microSD card for
information regarding the reliability and life expectancy.
7
2. Camera Cabling
Before users connect cables, make sure that all cables and the power adaptor
are placed in dry and well-waterproofed environments, e.g. waterproof boxes.
The purpose is to prevent moisture accumulation inside the camera and
moisture penetration into cables, which might lead to camera breakdown.
Please follow the instructions below to complete camera connection.
2.1 Connect Ethernet Cable
Refer to the camera type and follow the instructions to connect Ethernet cable.
2.1.1 Indoor Camera
PoE Connection
Before connecting Ethernet cable, please loosen the two security screws of the
indoor camera and detach the dome cover.
Connect one end of the Ethernet cable to the RJ-45 connector of the indoor
camera, and plug the other end to a PSE switch. Check the status of the link
indicator and activity indicator LEDs. If the LEDs are unlit, please check the LAN
connection.
NOTE: Please use an Ethernet cable without the boot cover to connect
the indoor camera. Otherwise, the dome cover cannot be installed.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
After cable connection, attach the dome cover back to the indoor camera and
fasten the two security screws.
8
2.1.2 Outdoor Camera
The RJ-45 cable of the outdoor camera is either RJ-45 cable or IP66 RJ-45
cable. Refer to the cable type and follow the instructions below to connect
Ethernet cable and waterproof connector.
RJ-45 Cable
IP66 RJ-45 Cable
RJ-45 Cable
Follow the instruction below to waterproof the connector of the RJ-45 cable.
Plug the Ethernet cable to the connector of the
RJ-45 cable and coat the joint with silicone gel.
Make sure there is no gap between the
Ethernet cable and the connector; otherwise,
waterproof function cannot be guaranteed.
IP66 RJ-45 Cable
For IP66 RJ-45 cable, please use an RJ-45 IP66 plug for connection to prevent
water damage. Follow the steps below for cable connection.
Step 1:
Take out the supplied connector from the
RJ-45 IP66 plug. Loosen the thread-lock
sealing nut on the plug. Then thread the
Ethernet cable through the thread-lock sealing
nut and the plug. If the Ethernet cable is
already attached to a connector, please
remove it first.
Step 2:
Carefully remove a section of rubber coating
from the end of the Ethernet cable to reveal
the wires. Inset the wires to the correct pins of
the connector. Plug the Ethernet cable to the
connector of IP66 RJ-45 cable.
9
Step 3:
Fasten the RJ-45 IP66 plug to the connector of
the IP66 RJ-45 cable. Lastly, tighten the
thread-lock sealing nut to the plug.
Step 4:
Connect the other end of the Ethernet cable to a waterproof PoE switch / hub.
Table des matières
Autres manuels Mega Video Caméra de sécurité
