MediaRange MR734 Instructions d'installation
PORTABLE BLUETOOTH® SPEAKER
STEREO AUDIO SYSTEM
GB User manual, Operating- and safety
instructions, Warranty conditions
Item no.: MR734
FM Radio
Bluetooth®
GB Getting started and operation
● Select the requested playback mode by keep this button pushed:
1. Bluetooth mode; 2. Music playback via memory card; 3. Music playback via USB flash drive; 4. FM tuner; 5. Music playback via AUX.
● Resume or stop streaming music with the „Play I Pause“ button; Bluetooth mode: Answer phone calls by using the „Play I Pause“
button; FM-mode: Start and stop the automatic FM tuner channel search with the „Play I Pause“ button.
●Switch to the next or previous title with the buttons „Back“ and „Forth“;
Use the buttons in the FM-mode to select and adjust manually the frequency of the radio station.
●Keep the „-“-button pushed to lower the volume. Keep the „+“-button pushed to raise the volume.
Play I Pause;
Playback mode;
Answer phone calls;
automatic FM tuner channel search
Raise volume
Lower volume
Next title;
FM channel search
Previous title;
FM channel search
GB Getting started and operation
Slot for memory cards and USB flash drives: The device is supporting micro SD, micro SDHC and micro SDXC memory cards. Insert a memory
card, with the contacts up, into the slot. The card will be latched inside the slot and you will hear a „click“.
3.5mm AUX I Line in for music playback via connected devices;
FM antenna output: Use the 3.5mm AUX cable as antenna while using the FM tuner mode
Built-in microphone for hands-free function
On and off switch. Slide the switch to the left to turn on the speaker. Slide the switch to the right again to turn off the device.
Micro USB port for charging the device.
Slot for memory cards
USB flash drive
port
Micro USB port
built-in
microphone
Mic
On / Off switch
ON OFF
3.5mm AUX I Line in;
FM antenna output
AUX
ON OFF
Mic
AUX
GB Playback mode I Bluetooth
1. Turn on the speaker. It starts in the Bluetooth mode and searches immediately previous Bluetooth settings. If there is no connection, it searches
for new Bluetooth devices.
2. Turn on your device and be sure Bluetooth is activated to pair it with the speaker. The speakers Bluetooth name is „MR734“. As soon as your device
has been connected successfully, you are able to stream your music. You can use your connected device or the navigation pannel on the speaker for
music control.
Note: Each device need to be paired once with the speaker. The speaker is searching immediately previous Bluetooth settings in future and devices will be paired
automatically.
1
OFF AUXON
OFFON
OFF AUXON
MR734
2
GB Playback mode I Memory card slot
1. Turn on the speaker and insert a memory card, with the contacts up, into the memory card slot. The slot will latch the card and you will hear a „click“
if it is inserted correctly.
2. The memory card will be detected automatically and the speaker starts to playback your music. Use the navigation pannel for music control. Push
the memory card carefully to remove the card from the slot again.
Note: If the speaker will be turned off or if you switch the playback mode, the speaker will memory the last played title and starts to playback this title if you select the
playback mode again.
1
OFF AUXON
OFFON
OFF AUXON
OFF AUXON
2
GB Playback mode I USB flash drive
1. Turn on the speaker and connect an USB flash drive into the USB port of the speaker.
2. The USB flash drive will be detected automatically and the speaker starts to playback your music. Use the navigation pannel for music control.
Note: If the speaker will be turned off or if you switch the playback mode, the speaker will memory the last played title and starts to playback this title if you select the
playback mode again.
1
OFF AUXON
OFFON
OFF AUXON
OFF AUXON
OFF AUXON
2
GB Playback mode I FM tuner
1. Plug in the 3.5mm AUX cable and turn on the speaker. Keep the „Play I Pause“ button pushed once to switch to the FM tuner mode.
2. Start and stop the automatic FM tuner channel search by pushing the „Play I Pause“ button. To adjust or search a radio station manually, use the
buttons „Back“ and „Forth“.
Note: For using the FM tuner mode, the AUX cable need to be connected as antenna. If the speaker will be turned off or if you switch the playback mode, the speaker will save
the last selected radio station. As soon as you turn on the device and switch to the FM mode again, the speaker will resume streaming the last radio station. There is no need
to start the automatic FM tuner channel search again.
OFF AUXON
OFF AUXON
12
OFF AUXON
OFFON
OFF AUXON
FM Radio
GB Playback mode I 3.5mm AUX line in
1. Turn on the speaker and plug in the 3.5mm AUX cable. The speaker will switch automatically to the AUX playback mode.
2. Connect your device by using the AUX cable to the speaker and start to stream your music. Use the music player of your device for music control.
The volume can be lowered and raised by the navigation pannel of the speaker and/or the connected device.
1
OFF AUXON
OFFON
OFF AUXON
OFF AUXON
OFF AUXON
2
GB Explanation: Hands-free function
Connect your smartphone or tablet via Bluetooth with the speaker in order to use the hands-free function. Therefor please switch to the Bluetooth
mode:
●To answer a call, simply press the "Play I Pause" button.
●Push the "Play I Pause" button during a call to redirect the call from the speaker to your device. Push the button again to redirect the call back to
the speaker in order to use the hands-free function.
Push the button to answer incoming calls
Push the button during a call to redirect the call to
your paired device.
OFF AUXON
GB Explanation: LED indicator lights and acoustic signals
Explanation of LED indicator lights:
● LED indicator is flashing rapidly: The speaker is running in the Bluetooth-mode and is searching for previous Bluetooth settings; The speaker is
ready for getting paired to a device; The connected device is out of range.
●LED indicator is flashing: The speaker is streaming music via Bluetooth, memory card, USB flash drive, AUX line in or FM tuner.
● LED charging indicator is red: The indicator is red when speaker is charging; It turns off when the speaker is fully charged
Explanation of acoustic signals:
●Switching the playback mode: You will hear an acoustic signal when the playback mode will be changed.
●Maximum volume level reached: If the maximum volume level is reached, you will hear an acoustic signal.
● Low battery warning: If the speaker‘s battery is almost empty you will hear an acoustic warning signal.
Table des matières
