Medeli DD502 Manuel utilisateur

DIGITAL DRUM

Instruction Manual

tempo/tap

Taking Care of Your Digital Drum Set

Thank you for purchasing this digital drum module. The drum module has been

developed to act and play like a drum set but with greater ease. Before you use

the instrument, we recommend you to read through this manual.

Location

Power Supply

Make sure to sure use the suitable AC

adaptor, and also make sure the AC

outlet voltage at your country

matches the input voltage specified

on the AC adaptor`s label.

Turn the power switch OFF when the

instrument is not in use.

An AC adaptor should be unplugged

from the AC outlet if the instrument is

not be used for an extended period of

time.

Unplug the AC adaptor during electric

storms.

Avoid plugging the AC adaptor into

the same AC outlet as appliance with

high power consumption, such as

electric heaters or ovens. Also avoid

using multi-plug adaptors since these

can result in reducing the sound

quality, operation errors, and possibly

damage.

Turn Power OFF When Making

Connections

To avoid damage to the instrument

and other devices to which it is

connected, turn the power switches of

all related device OFF prior to

connecting or disconnecting cables.

Handling and Transport

Cleaning

Electrical Interference

Never apply excessive force to the

controls, connectors or other parts of

the instrument.

Always unplug cables by gripping the

plug firmly, but not pulling on the

cable.

Disconnect all cables before moving

the instrument.

Physical shocks caused by dropping,

bumping, or placing heavy objects on

the instrument can result in scratches

and more serious damage.

Clean the unit with a dry soft cloth.

A slightly damp cloth may be used to

remove stubborn grime and dirt.

Never use cleaners such as alcohol

or thinner.

Avoid placing vinyl object on top of

the unit (vinyl can stick to and

discolor the surface).

This instrument contains digital

circuitry and may cause interference

if placed too close to radio or

television receivers. If this occurs,

move the instrument further away

from the affected equipment.

Do not expose the unit to the following

conditions to avoid deformation,

discoloration, or more serious

damage.

Direct sunlight.

High temperature (near a heat

source, or in a car during the day

time).

Excessive humidity.

Panel Controls

- Front Panel

- Rear Panel

- Side Panel

Setup

- Connect the Pads and the Pedal

- Connect a MIDI device

- Connect a audio equipment

- Connect a CD player, etc.(Aux in jack)

- Connect Headphones

- Connect the Power supply jack

Functions

- Switch the power ON

- Set the main volume

- Select a drum kit

- Play with a Metronome

Creat a User Drum Kit

- Set a drum voice

- Adjust the volume of Pad

- Save your drum kit voices

Voice list

Preset kit list

Song list

MIDI implementation chart

Play a Song

- Select a Song

- Listen to the Song

- Adjust the Song's volume

- Adjust the Song's tempo

- Tap tempo function

- Mute a Drum part

- Play with a Click voice

- Use the lighting guide function

Specifications

Contents

Volume knob

Control the volume of phone and line output.

Turn it clockwise to increase the volume

and anticlockwise to decrease it.

[ save ] button

Save current kit setting to a user kit.

[ start/stop ] button

Start or stop song playing.

[ kit ] button

Display the drum kit number.

[ voice / volume ] button

Display the voice number or volume value.

3-digit LED display

Display the parameters of current menu mode.

[ song / volume ] button

Display the song number or accompaniment

volume value.

[ drum off ] button and indicator

This button is used to turn on or turn off the

percussion of song.

Beat indicator

Beat of metronome or a song is playing

[ click ] button

Turn on or off the metronome.

[ + ] and [ - ] buttons

These buttons are used to change the setting

number of kit, voice, song and adjust the Pad

volume.

Pad select buttons and indicators

Select current pad and adjust the pad volume.

When you press them, the corresponding indicator

lights up.

[ tempo - / + ] and [ tap ] buttons

Change current tempo.

Panel Controls

Front Panel

Trigger input jacks

Connect with pads, cymbals, hi-hat control,

kick trigger.

Output jacks (R, L/mono)

Connect with the amplifier or audio system.

For monaural output use the L/mono jack.

MIDI out jack

Connect with external sound module.

Aux.in jack

Connect with external sound source.

Power supply jack ( DC in 9V)

Connect an AC adaptor to this jack

Power switch

Turn the power on/off

Phones jack

Connect with to a pair of stereo headphones to this jack.

(Connect the headphones will not mute the output jacks.)

Rear Panel

Side Panel

Using the provided cables, connect each Trigger input jack on the rear panel of the module, and make sure each

pad is connected to its corresponding Trigger input jack.

Note:

1. The voice of hi-hat pad hitting is controlled by hi-hat pedal. Similar to a real drum kit, the hi-hat pad functions

as an 'open hi-hat' when the pedal is stepped. When the pedal is released, it functions as a 'closed hi-hat' .

2. The valid striking area of a cymbal pad (ride, crash or hi-hat) is near the edge of the pad, which is different from

other pads.

Caution!

To prevent electric shock and damage to the device, make sure the power is switched OFF

on the drum and all related device before making any connection.

Setup

Connect the Pads and the Pedals

Hi-Hat control pedal/ Kick Trigger

[DD502(S)]

Kick Trigger

[DD502]

to 9 hi-hat

control

to 1 kick

to 7 crash

to 8 hi-hat to 3 tom1 to 4 tom2

to 5 tom3

to 6 ride

to 2 snare

Kick Trigger

[DD502(D)]

Hi-Hat control pedal

[DD502/DD502(D)]

Drum Module

This is for you want to use an external sound module or MIDI

sequencer.

Transmit MIDI Data

1. Use a MIDI cable to connect the MIDI OUT jack on the

drum module with the MIDI IN jack on the external MIDI device.

2. This drum will output all the MIDI codes generated by pads

hitting or pedal stepping via the MIDI output connector. But

clicking and the MIDI codes in songs are excluded.

1. When you want to listen to the voices with an amplifier,

connect amplifiers with the Output L/MONO and R jacks on

the rear panel. (For monaural playback, use the L/MONO jack;

for stereo playback, connect both L/MONO and R jacks.)

2. The volume is adjusted with the VOLUME knob.

1. The audio output of a CD player, or other audio source,

to connect with the AUX IN jack on the rear panel can be

mixed with the sound of the drum. This function is convenient

that lets you play along with a favourite song.

2. The volume of the external signal is adjusted with the

VOLUME knob.

Make sure the power is switched OFF and connect the power

adaptor with the DC IN jack on the rear panel.

Note:

1. To protect the speakers, amplifier and the drum module from

damage, rotate the volume knob to the minimum volume level

before switching the power ON.

2. Make sure the power is switched OFF when connecting drum

module with external devices.

Connect the Power supply jack

MIDI OUT

MIDI Data

MIDI IN

MIDI device

Amplifier Amplifier

An optional set of stereo headphones can be connected with

the PHONES jack located on the side of the drum module.

*Adjust the volume to a comfortable level.

Connect Headphones

Connect a MIDI device

Connect a audio equipment

Connect a CD player, etc.(Aux. In jack)

Functions

After confirming all connection have been completed, rotate the

volume knob to the left ( minimum volume level) before

switching the power on.

Set the power switch to "on" position to switch on the power.

Display shows the song's number and its indicator lights up.

While hitting a pad, gradually rotate the volume knob until a

comfortable volume level is reached.

The unit comes with 20 (001-020) preset drum kits and 10 user

kits (021-030). (Reference song list : page 14.)

1. Press [ kit ] button

The current kit number appears and the Kit indicator lights.

2. Press [ + ] or [ - ] buttons to select the drum kit number

(001 - 020) you want to use.

1. Press the [ click ] button to start the metronome. The beat

indicator is flashing and the click sound begins to play.

2. Press the [ tempo + ] or [ tempo - ] buttons to set the

metronome beat.

3. Press the [ click ] button again to stop the metronome.

Adjust the volume of the click sound

Hold down the [ click ] button and press the [ + ] or [ - ] buttons

to adjust the volume of the click sound, the metronome

automatically play.

*When playing the metronome:

The metronome stops immediately when holding down [ click ] button,

and pressing the [ + ] or [ - ] buttons on the click sound.

*Volume of the click sound will be reset to default once

power is on.

Song indicator

Kit indicator

Switch the power ON

Set the main volume

Select a drum kit

Play with a Metronome

Beat indicator

Play a Song

This drum module has a total of 50 preset songs.

Note: The preset song setting is 001 after you slide on power.

1. Press [ song / volume ] button.

The song indicator lights and the current song's number appears.

2. Press [ +] or [ - ] button to select one of the song and listen to it.

Song numbers 001 - 050 are preset songs.

(Reference song list : page 14.)

1. Press [ start/stop ] button and the beat indicator is flashing.

After the counting, the song will start playback from the

beginning.

2. The song will stop when it reaches the end.

You can stop the song during playback by pressing the

[ start/stop ] button

* The ASSIGN pad's indicator flashes at the first beat of each

measure

Note: The ASSIGN pad's indicator can be lighted off by pressing

both [hi-hat] and [kick] button at the same time.

Song indicator

1. Press the [ song / volume ] button to select the volume of

song. Display shows : " A XX".

(XX = level value, 00 to 31)

2. Press [ + ] or [ - ] button to adjust the volume of song

accompaniment.

1. Press the [ tempo + ] or [ tempo - ] button. D

[ tempo + ] or [ tempo - ] button to increase or

decrease the tempo. ( tempo value in the range or 30 to 280)

isplay shows

the current tempo value.

2. Press the

Holding down either a [ tempo +] or [ tempo - ] button to

change the setting in a high speed.

*Press [ tempo + ] and [ tempo - ] buttons at the same time

to reset the tempo to default value.

Note: About 2 seconds after you stop pressing the [Tempo]

button, display changes to show your selected song or kit

number instead of tempo value.

Select a song

Listen to the song

Adjust the song's volume

Adjust the song's tempo

Beat indicator

tempo/t ap

This function allows you to set the song's tempo by tapping

in tempo on a pad.

1. Press the [ tap ] button. Display shows the current tempo

value.

2. Tap on the pad in the tempo that you want to get.

Tap on the pad 4 times. The last two beats are only

detected and are set as your desired speed.

3. The song will be played with your desired tempo you set.

When the song is playing, you are not allowed to change

the tempo with this tempo function.

* Any pads can do the tap tempo function.

Tap tempo function

1. Press [ drum off ] button. The drum off indicator lights.

The drum mute function is active.

2. Press [ start/stop ] button to playback the song. The drum part

in the song will be muted.

3. To cancel the drum mute function, press [ drum off ] button

again. The drum off indicator light goes off.

*The drum mute function can be used during song playing.

1. Press the [ click ] button to start the metronome. It will be

played with tempo.

2. Press the [ click ] button again to stop the metronome.

Note: The click voice will not stop automatically once the song

finished until you press the [ click ] button.

The lighting guide function provides you a valuable lesson to

practice or learn the drum kit with playing the preset song.

1. Select the song number you want to practice.

2. Press [ drum off ] button.

3. Press [ start/stop ] button to start song play.

4. Strike the pad in accordance with the lighting of pad's

indicators or press the hi-hat pedal and kick the bass drum

pad exactly when their indicators light.

*During song playing, you can change the Tempo(speed),

or use the tap tempo function to set your desired tempo.

Drum off indicator

Mute a Drum part

Play with a the Click voice

Use the lighting guide function

* Press the [ hi-hat control ] + [ kick ] buttons

to turn off all the pad's indicator. Press the

[ hi-hat control ] + [ kick ] buttons again to

turn on all the pad's indicator.

tempo/t ap

Table des matières