Meco 333 Manuel utilisateur

333 : 28-09-2012

4

Features :

1. 4-20mA (1KV load, 24V Loop Supply)

2. 0-100.00mV,0-1.000V, 0-12.000V

3. K, J, E, T Thermocouple ( 0C and 0F)

4. Frequency 1-62500 Hz

5. 0.025% Basic Accuracy

6. Easy Key-pad Operation

7. Easy step and Auto Ramp Functions

8. 0-20mA, 0-24mA selectable

9. 0-100% Output (mA, mV, V)

10. Beeper warning when output is open(mA) or short

(mV,V)

3

Table of Contents

I. PANEL DESCRIPTION ......................................................... 1

II. OPERATING INSTRUCTION .............................................. 6

1. mA OUTPUT .......................................................... 6

1a. Geneal Operation 4-20mA .................................... 6

1b. Select 0- 20mAor 0 -24mA .................................... 7

1c. Enter a value less than 1 ....................................... 8

2. mV, V OUTPUT ............................................................ 9

2a. General Operation 0 -100mV ................................ 9

2b. Select 0 -1V or 0 -12V ......................................... 10

2c. Enter a value less than 1 ..................................... 11

3. HZ, FREQUENCY OUTPUT ..................................... 12

4a. General Operation ............................................... 13

4b. Select 0C or 0F ...................................................... 15

4c. Select K, J, E, or T type Thermocouple .............. 17

4d. Enter a Negative Temperature ............................ 18

5. % OUTPUT IN THE mA, mV, V FUNCTIONS ......... 19

6. EASY STEP IN THE mA, mV AND V FUNCTIONS . 21

7. AUTO RAMP IN THE mA, mV AND V FUNCTION .. 23

8. HOW TO GET NEGATlVE OUTPUT ........................ 26

III. ELECTRICAL SPECIFICATION ...................................... 27

IV. USE THE DC ADAPTOR ................................................. 32

V. USE EXTERNAL BATTERY PACK ................................ 33

Vl. BATTERY REPLACEMENT ............................................ 34

MULTIFUNCTION

PROCESS CALIBRATOR

MODEL : 333

®

USER MANUAL 2

1

1. Panel Description

1. LCD DISPLAY

2. THERMOCOUPLE SOCKET

3. ON/OFF BUTTON

4. SHIFT BUTTON

5. FUNCTION SELECT SWITCH

6. NUMERICAL & FUNCTION KEYPAD

7. STAND

8. AC ADAPTOR INPUT SOCKET

9. OUTPUT LEADS

333 : 28-09-2012

8

7

6

5

1. mVAHz : Units

2. 04-204mA : Range of mA

3. % : Percentage

4. JKET : Thermocouple type

5. : Ramp

6. OPR : Operate, Output, Normal

7. OL : Overload, Output, Abnormal

8. STBY : Standby, Internal Calibration in Progress

9. SHIFT : Select SHIFT function

10. : Battery Low

1.

Press SHIFT button, and then press one of these buttons to

select desired mA range

2.

Press SHIFT button, then press this button to select desired mV

or V range

3.

Press SHIFT button, then press this button to select 0C or 0F

4.

Press SHIFT button, then press this button to select desired

type of thermocouple.

5.

Press SHIFT button, then press this button to perfarm

auto-ramp function. To stop the auto-ramp function, press this

button again

6.

Press this button to enter negative temperature. Or press

SHIFT button, then press this button first to enter percentage

in the mA, mV, and V functions.

7.

While the calibrator is in the SHIFT mode, and the percentage

is entered, press this

button to increment%.

8.

Always press this button to complete the entry of numbers.

333 : 28-09-2012

12

11

10

9

II. Operating Instruction

1. mA Output

1a. General Operation 4- 20mA

1. Turn the power on, and wait until the STBY symbol

disappears (about 1 min.)

2. Plug the test leads into the output connector of

calibrator accordingly (Black to black, red to red),

Attach alligator clip if necessary.

3. Move the sliding switch to mA position

4. Press the keypad (including the decimal point) to

enter the value of mA directly.

5. Using the test leads or alligator clips, touch or clip on

the terminals to be calibrated.

Note : Always waits until STBY (standby) symbol in the LCD

disappears before any operation.

Note : Maximum 5 digits can be entered. If users enter less than

5 digits (1 to 4digits), users must press ENTER button to indi-

cate the end of entry. If users enter 5 or more digits, calibrator

will automatically end the entry and output specified value cur-

rent.

1b. Select 0-20mA or 0-24mA

The default setting for mA function is 4 - 20mA. But users

can select 0 - 20mA or 0 - 24 mA by pressing the SHIFT

button to enter the SHIFT mcde. Then press the NUMBER

2 or NUMBER 3 button to select desired DC current range.

After desired range is selected, press the shift button to

exit the SHIFT mode. Corresponding current range symboI

wili be displayed in the LCD.

1c. Enter a value less than 1

In the mA functions, the standard way to enter a value

less than 1 is to press leading 0 before pressing the

decimal point Though the decimal point can be entered,

the decimal point will not be shown in the LCD.

2. mV,V Output

2a. General Operation 0-100mV

1. Turn the power on and wait until the STBY symbol

disappears (about 2 min.).

2. Plug the test leads into the output connectors of

calibrator accordingly (Black to black, red to red).

Attach alligator clip if necessary.

3. Move the sliding switch to mV, V position

4. Press the keypad (including the decimal point) to

enter the value of mV directly.

5. Using the test leads or alligator clips, touch or clip on

the teminals to be calibrated.

Note : Always wait until STBY (standby) synbol in the the LCD to

disappear before any operation.

Note : Maximum 5 digits can be entered. If users enter less than 5

digits ( 1 to 4 digits), users must press ENTER button to indicate

the end of entry. If users enter 5 of more digits, calibrator will

automatically end the entry and output specified value voltage.

333 : 28-09-2012

2b. Select 0 -1V or 0-12V

The default setting for mV, V function is 0 - 100.00mV. Users

can select 0 - 1.0000V or 0 -12.000V by pressing the SHIFT

button to enter SHIFT mode. Then press the NUMBER 4

button repeatedly to select desired DC voltage range. After

desired range is selected, press the SHIFT button again to

exit the SHIFT mode. Corresponding voltage range symbol

will be displayed in the LCD.

16

15

14

13

2c. Enter a value less than 1

In the mV/V functions, the standard way to enter a value less

than 1 is to press the leading 0 before pressing the decimal

point. Though the decimal point can be entered first, the

decimal point will not be shown in the LCD.

3. Hz, Frequency Output

1. Turn the power on, then plug the test leads into the

output connectors of calibrator accordingly (Black to

black, red to red). Attach alligator clip if necessary.

2. Move the sliding switch to Hz position

3. Press the keypad (excluding the decimal point) to enter

the value of Hz directly.

4. Using the test leads or alligator clips, touch or clip on the

terminals to be calibrated.

5. Because not all the frequencies are available between

126 to 62500Hz, calibrator will automatically adjust and

display the users input value to a frequency, which is

available and atways larger or equal to users input.

Note : The resolution of Hz funcfion is 1 Hz. For the range 1 -

125Hz, all the frequencies in between are available. But for the

range 126 - 62500Hz, not all the frequencies are available (total

604 frequencies available). Please refer to section III Electrical

Specifications for available frequencies.

4. Thermocouple Calibration of 0C, 0F

4a. General Operation

1. Turn the power on, and wait until the STBY symbol

disappears (about1 min.).

2. Plug the corresponding connector (K- type connector

for K- type thermocouple, J- type connector for J-type

thermocouple, ...) into TC terminals of calibrator and

thermometer to be calibrated.

3. Move the sliding switch to 0C, 0F position

4. Press the keypad (including the minus - button) to

enter the value of Temperature directly.

333 : 28-09-2012

4b. Select 0C or 0F

User can select 0C or 0F by pressing the shift button to enter

SHIFT mode. Then press the NUMBER 5 button repeatedly to

select desired temperature unit. After desired unit is selected,

press the SHIFT button again to exit the SHIFT mode.

Corresponding temperature 0C or 0F symbol will be displayed in

the LCD.

20

19

18

17

Note : Users can plug the connector into the TC terminals of

calibrator even before the power is turned on for better thermal

equilibrium between the TC terminal and thermocouple connector.

Note : Only in the 0C and 0F functions, the negative values are

allowed to be entered. To enter negative temperature, press the

minus “-” button first.

Note : Maximum 4 digits (including the “-” sign) can be entered.

If

users enter less than 4 digits (1 to 3 digits), users must press

ENTER button to indicate the end of entry. If users enter 4 or

more digits, calibrator will automatically end the entry and output

specified value of temperature.

4c. Select K, J, E, or T type Themocouple

Users can select K, J, E or T type Themocouple by pressing the

shift button to enter SHIFT mode. Then press the number 6 button

repeatedly to select desired type of themocouple. After desired

type is selected, press the shift button again to exit the SHIFT

mode. Corresponding thhemocouple type (K, J, E or T) symbol

will be displayd in the LCD.

333 : 28-09-2012

4d. Enter a Negative Temperature

The resolution of temperature is 1 degree, so the decimal

point is used a minus “-” sign. to enter a negative temperature,

press the “-” button first.

24

23

22

21

5. % Output in the mA, mV, V function

In the mA, mV, or V function, users can enter percentage.

To enter percentage (%)

1. Users press the shift button first then SHIFT symbol will

be displayed in the LCD.

2. Press % button first, then press the number (no decimal

number, the % resolution is 1%).

3. After percentage is entered, the percentage will be

displayed in the upper LCD, and the corresponding value

will be displayed in the lower LCD.

4. The corresponding value is calculated based upon the

range selected.

4-20mA : 1% = 0.16mA

0-20mA : 1% = 0.2mA

0-24mA : 1% = 0.24mA

0-100mV : 1% = 1mV

0-1V : 1% = 0.01V

0-12V : 1% = 0.12V

5. To exit the percentage-output mode, press the SHIFT

button again.

6. After the SHIFT button is pressed, the upper LCD will

become blank, while the lower LCD remains its last value.

6. Easy Step in the mA, mV, and V Functions

While the percentage is entered and calibrator is still in the SHIFT

mode, users can step up or down by the percentage entered.

The maximum percentage is 100% while the minimum percentage

is 0%. If the next step up or down exceeds the maximum or

minimum percentage, the percentage will stay in the previous step.

Example 1 : Step Up and Down (25%) :

25% -> 50% -> 75% -> 100% -> 75% -> 50% -> 25% -> 0% ->

25%

Example 2 : Step Up and Down (30%) :

30% -> 60% -> 90% -> 60% -> 30% -> 0% -> 30%

333 : 28-09-2012

25 26

28

27

7. Auto Ramp in the mA, mV, and V functions

In the mA, mV, and V function, auto ramp function is available to

the users. To start the ramp function :

1. Press the SHIFT button to enter the SHIFT mode.

2. Press the NUMBER 7 key to starl

3. Ramp function increment from 0% to 100%, then

decrements from 100% to 0% repeatedly. The resolution

of each step is 1% (with respect the range selected) at

an interval of 0.08 seconds. So it takes 8 seconds to

ramp from 0 to 100%.

4. To temporarily stop the ramp function, press the

NUMBER 7 key, and the output will stay at the value

when the NUMBER 7 key is pressed. These features

will facilitate the checking of trigger point of tested device,

such as valve controller.

5. To restart again, press the NUMBER 7 button again.

6. To return to the regular output mode, press the SHIFT

button again when ramp function is stopped.

Note : Do not press any button while the calibrator is performing

the ramp function (except NUMBER 7 button to stop the ramp

function).

333 : 28-09-2012

8. How to Get Negative Output

If negative output (mA, mV, or V) is needed, users can achieve

it by interchange the connectian of test leads.

III. Electrical Specification (23 C ± 5*C, 5 minutes after

power is on)

mA DC Current (1KVMax. Load, 24V Loop Supply)

Range Resolution Accurancy

4-20mA, 0-20mA, 0-24 mA 1mA ±0.025%±3mA

Beeper warning when output is open and specified current

output > 1mA

mV, V DC Vallage (1mA Supply Current)

Range Resolution Accurancy

0 - 100.00mV 10mV ±0.05% ±30mV

0 - 1.0000V 100mV ±0.05% ±300mV

0 - 12.000V 1mV ±0.05% ±3mV

Beeper waming when output is short and specified voltage

output > 10mV

K, J, E, T type Thermocouples (10C,10F Resolution, 1KVload

Min.)

Range Accuracy Range Accuracy

K : -200 to -100 0C ±2.00C K : -328 to -1480F ±3.60F

K : -100 to 0 0C ±1.10C K : -148 to 320F ±1.80F

K : 0 to 1370 0C ±0.80C K : 32 to 24000F ±1.50F

J : -100 to 0 0C ±0.90C J : -148 to 320F ±1.60F

J : 0 to 760 0C ±0.70C J : 32 to 14000F ±1.20F

E : -100 to 0 0C ±0.90C E : -148 to 320F ±1.60F

E : 0 to 700 0C ±0.70C E : 32 to 12920F ±1.20F

T : -200 to 0 0C ±1.00C T : -328 to 320F ±1.80F

T : 0 to 400 0C ±0.80C T : 32 to 7520F ±1.50F

Frequency (1-125Hz, 1KVLoad Min.)

Range Resolution Accurancy

1-125 Hz 1 Hz ± 0.04 Hz

Available Frequencies

(126-62500Hz, Accuracy± 0.01%+ 0.04Hz, 1KVLoad Min) :

126.00

134.12

142.04

150.24

158.62

166.22

174.58

182.74

191.71

201.61

212 58

224.82

238.54

254.06

271.73

292.05

315.65

343.40

376.50

416.66

466.41

498.00

514.40

531.91

550.66

127.03

135.28

143.34

151.69

159.43

167.11

175.56

183.82

192.90

202.92

214.04

226.44

240.38

256.14

274.12

294.81

318.87

347.22

381.09

422.29

473.48

500.00

516.52

534.18

553.09

128.07

136.45

144.00

152.43

160.25

168.01

176.55

184.91

194.09

204.24

215.51

228.10

242.24

258.26

276.54

297.61

322.16

351.12

385.80

428.08

480.76

502.00

518.67

536.48

555.55

129.13

137.06

145.34

153.18

161.08

169.83

177.55

186.01

195.31

205.59

217.01

229.77

244.14

260.41

279.01

300.48

325.52

355.11

390.62

434.02

488.28

504.03

520.83

538.79

558.03

130.20

138.27

146.02

154.70

162.76

170.76

178.57

187.12

196.54

206.95

218.53

231.48

246.06

262.60

281.53

303.39

328.94

359.19

395.56

440.14

490.19

506.07

523.01

541.12

560.53

131.30

139.50

147.02

155.47

163.61

171.70

179.59

188.25

197.78

208.33

220.07

233.20

248.01

264.83

284.09

306.37

332.44

363.37

400.64

446.42

492.12

508.13

525.21

543.47

563.06

132.41

140.13

143.10

156.25

164.47

172.65

180.63

189.39

199.04

209.73

221.63

234.96

250.00

267.09

286.69

309.40

336.02

367.64

405.84

452.89

494.07

510.20

527.42

545.85

565.61

133.54

141.40

149.52

157.03

165.34

173.61

181.68

190.54

200.32

211.14

223.21

236.74

252.01

269.39

289. 35

312.50

339.67

372.02

411.18

459.55

496.03

512.29

529.66

548.24

568.18

30

29

570.77

592.41

615.76

641.02

668.44

698.32

730.99

766.87

806.45

850.34

899.28

954.19

1000.00

1068.37

1146.78

1237.62

1344.08

1470.58

1623. 37

1811.59

1976.28

2040.81

2109.70

2183.40

2262.44

2347.41

2439.02

2538.07

2645.50

2762.43

2890.17

3030.30

3184.71

3355.70

3546.09

3759.39

573.39

595.23

618.81

644.32

672.04

702.24

735.29

771.60

811.68

856.16

905.79

961.53

1008.06

1077.58

1157.40

1250.00

1358.69

1488.09

1644.73

1838.23

1984.12

2049.18

2118.64

2192.98

2272.72

2358.49

2450.98

2551.02

2659.57

2777.77

2906.97

3048.78

3205.12

3378.37

3571.42

3787.87

576.03

598.08

621.89

647.66

675.67

706.21

739.64

776. 39

816.99

862. 06

912.40

968. 99

1016.26

1086.95

1168.22

1262.62

1373.62

1506. 02

1666.66

1865.67

1992.03

2057.61

2127.65

2202.64

2283.10

2369.66

2463. 05

2564.10

2673.79

2793.29

2923.97

3067.48

3225.80

3401.36

3597.12

3816.79

578.70

600.96

625.00

651.04

679.34

710.22

744.04

781.25

822.36

868.05

919.11

976.56

1024.59

1096.49

1179.24

1275.51

1388.88

1524.39

1689.18

1893.93

2000.00

2066.11

2136.75

2212.38

2293.57

2380.95

2475.24

2577.31

2688.17

2808.98

2941.17

3086.41

3246.75

3424.65

3623.18

3846.15

581.39

603.86

628.14

654.45

683.06

714.28

748.50

786.16

827.81

874.12

925.92

984.25

1033.05

1106.19

1190.47

1288.65

1404.49

1543.20

1712.32

1923.07

2008.03

2074.68

2145.92

2222.22

2304.14

2392.34

2487.56

2590.67

2702.70

2824.85

2958.57

3105.59

3267.97

3448.27

3649.63

3875.96

584.11

606.79

631.31

657.89

686.81

718.39

753.01

791.13

833.33

880.28

932.83

992.06

1041.66

1116.07

1201.92

1302.08

1420.45

1562.50

1736.11

1953.12

2016.12

2083.33

2155.17

2232.14

2314.81

2403.84

2500.00

2604.16

2717.39

2840.90

2976.19

3125.00

3289.47

3472.22

3676.47

3906.25

586.85

609.75

634.51

661.37

690.60

722.54

757.57

796.17

838.92

886.52

939.84

----------

1050.42

1126.12

1213.59

1315.78

1436.78

1582.27

1760.56

1960.78

2024.29

2092.05

2164.50

2242.15

2325.58

2415.45

2512.56

2617.80

2732.24

2857.14

2994.01

3144.65

3311.25

3496.50

3703.70

3937.00

32

31

589.62

612.74

637.75

664.89

694.44

726.74

762.19

801.28

844.59

892.85

946.96

----------

1059.32

1136.36

1225.49

1329.78

1453.48

1602.56

1785.71

1968.50

2032.52

2100.84

2173.91

2252.25

2336.44

2427.18

2525.25

2631.57

2747.25

2873.56

3012.04

3164.55

3333.33

3521.12

3731.34

3968.25

333 : 28-09-2012

4000.00 4032.25 4065.04 4098.36 4132.23 4166.66 4201.68 4237.28

4273.50 4310.34 4347.82 4385.96 4424.77 4464.28 4504.50 4545.45

4587.15 4629.62 4672.89 4716.98 4761.90 4807.69 4854.36 4901.96

4950.49 5000.00 5050.50 5102.04 5154.63 5208.33 5263.15 5319.14

5376.34 5434.78 5494.50 5555.55 5617.97 5681.81 5747.12 5813.95

5882.35 5952.38 6024.09 6097.56 6172.83 6250.00 6329.11 6410.25

6493.50 6578.94 6666.66 6756.75 6849.31 6944.44 7042.25 7142.85

7246.37 7352.94 7462.68 7575.75 7692.30 7812.50 7936.50 8064.51

8196.72 8333.33 8474.57 8620.68 8771.92 8928.57 9090.90 9259.25

9433.96 9615.38 9803.92

10000.00 10204.08 10416.66 10638.29 10869.56 11111.11 11363.63 11627.90

11904.76 12195.12 12500.00 12820.51 13157.89 13513.51 13888.88 14285.71

14705.88 15151.51 15625.00 16129.03 16666.66 17241.37 17857.14 18518.51

19230.76 20000.00 20833.33 21739.13 22727.27 23809.52 25000.00 26315.78

27777.77 29411.76 31250.00 33333.33 35714.28 38461.53 41666.66 45454.54

50000.00 55555.55 62500.00

General Specification :

Battery Type

Power Consumption

Display

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidky

Dimension

Weight

Accessories

: 9V Alkaline Battery

: 60mA - 180mA (depends on output)

: 4 and 5 Digits

: 0 to 50’C( 32 to 122 ‘F)

: Less than 85% relative

: -20 to 60’ C (-4 to 140 ‘F)

: Less than 85% relative

: 88 x 168 x 26 mm (approx.)

: 330gms including battery (approx.)

: Carrying case x 1

Instruction Manual x 1

K type thermocouple connector x 1

External Battery Pack Holder x 1

1.5V AA Batteries x 6

9V Battery (installed) x 1

Pair of Aligator Test leads x 1

IV. Use the DC adapter

If long term usage of the calibrator is required, DC adapter can

be used. The 12V DC terminal is located in the back of the

clibrator. The voltage should be regulated between 9 to 15V

V. Use Extermal Battery Pack

An external battery pack in included for a longer period usage.

The external battery pack needs to be packed with 6 pieces of

1.5 volts AA batteries. To use the external battery pack, plug into

the DC terminals located in the back of the calibrator.

36

35

34

VI. Battery Replacement

When the low battery symbol is displayed on LCD, follow the

following prodedures to replace the battery.

1. Turn off the calibrator by pushing the On/Off button.

2. Remove the screw of the battery compartment cover and

remove the battery compartment cover.

3. Replace the old 9V battery with a new alkline 9V battery.

4. Place the battery compartment cover and fasten the

screw.

Note : In the mA, mV, V, 0C and 0F funtions, status of low battery is

detected. While in the Hz function, status of low battery is not

detected.

33

333 : 28-09-2012

40

37

38

39

®

Certificate of Calibration

We hereby certify that this product has been

calibrated and found to be in accordance

with the applicable SPECIFICATIONS and

STANDARDS.

Accuracies of the standard equipment used in

this calibration are traceable to the National

Standards.

SR. NO. :

CHECKED BY :

DATE :

MODEL NO. :

MECO METERS PVT. LTD.

Plot No. EL-60, MIDC Electronic Zone, TTC Industrial

Area, Mahape, Navi Mumbai - 400710 (INDIA)

Tel : 0091-22-27673311-16, 27673300 (Board)

Fax : 0091-22-27673310, 27673330

E-mail : [email protected]

Web : www.mecoinst.com

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

N O T E

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

N O T E

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

N O T E

Meco 333 Manuel utilisateur

Manuels Multimètre populaires d'autres marques