English English
- Instructions to Steaming Use
1. The ironing plate supports 90-degree rotation and can be adjusted by pressing the
spin button. See the figure below for details.
2. Install its anti-scalding board or brush.
3. Connect the power supply and press the power switch for 5 seconds to start your
steamer. Adjust the temperature to 180/200 degrees Celsius (356/392 Fahrenheit),
when the temperature indicator stops flashing, you can press the steam button to start
steaming. (Steaming function is available only at 180/200℃ (356/392°F).)
4.There are three types of steam flows adjustable by clicking the button for steam flow
to adjust it as needed. Then, press the steam switch and you can begin steaming.
Operation Methods:
When steaming, straighten the clothes to be steamed with one hand, hold the garment
steamer with the other hand, let the steam outlet close to your clothes and move the
garment steamer up and down repeatedly, especially for thicker clothes.
5. When the steamer is not in use, it can be rested on its base. To fill the water tank,
please place your steamer vertically on its base. If tilted, the water may drip from the
cover edge when the water level is too high.
After use, please press the power switch for 5 seconds to turn off the garment steamer
or unplug its power supply. Pour out the water remaining in the water tank and store the
electric steamer properly until it has completely cooled down.
Note: In order to avoid damages to your clothes
and ironing plate, please do not allow
the sprinkler to remain immobile atop the
same place for more than 30 seconds..
For a garment steamer, after long-term use of tap water, scale will accumulate in the
steam chamber. To reduce scale formation , you can use filtered water, mineral water or
distilled water. As recommended, you should remove the water scale at least twice a
year as follows:
1. For maintenance, unplug the power supply, let it cooled completely and then add
vinegar diluted with water into the water tank (according to the proportion - white
vinegar: water = 1:2);
2. Connect the power supply, turn on the steam switch after the garment steamer has
been heated enough, let it jet steam for about 5 minutes continuously and then turn off
the steam switch;
3. Pour out the vinegar water remaining in the tank. Rinse the tank with clean water until
there is no smell of vinegar. 1 hour later, you can fill it with clean water for reuse.
1. When cleaning the garment steamer brush/electric steamer, please make sure that it
has cooled completely. Clean it with a wet cloth. If necessary, use a neutral detergent.
Never use any strong detergent.
2. If a paste or other residue forms on the baseplate, it can be easily wiped clean with a
wet cloth. Do not use metal sheets to clean it to avoid scratching the smooth surface.
Also, avoid placing the electric steamer on any rough surface. If you steam synthetic
fabric at high temperature, it may not only damage the fabric, but also stain the baseplate
with fabric residues. In this case, it is best to place an old cloth over your clothes before
ironing.
3. Store this product on a dry horizontal surface. When not in use, disconnect its power
supply, drain the water in the water tank and assure no water drops are left on or in the
iron.
Ⅶ. Water Scale Removal
Ⅷ. Storage and Maintenance of Hand-held Garment
Steamer
Press the
button down
The body rotates
leftwards for 90 degrees
-5- -6-
