McLelland MAP-1200PRE Manuel utilisateur
6 Source /6 Zone Multi-room
Controller
MAP-1200PRE
OWNERS MANUAL
POWER
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6
MAP-1200PRE
6 SOURCE/6 ZONE MULTIROOM CONTRO LLER
2
3
McLELLAND MAP-1200PRE is a functional 6x6 matrix controller,
easy-to-install, highly compatible, expandable and used-friendly audio
distribution system. With few simple steps to install, it provides up to 18 zones
which all can be controlled by packaged keypads or IR remote controller.
Six line-level inputs are provided where to any line-level music source such as a
CD-player, Tuner, MP3 player, smartphone or other devices can be connected.
An Optical digital input to manage the sound of a flat screen or a CD player to
have high resolution of sound quality to each output zone.
Simply determine the different output power of amplifiers to suit the demand
of each output zone, so every audiophile in every zone can use IR controller or
keypads to enjoy the powerful audio. High functionality and performance bring
you musical enjoyment just the way you want it.
* 6 Line input sources, including RCA, Stereo 3.5mm and OPTICAL.
* Provides 6 output zones.
* Keypad to control each output zone.
* Enable control over Ethernet TCP/IP.
* RJ45 Ethernet port for the wired connection to the local network.
* Another RJ45 Ethernet expansion port for connecting with smart TV or other
device.
* RS-232 port allows 2-way communication with the Home Automation system.
* Built-in IR receiver & IR remote controller for Source
select/Volume/Treble/Bass.
* 12V DC trigger output to external device when the zone is power on.
* Expandable up to 18 Zones by additional 2 units.
* 6 LEDs for 6 zones Power On, Standby and Mute.
INTRODUCTION
4
SPECIFICATION
PACKAGE CONTENTS
S/N Ratio
THD
Frequency Response
Input Impedance
Input Sensitivity
Crosstalk
Output Impedance
Output Level
Trigger Out Voltage
Infrared Frequency
Input Connectors
Output Connectors
Network Connector
Power Supply
Power consumption
Dimensions
Weight
-110dB
0.05% (1V)
20Hz - 20KHz (-0.5dB)
>47 K Ohms
1V
-75dB (@1kHz)
100Ohms
3V
DC +12V
38kHz
RCA, 3.5mm stereo, OPTICAL
Terminal Block
RJ-45, Standard 10/100Mb
DC 15V/1.6A
24 W, Max.
440 mm x 44 mm x 196 mm (WxHxD)
2Kgs
* 6x6 Controller
* Rack Mounting Ears – 2 (Installed on Controller)
* Terminal Blocks – 12 (Installed on Controller)
* External Adaptor
* User Manual
There is an optional package for additional accessory, including:
* Remote Control
* Expansion Ribbon Cable
* Keypad Connection Hub and Decora Wall-plate
* PoE Keypads with built-in IR RX and Decora Wall-plates – 6
If these optional package is needed, please contact your local dealer.
5
POWER
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6
MAP-1200PRE
6 SOURCE/6 ZONE MULTIROOM CONTRO LLER
FRONT PANEL
REAR PANEL
1. Power ON/OFF/ STANDBY
Depress the power button to turn on the
system. Press it again to release the latch
and power the unit off.
Note that even the Master Controller is
powered on, each zone will remain in
Standby mode until the zone
keypad is activated.
1. PRE-AMP OUTPUT
Stereo Line level output on each zone.
Connect to the input of amplifiers or
powered speakers.
2. SOURCE INPUTS
Source1~3 : RCA Stereo Input
Source4~5: 3.5mm Stereo Input
Source6: OPTICAL Digital Input
3. TRIGGER OUTPUT
When the zone is activated, the
corresponding jack will output 12VDC to
trigger other device.
4. IR EMITTER
IR Outputs to control sources
5. KEYPAD
RJ-45 jack Connects to the keypad hub
for 6 keypads.
6. MASTER/SLAVE SWITCH
Set the unit ID when connecting multi
Controller systems
2.Standby/Zone ON LED
These six LEDs illuminate to indicate the
status of each zone.
Blue: In Standby mode.
White: In Activate mode.
Blue/White: In Mute mode.
1
2
1
2
3 4 5
6
7 8
10
1211
9
7. AGC
Automatic Gain Control, brings low level up to a
present-level.
8. ETHERNET/RS232 SWITCH
ETHERNET: When the amplifier connects to
Ethernet.
RS232: When the amplifier control by PC or
Control Device via RS-232 port.
9. ETHERNET PORTS
Dual LAN ports, one connects to the LAN port of
local router. Another connects to network
TV or other device which requires Ethernet.
10. RESET
The RESET button is used to reset the
ETHERNET back to factory default settings.
11. EXPANSION IN/OUT PORT
Expandable to 18 zones with 3 x Multi-zone
Controller systems.
12. DC INPUT
Connect the supplied DC adapter to the DC IN
jack, and then plug it into a standard household
outlet
6
1
3
5
6
7
2
7
4
7
1
7
2
5
6
3
4
3
The MAP-1200PRE provides 6 x stereo unbalanced line level source inputs
which can be accessed by any zone. Inputs 1~3 provide RCA jacks for
connecting the audio sources with RCA outputs.
Inputs 4 and 5 provide inputs on 3.5mm stereo jacks and input 6 also provides
one Digital Optical input for digital source like TV ARC, DVD and CD players or
cable/ satellite boxes.
Always use good quality shielded RCA cables to connect sources to the
MAP-1200PRE and keep RCA cables as short as possible to avoid RF interfere.
8
MAP-1200ED
RCA 3.5mm Stereo
controller
The MAP-1200PRE comes with 6 POE enabled keypads. This allows for source
control from each specific zone as well as IR routing to the appropriate source
devices once selected. The MAP-1200PRE also comes with a hub that allows for
all 6-keypads to be connected to the amp via Cat5e/6.
9
ZONE-1
ON ON OFF
1 2 3
ZONE-2
ON ONOFF
1 2 3
ZONE-3
ON OFFOFF
1 2 3
ZONE-4
ONONOFF
1 2 3
ZONE-5
ON OFFOFF
1 2 3
ZONE-6
ONOFFOFF
1 2 3
There are two Infrared (IR) emitter outputs on the rear panel. These outputs are
used to control the connected source components remotely through the
MAP-1200PRE IR system.
For example, connect an IR emitter to IR Emitter output jack of the controller,
and then connect the flasher to the IR receiver window on one of connected
sources. Now you can use the source remote control in any zone and control
your source through the keypads remotely. The keypad should have the
corresponding source selected for the IR to work. Repeat this for another
Infrared (IR) enabled sources for complete IR source control.
10
Source 2-DVD
IR Emitter from
Source 2 port
Power
IR Signal
Grounding
IR +
IR -
FRONT BACK
reserved for cascading units
INFRARED EMITTER OUTPUTS
Table des matières
