McIntosh ST27 Manuel utilisateur

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549

ST27 Assembly Instructions

Important Information

Caution: The XR27 Column weight is 84 pounds (380kg) net.It

requires two or more persons to safely handle.

Assembly Instructions

It is recommended that the Professionals at your McIntosh

Dealer, who are skilled in all aspects of installation and

operation, install the XR27 Loudspeaker System and any

associated audio equipment. Refer to page 7 of the XR27

Owner’s Manual along with the information below:

Unpacking the Column

1. Remove the banding material from the shipping carton

and lift off the top of the shipping carton and set it

aside.

2. Lift up on the rear of the Loudspeaker System Col-

umn, near the foam packing material at both ends.

Place the entire Loudspeaker Assembly (Column,

Grille and foam packing material) next to the bottom

shipping carton on a flat surface.

3. Release the Loudspeaker Grille from the packing ma-

terial by opening the slit in the packing material lo-

cated on the top center. Remove the Loudspeaker

Grille from the protective shipping wrap and set it

aside.

4. In a similar manner, lift out the Loudspeaker System

and set it aside.

5. Replace the shipping carton top onto the shipping car-

ton bottom. Take the two center pieces of the just re-

moved packing material and lay it down flat onto the

top of the shipping carton.

6. Carefully remove the protective shipping bag(s) from

the Loudspeaker System so as not to mar the Column

Finish or damage the Loudspeaker Drivers.

7. Place the Loudspeaker System on top of the packing

material located on top of the shipping carton making

sure to align the Bottom End to the end of the shipping

carton. Refer to figure 1.

Unpacking the Column Base

8. Locate and remove the bags of hardware, screws with

washers and Allen Wrench Tool taped to the top of the

foam packing material.

9. Lift and remove the Column Base from the packing

material and remove it from the plastic bag.

Figure 1

Tiptoes Glides

Figure 2

Assembling the Column

10. Using the supplied Allen Wrench, remove two screws

from each side of the Loudspeaker Bottom. Refer to

figure 1.

11. Remove the Front Cover from the Column Base and

set it aside.

12. Orient the Column Base so the metal extrusion lines

up with the Loudspeaker System extrusion.

13. Attach the Column Base to the Loudspeaker System

using the four supplied machine bolts and washers.

Refer to figure 1.

14. Align the Grille fastening pins to the Column Grom-

mets (there are four pins on each side). Carefully

push down to secure the Grille to the Loudspeaker.

15. Reattach the previously removed Front Cover to the

Column Base.

Optional Feet

16. One set of optional feet (eight Tiptoes and eight

Glides) are supplied with the ST27 Column Base. To

prevent crushing carpet use

the Tiptoe Spikes; to protect

non-carpeted flooring use

the Chrome Glides. Both the

Glides and Tiptoes have a

threaded shaft and locking

nut that screw into the

tapped holes in the bottom

of the ST27’s base rails. The

feet can be independently adjusted to compensate for

uneven flooring. Refer to figure 2.

17. Stand the Column upright.

18. Proceed to page 10 of the XR27 Owner’s Manual for

placing the XR27 Loudspeaker System in a room.

McIntosh Part No. 040886

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, NY 13903

Autres manuels McIntosh Système de haut-parleurs

McIntosh

McIntosh LS320 Manuel utilisateur

McIntosh

McIntosh XCS200 Manuel utilisateur

McIntosh

McIntosh RS150 Manuel utilisateur

McIntosh

McIntosh HT-3 Manuel utilisateur

McIntosh

McIntosh MSS530 Manuel utilisateur

McIntosh

McIntosh XRT2.1K Manuel utilisateur

McIntosh

McIntosh XR200 Manuel utilisateur

McIntosh

McIntosh XRT28 Manuel utilisateur

McIntosh

McIntosh XRT29 Manuel utilisateur

McIntosh

McIntosh XR50 Manuel utilisateur

McIntosh

McIntosh XCS350 Manuel utilisateur

McIntosh

McIntosh WS300 Manuel utilisateur

McIntosh

McIntosh MSS650 Manuel utilisateur

McIntosh

McIntosh XR100 Manuel utilisateur

McIntosh

McIntosh XCS2K Manuel utilisateur

McIntosh

McIntosh INSTALLATION GUIDE WS320 Manuel utilisateur

McIntosh

McIntosh CS350 Manuel utilisateur

McIntosh

McIntosh LS360 Manuel utilisateur

McIntosh

McIntosh WS320 Manuel utilisateur

McIntosh

McIntosh MSS410 Manuel utilisateur

McIntosh

McIntosh CS100 Manuel utilisateur

McIntosh

McIntosh XRT1.1K Manuel utilisateur

McIntosh

McIntosh WS500 Manuel utilisateur

McIntosh

McIntosh XRT28 Manuel utilisateur

Manuels Système de haut-parleurs populaires d'autres marques

JVC

JVC CA-MXK5R Manuel utilisateur

LG NB4532B Manuel utilisateur

JVC

JVC CA-FSH100 Manuel utilisateur

5Core

5Core Pro Series Manuel utilisateur

EAW

EAW MQV1394e Manuel utilisateur

Lynx

Lynx GXR-LA10A Manuel utilisateur

iLive

iLive ITB066B Manuel utilisateur

RDX

RDX QuickStation 4 Manuel utilisateur

Electro-Voice

Electro-Voice S-122 Manuel utilisateur

Sven

Sven SPS-619 GOLD Manuel utilisateur

Pioneer

Pioneer CS-7070 Manuel utilisateur

EAW

EAW UB82e Manuel utilisateur

Sondpex

Sondpex Active Speaker System and Digital Music... Manuel utilisateur

JVC

JVC NX-PN7 Manuel utilisateur

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuel utilisateur

Yamaha

Yamaha NX-A01 - Speaker Sys Manuel utilisateur

SE Audiotechnik

SE Audiotechnik I-LINE Manuel utilisateur

Gemini

Gemini WRX-843 Series Manuel utilisateur