McIntosh LB100 Manuel utilisateur
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
The continuous improvement of its prod-
ucts is the policy of McIntosh Laboratory
Incorporated who reserve the right to
improve design without notice.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, NY 13903
www.mcintoshlabs.com
McIntosh Part No. 04187600
LB100
McIntosh Light Box
Operation Guide
2
Connection Diagram and Operation
LB100 LIGHT BOX
PC IN (Power Control/Trigger) receives turn-
on signals from a McIntosh component and PC
OUT (Power Control/Trigger) sends turn-on
signals on to another McIntosh Component
Connect the supplied
AC/DC Power Adapter
DC Output Connnector
The AC/DC Power Adapter supplied
with the LB100 McIntosh Light Box
Connect to a live AC outlet (always On)
using the supplied AC Power Cord. Re-
fer to information on the power supply
to determine the correct voltage
Connect to the DC IN 5V
connector on the Rear Panel
of the LB100 McIntosh Light
Box
Integrated Amplifier or Preamplifier
Connect to another McIntosh
Component Power Control or
Trigger Input Jack
Power On
Place the ON-OFF/REMOTE Power Control Switch in the ON
position or, if the PC IN Jack is connected to the Power Control/
Trigger Jack from a McIntosh Component, place the switch in
the OFF/REMOTE position.
Power Off
Place the ON-OFF/REMOTE Power Control Switch in the
OFF/REMOTE position or, if the PC IN Jack is connected to
the Power Control/Trigger Jack from a McIntosh Component,
switch power Off on the connected McIntosh Component.
Autres manuels McIntosh Accessoires
