McGREGOR MCH1851 Guide de l'utilisateur
ORIGINAL
INSTRUCTION
MANUAL
AFTER SALES SUPPORT
0345 605 2065
McGregor 18V
Cordless Hedge Trimmer
7509047/7409855(Model: MCH1845/MCH1851)
Important - Please read these
instructions fully before starting assembly
These instructions contain important information that will help
you get the best from your hedge trimmer, ensuring it is assembled
correctly and safely. If you need help or have damaged or
missing parts, call the Customer Helpline on 0345 605 2065
Customer helpline 0345 605 2065
2
Contents
Safety information…………………………………………....…………….................................……………........3
In the box…………….……………………………...…………………….......................................…………….14
Assemble………………………………………………………………....................................………………..15
Prepare……………………………………………………………...……...................................………………..15
Operate........................................................................................................................................18
Maintenance..............................................................................................................................................19
Technical data...............................................................................................................................................19
Accessories..............................................................................................................................................20
Troubleshooting..........................................................................................................................21
Environmental protection..............................................................................................................................21
Getting help..................................................................................................................................................22
Guarantee.................................................................................................................................................22
Customer helpline 0345 605 2065
3
Safety information
Important - Please read these instructions fully before starting assembly
Warning symbols
The following warning symbols appear throughout this
assembly manual and indicate the appropriate safety
measures you should take when assembling and
operating the hedge trimmer.
This symbol indicates there is a danger of serious personal
injury or death if you do not observe the warning.
Read operator’s manual
Do not expose to rain
General safety
WARNING!
Keep this assembly manual in a safe place following
assembly for reference at a later date.
Always ensure anyone intending to operate this hedge
trimmer is fully conversant with the contents of this
assembly manual prior to assembling, maintaining or
operating the hedge trimmer.
Perform assembly operations as described in this manual.
Failure to observe this warning may lead
to serious injury, death, or damage to the hedge trimmer.
Always take care when removing the packaging to prevent
damage to you or to the hedge trimmer.
IMPORTANT! Before assembling the hedge trimmer, check
all the parts indicated in the manual are in the box. Inspect
all the parts for signs of damage. Do not assemble the hedge
trimmer if you observe any damaged components.
Customer helpline 0345 605 2065
4
The following warning symbols appear throughout this as-
sembly manual and indicate the
appropriate safety measures you should take when as-
sembling and operating the Hedge Trimmer.
Read operator’s manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Do not expose to moisture
For indoor use only
Safety information
Important - Please read these instructions fully before starting assembly
Only operate the grass trimmer if you are wearing the
correct Personal Protective Equipment (PPE) as described
in the following warnings.
Personal safety
WARNING!
Warning symbols
Customer helpline 0345 605 2065
5
Safety information
Important - Please read these instructions fully before starting assembly
Warning symbols
T 2A
Li-Ion
Li-Ion
Read the operator’s manual.
Fuse
Positive terminal
Negative terminal
Double insulation
Li-ion battery. This product has been marked with a
symbol relating to ‘separate collection’ for all battery
packs and battery pack. It will then be recycled or
dismantled in order to reduce the impact on the
environment. Battery packs can be hazardous for the
environment and for human health since they contain
hazardous substances.
Batteries may enter water cycle if disposed improperly,
which can be hazardous for ecosystem. Do not dispose
of waste batteries as unsorted municipal waste.
Do not burn
Waste electrical products must not be disposed of with
household waste. Please recycle where facilities exist.
Check with your local authorities or retailer for recycling
advice.
Customer helpline 0345 605 2065
6
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
General power tool safety warnings
WARNING!
Safety information
Important - Please read these instructions fully before starting assembly
Customer helpline 0345 605 2065
7
General power tool safety warnings
Important - Please read these instructions fully before starting assembly
Safety information
electric shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power tool
while you are tired or under the inuence of drugs, alcohol or
medication. A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-
position before connecting to power source and/or battery
pack, picking up or carrying the tool. Carrying power tools
with your nger on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e)Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Customer helpline 0345 605 2065
8
General power tool safety warnings
Safety information
Important - Please read these instructions fully before starting assembly
f) Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-
related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other condition
that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
Customer helpline 0345 605 2065
9
General power tool safety warnings
Safety information
Important - Please read these instructions fully before starting assembly
g) Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of the
power tool for operations different from those intended could
result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of re when used with
another battery pack.
b) Use power tools only with specically designated battery
packs. Use of any other battery packs may create a risk of
injury and re.
c) When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a re.
d) Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, ush
with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or
burns.
6) Service
a) Have your power tool serviced by a qualied repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
Customer helpline 0345 605 2065
10
Hedge trimmer safety warnings
Safety information
Important - Please read these instructions fully before starting assembly
1. Keep all parts of the body away from the cutter blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is off
when clearing jammed material. A moment of inattention
while operating the hedge trimmer may result in serious
personal injury.
2.Carry the hedge trimmer by the handle with the cutter
blade stopped. When transporting or storing the hedge
trimmer always t the cutting device cover. Proper
handling of the hedge trimmer will reduce possible
personal injury from the cutter blades.
3.Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a “live” wire may make
exposed metal parts of the power tool “live” and could
give the operator an electric shock.
4.Check the hedge for foreign objects, e.g. wire fences.
5.Use both hands when operating the hedge trimmer.
Using one hand could cause loss of control and result in
serious personal injury.
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future reference.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
General safety warnings for your battery charger
WARNING!
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels McGREGOR Tondeuse
McGREGOR
McGREGOR MEH4045 Guide de l'utilisateur
McGREGOR
McGREGOR ERP929122424 Manuel utilisateur
McGREGOR
McGREGOR BM929121982 Manuel utilisateur
McGREGOR
McGREGOR MET3525 Guide de l'utilisateur
McGREGOR
McGREGOR MET2523 Guide de l'utilisateur
McGREGOR
McGREGOR MCEHT1841 Guide de l'utilisateur
McGREGOR
McGREGOR MCT1825 Guide de l'utilisateur
McGREGOR
McGREGOR GT2551 Guide de l'utilisateur
