McGraw MG2HPSS Instructions de montage
!"#$%$&
'()*+,-,./)0,+1(20)1.32+4)5.6)
6,5/7)8+(9)19*+(*,+)1.0/5::5/1(.;
ONLY a qualified engineer with
appropriate certifications may attempt
designing a new compressor to ensure
that all required safety and control
elements are in place and will work
together properly and safely. This
compressor pump is intended ONLY
as a replacement for a similarly rated
pump on an existing compressor that
includes all other needed components.
Constructing a new compressor using
this pump is not covered by the manual.
<=>?>
@101/)(2+)A,B01/,)5/;)7//*;CCAAAD75+B(+8+,1E7/DF(9
G951:)(2+)/,F7.1F5:)02**(+/)5/;)*+(62F/02**(+/H75+B(+8+,1E7/DF(9
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 21b
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2020 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly an d se rv ic e may n ot b e in cl uded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 I(+)/,F7.1F5:)J2,0/1(.0K)*:,50,)F5::)LM===M=NNM<O?OD Item 58494
P"IG'Q R"%$'G$"$SG T"#'P)U%P'%$P'"UU"'%V$
'5B:,)(8)S(./,./0
Safety ......................................................... 2
Specifications ............................................. 5
Installation .................................................. 6
Maintenance and Servicing ....................... 11
Parts List and Diagram .............................. 15
Warranty .................................................... 16
!"#$%$&)PQRWVUP)"$X)XGI%$%'%V$P
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
%RTV#'"$')P"IG'Q)%$IV#R"'%V$
&,.,+5:)P58,/4)!5+.1.E0
) !"#$%$&)#,56)5::)058,/4)A5+.1.E0)5.6)1.0/+2F/1(.0D)))
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
P5-,)5::)A5+.1.E0)5.6)1.0/+2F/1(.0)8(+)82/2+,)+,8,+,.F,D
The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be understood by the operator that common sense
and caution are factors which cannot be built into this product, but must be supplied by the operator.
1. !(+Y)5+,5)058,/4
a. Z,,*)A(+Y)5+,5)F:,5.)5.6)A,::):1/D
Cluttered or dark areas invite accidents.
b. X().(/)(*,+5/,)/7,)S(9*+,00(+)T29*)1.)
,[*:(01-,)5/9(0*7,+,0K)02F7)50)1.)/7,)
*+,0,.F,)(8)8:5995B:,):1J2160K)E50,0)(+)620/D
Compressor pump motors produce sparks
which may ignite the dust or fumes.
c. Z,,*)F71:6+,.)5.6)B40/5.6,+0)5A54)
8+(9)5.)(*,+5/1.E)F(9*+,00(+)*29*D
2. T,+0(.5:)058,/4
a. P/54)5:,+/K)A5/F7)A75/)4(2)5+,)6(1.E)
5.6)20,)F(99(.)0,.0,)A7,.)(*,+5/1.E)
/710)F(9*+,00(+)*29*D))X().(/)20,)/710)
F(9*+,00(+)*29*)A71:,)4(2)5+,)/1+,6)
(+)2.6,+)/7,)1.8:2,.F,)(8)6+2E0K)5:F(7(:)
(+)9,61F5/1(.D A moment of inattention
while operating a compressor pump may
result in serious personal injury.
b. \0,)*,+0(.5:)*+(/,F/1-,),J21*9,./D))
":A540)A,5+)"$P%M5**+(-,6),4,)
*+(/,F/1(.)62+1.E)0,/2*)5.6)20,D
Page 3I(+)/,F7.1F5:)J2,0/1(.0K)*:,50,)F5::)LM===M=NNM<O?ODItem 58494
P"IG'QR"%$'G$"$SGT"#'P)U%P' %$P'"UU"'%V$
3. Compressor Pump use and care
a. X10F(..,F/)/7,)*:2E)(8)/7,)F(9*+,00(+)
9(/(+)8+(9)/7,)*(A,+)0(2+F,)B,8(+,)
1.0/5::1.EK)95Y1.E)5.4)56320/9,./0K)F75.E1.E)
5FF,00(+1,0K)(+)0/(+1.E)/7,)S(9*+,00(+)
T29*D Such preventive safety measures
reduce the risk of starting the unit accidentally.
b. P/(+,)5.)16:,)F(9*+,00(+)*29*)(2/)(8)/7,)
+,5F7)(8)F71:6+,.)5.6)6().(/)5::(A)*,+0(.0)
2.8591:15+)A1/7)/7,)F(9*+,00(+)*29*)(+)/7,0,)
1.0/+2F/1(.0)/()(*,+5/,)1/D A compressor pump
is dangerous in the hands of untrained users.
c. R51./51.)/7,)S(9*+,00(+)T29*D))Z,,*)
/7,)S(9*+,00(+)T29*)F:,5.)8(+)
B,//,+)5.6)058,+)*,+8(+95.F,D))I(::(A)
1.0/+2F/1(.0)8(+):2B+1F5/1.E)5.6)F75.E1.E)
5FF,00(+1,0D))Z,,*)6+4K)F:,5.)5.6)8+,,)8+(9)
(1:)5.6)E+,50,D))S7,FY)8(+)9105:1E.9,./)
(+)B1.61.E)(8)9(-1.E)*5+/0K)B+,5Y5E,)
(8)*5+/0)5.6)5.4)(/7,+)F(.61/1(.)/75/)
954)588,F/)/7,)F(9*+,00(+]0)(*,+5/1(.D))
%8)6595E,6K)75-,)/7,)F(9*+,00(+)+,*51+,6)
B,8(+,)20,D Many accidents are caused by
a poorly maintained compressor pump.
d. \0,)/7,)S(9*+,00(+)T29*)1.)5FF(+65.F,)
A1/7)/7,0,)1.0/+2F/1(.0K)/5Y1.E)1./()5FF(2./)
/7,)A(+Y1.E)F(.61/1(.0)5.6)/7,)A(+Y)/()B,)
*,+8(+9,6D Use of the Compressor Pump
for operations different from those intended
could result in a hazardous situation.
4. P,+-1F,
a. ^5-,)/7,)S(9*+,00(+)T29*)0,+-1F,6)B4)5)
J25:181,6)+,*51+)*,+0(.)201.E)(.:4)16,./1F5:)
+,*:5F,9,./)*5+/0D This will ensure that the
safety of the Compressor Pump is maintained.
S(9*+,00(+)T29*)P58,/4)!5+.1.E0
1. V$UQ)5)J25:181,6),.E1.,,+)A1/7)5**+(*+15/,)
F,+/181F5/1(.0)954)5//,9*/)6,01E.1.E)5).,A)
F(9*+,00(+)/(),.02+,)/75/)5::)+,J21+,6)058,/4)
5.6)F(./+(:),:,9,./0)5+,)1.)*:5F,)5.6)A1::)A(+Y)
/(E,/7,+)*+(*,+:4)5.6)058,:4D))'710)F(9*+,00(+)
*29*)10)1./,.6,6)V$UQ)50)5)+,*:5F,9,./)
8(+)5)0191:5+:4)+5/,6)*29*)(.)5.),[10/1.E)
F(9*+,00(+)/75/)1.F:26,0)5::)(/7,+).,,6,6)
F(9*(.,./0D))S(.0/+2F/1.E)5).,A)F(9*+,00(+)
201.E)/710)*29*)10).(/)F(-,+,6)B4)/710)95.25:D
2. \0,)P58,/4)&25+6)8(+)T2::,40D The Air
Compressor Pump Pulley, belts (not included),
and motor pulley (not included) must be covered
by a safety guard (not included) covering
all moving elements before operation.
3. W,8(+,)81+0/)5.6),-,+4)20,K)-,+184)
T29*)750)02881F1,./)(1:D
4. The use of accessories or attachments not
recommended by the manufacturer may
result in a risk of injury to persons.
5. R105:1E.9,./)B,/A,,.)R(/(+)5.6)T29*)
F5.)6595E,)/7,)T29*)T2::,4D))Use a
straight edge, such as a yardstick, to check
and adjust alignment as needed.
6. \0,)*+(*,+)01_,)9(/(+)5.6)9(/(+)*2::,4D))
This Air Compressor Pump must be installed
with a 2 HP electric motor and pulley (both not
included) which can turn the Air Compressor
Pump Pulley at approximately 1300 RPM.
7. %.0/5::)9(/(+K)*2::,4)B,:/0)5.6)*2::,4)B,:/)
F(-,+)0,F2+,:4D Be sure to use the proper size
bolts to install the motor (not included). The belts
and belt cover (not included) must be strong
enough to prevent breaking and possible injury.
8. W,)02+,)5::),J21*9,./)10)+5/,6)/()/7,)
5**+(*+15/,)F5*5F1/4)(8)/710)*29*D))Make sure
that the lowest rated piece of equipment being
used can handle the maximum pressure of the
Air Compressor Pump (see Specifications).
9. X().(/)61+,F/)/7,)51+)0/+,59)5/)
5.4)*,+0(.)(+)5.195:D)
10. "-(16)B2+.0D))The Cylinders (14), Cylinder
Heads (5) and Air Outlet components become
very hot during operation. Do not touch.
11. Industrial applications must follow OSHA guidelines.
12. Maintain labels and nameplates on the
Compressor Pump. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
13. This product is not a toy.
Keep it out of reach of children.
Page 4 I(+)/,F7.1F5:)J2,0/1(.0K)*:,50,)F5::)LM===M=NNM<O?OD Item 58494
P"IG'Q R"%$'G$"$SG T"#'P)U%P'%$P'"UU"'%V$
"1+)S(9*+,00(+)P58,/4)!5+.1.E0
1. #10Y)(8)81+,)(+),[*:(01(.)M)6().(/)0*+54)
8:5995B:,):1J216)1.)5)F(.81.,6)5+,5)(+)/(A5+60)5)
7(/)02+85F,D))P*+54)5+,5)920/)B,)A,::M-,./1:5/,6D))
X().(/)09(Y,)A71:,)0*+541.E)(+)0*+54)A7,+,)
0*5+Y)(+)8:59,)10)*+,0,./D))"+F1.E)*5+/0)M)Y,,*)
F(9*+,00(+)5/):,50/)`a)8,,/)5A54)8+(9),[*:(01-,)
-5*(+0K)02F7)50)A7,.)0*+541.E)A1/7)5)0*+54)E2.D
2. #10Y)(8)B2+0/1.E)M)6().(/)56320/)+,E2:5/(+)71E7,+)
/75.)95+Y,6)95[1929)*+,002+,)(8)5//5F79,./D
3. #10Y)(8)1.32+4)M)6().(/)61+,F/)51+)
0/+,59)5/)*,(*:,)(+)5.195:0D
4. X().(/)20,)/()02**:4)B+,5/71.E)51+D
5. X().(/):,5-,)F(9*+,00(+)2.5//,.6,6)
8(+)5.),[/,.6,6)*,+1(6)A71:,)*:2EE,6)1.D))
\.*:2E)F(9*+,00(+)58/,+)A(+Y1.ED
6. Z,,*)F(9*+,00(+)A,::M-,./1:5/,6D))
X().(/)F(-,+)F(9*+,00(+)62+1.E)20,D
7. Drain tank daily and after use. Internal rust causes
tank failure and explosion.
8. Add correct amount of compressor oil before first
use and every use. Operating with low or no oil
causes permanent damage and voids warranty.
9. Do not remove the valve cover or
adjust internal components.
10. Compressor head gets hot during operation.
Do not touch it or allow children nearby
during or immediately following operation.
11. Do not use the air hose to move the compressor.
12. Release the pressure in the
storage tank before moving.
13. The use of accessories or attachments not
recommended by the manufacturer may
result in a risk of injury to persons.
14. All air line components, including hoses, pipe,
connectors, filters, etc., must be rated for at least
a working pressure of 150 PSI, or 150% of the
maximum system pressure, whichever is greater.
15. USE OF AN EXTENSION CORD IS NOT
RECOMMENDED. If you choose to use an
extension cord, use the following guidelines:
'"WUG)";))#GSVRRG$XGX)R%$%R\R)!%#G)
&"\&G)IV#)Gb'G$P%V$)SV#XP)
cL`a)@VU'd
$"RGTU"'G)
"RTG#GP
c5/)82::):(56d
Gb'G$P%V$)SV#X)
UG$&'^
25′ 50′ 100′ 150′
0 – 6 18 16 16 14
6.1 – 10 18 16 X().(/)20,D
10.1 – 12 16 16 X().(/)20,D
12.1 – 16 14 12 X().(/)20,D
a. Make sure your extension cord
is in good condition.
b. Be sure to use an extension cord which
is heavy enough to carry the current your
product will draw. An undersized cord will
cause a drop in line voltage resulting in loss
of power and overheating. Table A shows the
correct size to use depending on cord length
and nameplate ampere rating. If in doubt,
use the next heavier gauge. The smaller
the gauge number, the heavier the cord.
16. Operate unit on level surface. Check oil level
daily and fill to marked level if needed.
17. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
)P"@G)'^GPG)%$P'#\S'%V$PD
Page 5I(+)/,F7.1F5:)J2,0/1(.0K)*:,50,)F5::)LM===M=NNM<O?ODItem 58494
P"IG'QR"%$'G$"$SGT"#'P)U%P' %$P'"UU"'%V$
&+(2.61.E
'V)T#G@G$')GUGS'#%S)P^VSZ)"$X)XG"'^))
I#VR)%$SV##GS')&#V\$X%$&)!%#G)SV$$GS'%V$;)
S7,FY)A1/7)5)J25:181,6),:,F/+1F15.)18)4(2)5+,)1.)6(2B/)50)/()A7,/7,+)/7,)(2/:,/)10)*+(*,+:4)
E+(2.6,6D))X().(/)9(6184)/7,)*(A,+)F(+6)*:2E)*+(-16,6)A1/7)5.4)9(/(+)20,6)A1/7)/710)
S(9*+,00(+)T29*D))$,-,+)+,9(-,)/7,)E+(2.61.E)*+(.E)8+(9)/7,)*:2ED))X().(/)20,)/7,)9(/(+)18)/7,)*(A,+)
F(+6)(+)*:2E)10)6595E,6D))%8)6595E,6K)75-,)1/)+,*51+,6)B4)5)0,+-1F,)85F1:1/4)B,8(+,)20,D))%8)/7,)*:2E)A1::).(/)81/)
/7,)(2/:,/K)75-,)5)*+(*,+)(2/:,/)1.0/5::,6)B4)5)J25:181,6),:,F/+1F15.D
P49B(:(E4
TP% Pounds per square inch of pressure
SIR Cubic Feet per Minute flow
PSIR Cubic Feet per Minute flow
at standard conditions
$T' National pipe thread, tapered
$TP National pipe thread, straight
Double Insulated
@Volts
eAlternating Current
"Amperes
P*,F181F5/1(.0
Type Single Stage V-Style; Oil Lubricated
Required HP 2 HP motor
Max PSI 155 PSI
Max RPM 1300 RPM
Air Outlet 9/16″ - 24 UNEF Thread
Air Delivery
@ 1050 RPM
6.2 SCFM @ 40 PSI
5.3 SCFM @ 90 PSI
Lubrication Splash Type with Oil Level Window
Oil Type Synthetic non-detergent Air Compressor Oil
(Sold separately)
Pump Pulley 10.5″ diameter with A type-groove
Bolt Pattern 6-3/4″ L X 3-9/16″ W
Recommended
Mounting Bolts 5/16" diameter, grade 5 or better
Overall Dimensions 13-1/2″ L X 10-3/4″ W x 12-1/4″ H
Sound Level 86 dB @ 1m
Page 6 I(+)/,F7.1F5:)J2,0/1(.0K)*:,50,)F5::)LM===M=NNM<O?OD Item 58494
P"IG'Q R"%$'G$"$SG T"#'P)U%P'%$P'"UU"'%V$
)%.0/5::5/1(.
) #,56)/7,)G$'%#G %RTV#'"$')P"IG'Q)%$IV#R"'%V$)0,F/1(.)5/)/7,)B,E1..1.E)(8)/710)
95.25:)1.F:261.E)5::)/,[/)2.6,+)02B7,561.E0)/7,+,1.)B,8(+,)0,/)2*)(+)20,)(8)/710)*+(62F/D
'V)T#G@G$')PG#%V\P)%$f\#Q)I#VR)"SS%XG$'"U)VTG#"'%V$;
'2+.)/7,)T(A,+)PA1/F7)gVIIh)5.6)2.*:2E)/7,)"1+)S(9*+,00(+)8+(9)1/0),:,F/+1F5:)
(2/:,/)B,8(+,)500,9B:1.E)(+)95Y1.E)5.4)56320/9,./0)/()/7,)F(9*+,00(+D
$(/,; For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
S(9*(.,./0
Air Filter Assembly
Cylinder Head
Cylinder
Pump Flywheel
Oil Sight Glass
Crankcase
Oil Drain Plug
Oil Fill Plug
"00,9B:4
1. Make sure center hole on Pump Flywheel
(31) is free of burrs and rough edges.
2. Align center hole of Pump Flywheel with Crankshaft.
Slide Pump Flywheel onto Crankshaft. Pump
Flywheel should be installed for counterclockwise
rotation when facing the pulley side of the Pump.
!5+.1.Ei Do not force or hammer the
Pump Pulley onto the Crankshaft.
3. Slide the Washer (32) onto Bolt (33) and
insert Bolt through Pump Flywheel and
thread counterclockwise into the Crankshaft.
Tighten using wrench (not included).
%.0/5::5/1(.
1. Place Air Compressor Pump on mounting
surface at same level as 2HP (1.6 running HP)
motor used to drive it. Pump positioning must
incorporate easy access to Oil Drain Plug (22).
2. Use a motor (not included) with appropriate sized
pulley to achieve the target RPM (1300 max RPM).
Page 7I(+)/,F7.1F5:)J2,0/1(.0K)*:,50,)F5::)LM===M=NNM<O?ODItem 58494
P"IG'QR"%$'G$"$SGT"#'P)U%P' %$P'"UU"'%V$
$(/,; Recommended pulley size is 3.75″.
To calculate needed pulley diameter, multiply
Pump Pulley Diameter (10.5″) by Pump RPM
(1300). Divide this number by motor RPM to get
the necessary motor pulley size. See Figure A.
I1E2+,)";))S5:F2:5/1(.)8(+)R(/(+)T2::,4
3. Pump Flywheel (31) must be in perfect alignment
with motor pulley. Misalignment between motor
and Pump can cause damage to equipment.
4. Verify that Pump Flywheel turns freely where
it overhangs the mounting surface.
5. Place a Type A Belt (not included) over Pump
Flywheel and motor pulley (not included).
6. Pull Compressor Pump until properly aligned,
and the belt is tight. Recheck alignment of
motor pulley, belt, and Pump Flywheel.
7. To mount Compressor Pump:
a. Use mounting holes in Compressor Pump
Base as a template to mark spots where four
holes will be drilled into mounting surface.
b. Move Compressor Pump aside, and drill four
5/16″ diameter holes in the mounting surface.
c. Move Compressor Pump back to mounting
position and secure each corner of the base
with a 5/16″ diameter Grade 5 (or better) bolt,
washer, lock washer, and nut (all not included).
d. Recheck Pump, belt, and pulley alignment.
Make adjustments as necessary.
$(/,; To test proper tension on belt, press down on belt.
There should be 1/2″ deflection or less at mid span.
8. Connect plumbing hardware (not included) from Air
Outlet to Air Destination (i.e., air pressure tank of
compressor, not included).Route tubing in shortest
possible path.
9. Depending on the air tool, you may need to incorporate
additional components, such as in-line oiler, filter, or
dryer (all sold separately), as shown in Figure C and
D on page 8 and 9. Consult your air tool’s manual for
needed accessories.
10. Install safety guard (not included) that surrounds motor
pulley, belt, and Pump Flywheel. Safety guard should
cover all sides of moving belt and pulleys. Safety guard
must have one inch clearance from all moving parts
and should be sturdy enough to prevent injury.
!5+.1.Ei Do not operate Air Compressor
Pump without safety guard in place.
11. Fill Compressor Pump Crankcase with appropriate
amount of Air Compressor Oil (sold separately).
S7,FY1.E)V1:)U,-,:
1. Check oil level before operating Air Compressor Pump.
%RTV#'"$'; Running Pump with no oil or low oil will
cause damage to equipment and void warranty.
2. Fill Pump Crankcase with synthetic non-
detergent Air Compressor Oil.
3. Oil level should be at the center of the FULL level
on the Oil Sight Glass (21). Add oil as needed to
maintain this level. Do not let oil level go below
center circle (LOW) and do not fill oil above center
circle (OVERFILL). See Figure B.
V@G#I%UU
UV!
I\UU
I1E2+,)W;)))V1:)P1E7/)&:500
4. To add oil:
a. Remove the Oil Fill Plug.
b. Using a funnel to avoid spills, pour enough
oil into the Pump Crankcase to reach
the “full” level in the Oil Sight Glass.
c. Replace the Oil Fill Plug.
5. If uncertain which oil to use for this compressor,
call Harbor Freight Tools customer service
at 1-888-866-5797 for assistance.
6. S75.E,)/7,)F(9*+,00(+)(1:)58/,+)/7,)81+0/)
7(2+)(8)20,)/()+,9(-,)5.4)6,B+10D
S"\'%V$i)'V)T#G@G$')%$f\#Q)I#VR)W\#$P;)
X().(/)566)(+)F75.E,)/7,)(1:)A71:,)
/7,)F(9*+,00(+)10)1.)(*,+5/1(.D))
"::(A)/7,)F(9*+,00(+)/()F((:)B,8(+,)+,*:5F1.E)(1:D
Page 8 I(+)/,F7.1F5:)J2,0/1(.0K)*:,50,)F5::)LM===M=NNM<O?OD Item 58494
P"IG'Q R"%$'G$"$SG T"#'P)U%P'%$P'"UU"'%V$
I1E2+,)S;))T(+/5B:,)"1+)P2**:4)P,/2*
G
A
E
E
H
F
B
Non-lubricated
Tools
Lubricated
Tools
A
B
C
C
DA
X,0F+1*/1(. I2.F/1(.
A Air Hose Connects air to tool
B Filter Prevents dirt and condensation from damaging tool or workpiece
C Regulator Adjusts air pressure to tool
D Lubricator (optional) For air tool lubrication
E Coupler and Plug Provides quick connection and release
F Leader Hose (optional) Increases coupler life
G Air Cleaner / Dryer (optional) Prevents water vapor from damaging workpiece
H Air Adjusting Valve (optional) For fine tuning airflow at tool
Page 9I(+)/,F7.1F5:)J2,0/1(.0K)*:,50,)F5::)LM===M=NNM<O?ODItem 58494
P"IG'QR"%$'G$"$SGT"#'P)U%P' %$P'"UU"'%V$
I1E2+,)X;))P/5/1(.5+4)"1+)P2**:4)P,/2*
N
L
L O
M
C
C
Non-lubricated Tools
Lubricated
Tools
H
I
I
J
JKH
F
G
E
Slope
F
F
B
B
A
A
CD
X,0F+1*/1(. I2.F/1(.
A Vibration Pads For noise and vibration reduction
B Anchor Bolts Secures air compressor in place
C Ball Valve Isolates sections of system for maintenance
D Isolation Hose For vibration reduction
EMain Air Line - 3/4″ minimum recommended Distributes air to branch lines
F Ball Valve To drain moisture from system
GBranch Air Line -1/2″ minimum recommended Brings air to point of use
H Air Hose Connects air to tool
I Filter Prevents dirt and condensation from damaging tool or workpiece
J Regulator Adjusts air pressure to tool
K Lubricator (optional) For air tool lubrication
L Coupler and Plug Provides quick connection and release
M Leader Hose (optional) Increases coupler life
N Air Cleaner / Dryer (optional) Prevents water vapor from damaging workpiece
O Air Adjusting Valve (optional) For fine tuning airflow at tool
Page 10 I(+)/,F7.1F5:)J2,0/1(.0K)*:,50,)F5::)LM===M=NNM<O?OD Item 58494
P"IG'Q R"%$'G$"$SG T"#'P)U%P'%$P'"UU"'%V$
Ce manuel convient aux modèles suivants
1
Table des matières
Manuels Pompe à eau populaires d'autres marques
Sykes AmeriPumps
Sykes AmeriPumps GP100M Guide de dépannage
DUROMAX
DUROMAX XP WX Series Manuel utilisateur
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 Manuel utilisateur
Franklin Electric
Franklin Electric IPS Manuel utilisateur
Xylem
Xylem e-1532 Series Manuel utilisateur
Milton Roy
Milton Roy PRIMEROYAL Manuel utilisateur