MB Connect Line mymbCONNECT24 Manuel utilisateur
.
User manual for mymbCONNECT24 server
Item no. 0690; 0691 / Version: 2.1.x
Page 2 of 20 | Item no. 0690; 0691 / Version: 2.1.x | 26.07.2016
Copyright © MB Connect Line GmbH 2015
No part of this document and its contents may be reproduced, used or distributed without our express permis-
sion. Damages will be claimed in the event of infringement. All rights reserved.
This documentation describes the application of the mymbCONNECT24.midi /.maxi/.mini servers - item no
0690 and 0691 from firmware version V 2.1.
Despite a detailed description of the device and its functions, we cannot be held liable for the correctness of the
content. The latest information can be obtained on our homepage. We welcome any comments or suggestions
for improvement.
Trademarks
The use of any trademark not listed herein is not an indication that it is freely available for use.
MB Connect Line confirms that the mymbCONNECT24 device complies with the basic requirements and
all other relevant provisions of European Directive 1999/5/EC. To see the Declaration of Conformity, visit:
www.mbconnectline.com
Issued by:
MB Connect Line GmbH
Remote Maintenance Solutions
Dinkelsbühler Str. 6
91550 Dinkelsbühl
Germany
Tel.:
+49 (0) 700 622 666 32 /
+49 (0) 700MBCONNECT
Website:
www.mbconnectline.com
Release notes
Date Version Previous version Comment
2016 / 07 / 28 V 2.1.x V 2.x Description of the new server hardware
Table of contents | Page 3 of 20
Table of contents
1 General................................................................................................................................................... 4
1.1 Brief description............................................................................................................................4
1.2 Features........................................................................................................................................4
1.3 Safety instructions.........................................................................................................................4
2 Technical data....................................................................................................................................... 5
3 Included in delivery.............................................................................................................................. 6
4 Technical Support.................................................................................................................................6
5 Displays, controls and connections...................................................................................................7
6 Interface assignments.......................................................................................................................... 9
7 First time operation............................................................................................................................ 10
7.1 Console.......................................................................................................................................10
7.2 Web interface (administration interface).....................................................................................11
8 Account Management.........................................................................................................................15
9 Factory settings on delivery..............................................................................................................20
Page 4 of 20 | Item no. 0690; 0691 / Version: 2.1.x | 26.07.2016
1 General
1.1 Brief description
The VPN connection portal mymbCONNECT24 offers you optimum flexibility and security.
mymbCONNECT24 combines the advantages of a portal solution with the special requirements of your com-
pany. Administration and hardware stay in house. This combination of a VPN portal with hardware, which acts
as an intelligent communication point including integrated user and device administration, is intended both for
service personnel user accounts and mbNET / mbSPIDER accounts for machines and systems.
1.2 Features
Features
•Tunnel end points do not end outside of your company
•Administration and hardware stay in house
•Secure system, comprising a VPN server and reliable VPN terminal devices
•Simple, clearly structured client and server configuration
•Highly available backup system
1.3 Safety instructions
Safety instructions
•The device is built to the latest technological standards and recognized safety standards (see Declara-
tion of Conformity).
•The device must be installed in a dry location. No liquid must be allowed to get inside the device, as
this could result in electric shocks or short circuits.
•The device is for indoor use only.
•Never open the device chassis. Unauthorized opening and improper repair can pose a danger to the
user. Unauthorized modifications are not covered by the manufacturer's warranty. Opening up the de-
vice voids the warranty.
•The device must be disposed of in line with European regulations and German legislation on electron-
ics and electronic devices, and not in general household waste. The device should be disposed of ac-
cordingly.
Technical data | Page 5 of 20
2 Technical data
mymbCONNECT24.mini
Voltage V (ADC) 100 - 240 VAC 50 / 60 Hz
(ext. power pack DC 12 V / 60 W)
Power input Max. 5 A at 12 VDC
Protection class IP 20
Area of application Dry environments
Operating temperature 0 - 40°C
Storage temperature -20 - +70°C
Humidity 10 - 90% (non-condensing)
Weight Approx. 2.5 kg
Dimensions
(max. in mm) W x H x D:
232 x 44 x 152
Form factor Compact size chassis
Processor Intel®Atom™C2358 1.7 GHz
RAM 2 GB
WAN interface Ethernet 1 GBit
VPN Ethernet 1 GBit
LAN 1 - LAN 2 Ethernet 1 GBit
USB 1 x USB 2.0; 1x USB 3.0
Console RS232 via RJ type connector
General license CE; FCC class B
Table 1: Technical data
Page 6 of 20 | Item no. 0690; 0691 / Version: 2.1.x | 26.07.2016
3 Included in delivery
mymbCONNECT24.mini
•mymbCONNECT24.mini, compact size chassis
•Serial cable (RJ45 for RS232 console access)
•Power pack adapter for power supply (input 100 - 240 VAC; output 12 VDC, 60 W)
•Schuko low-power device connecting cable
If any of these parts are missing or damaged, please contact:
MB CONNECT LINE GMBH
Remote Maintenance Solutions
Winnettener Str. 6
91550 Dinkelsbühl
Germany
Tel.:
+49 (0) 700 622 666 32 /
+49 (0) 700 MBCONNECT
E-mail: [email protected]
Website: www.mbconnectline.de
Keep the box and the original packaging in case you have to send the device in for repair at a later date.
4 Technical Support
For technical support (FAQ, troubleshooting, most recent information, etc.) see our website
www.mbconnectline.com.
For support enquiries, always give the serial number of your router.
E-mail: [email protected]
Tel.: (EU) +49 (0) 98 51 / 58 25 29 900 / (US) +1-630-797-6067
Displays, controls and connections | Page 7 of 20
5 Displays, controls and connections
Front view
LED designation Description
Power Lights up when the power is on
Ready Lights up when the device is ready for operation
HDD Lights up when the hard drive is accessed
LAN 1 1. network interface for the local network
LAN 2 2. network interface for the local network
VPN Network interface for direct access to the VPN network
WAN Network interface for access to the Internet
Page 8 of 20 | Item no. 0690; 0691 / Version: 2.1.x | 26.07.2016
Rear view
Designation Description
ON | OFF Toggle switch
DC+12V Connection socket for power supply
Restore Factory Settings Countersunk button - resets the device to factory settings
ADVICE
To reset the device to factory settings, proceed as follows:
•Press and hold down the button until the Rdy LED flashes
•Then release the button and press it again, once
Reset Countersunk button for rebooting the device
CONSOLE Console access interface for basic configuration of the system
USB USB interfaces (e.g. to backup file external storage devices)
1 = USB 2.0; 2 = USB 3.0
LAN 1 1. network interface for the local network
LAN 2 2. network interface for the local network
VPN Network interface for direct access to the VPN network
WAN Network interface for access to the Internet
USB USB 2.0 interfaces (e.g. to backup file external storage devices)
Interface assignments | Page 9 of 20
6 Interface assignments
Pinout of the RJ45 interface
Pin Signal
1 Data Set Ready (DSR)
2 Request to Send (RTS)
3 Ground (GND)
4 Transmit Data (TXD)
5 Receive Data (RXD)
6 Data Carrier Detect (DCD)
7 Clear to Send (CTS)
8 Data Terminal Ready (DTR)
Pinout of LAN, VPN and WAN interfaces
Pin Signal
1 TX+
2 TX-
3 RX+
4 Not connected
5 Not connected
6 RX-
Pinout of USB interface
Pin Signal
1 VCC (+5 V)
2 -Data
3 +Data
4 GND
Page 10 of 20 | Item no. 0690; 0691 / Version: 2.1.x | 26.07.2016
7 First time operation
The LAN IP address of the device can be preconfigured or accessed on the shell via the console interface. For
other settings, the device must be accessed using the browser via the LANx interface.
7.1 Console
A terminal program is required to connect to
the console interface of the device. The Tel-
net client "Putty", for example, is suitable for
this purpose.
Create a new connection using the speci-
fied parameters (38400,8,N,1 hardware flow
control).
Press "Enter" to display the device Start
menu.
After login
User: "console"
Password: "console"
the main menu is displayed. The various
options are available to select.
ADVICE
Standard login information MUST be
changed for security reasons.
The changes can be made on the web
interface (backend) under >Remote Ac-
cess / Access Settings<.
Ce manuel convient aux modèles suivants
3
Table des matières
