7. Place the extension cap at the both points that you marked
on the masking tape (as described in point 4 of this manual).
8. Slowly remove the rest of the foil from the double sided
mounting tape holding extension cap in the marked place of
fitment and applying pressure (ask someone for assistance to
prevent part from movement)
9. Remove the protective foil from the part.
10. Use the heat gun to slightly heat the extension cap, so the
mounting tape sticks well to the surface of the spoiler. Be
cautious not to use excessive heat or if possible set the heat to
a minimum. Keep 30-40cm distance while heating the extension
cap. Overheating could cause damage to the product.
minimum
30-40cm
7
9
R
d e s i g n. c o m
maxtondesign_official
Maxton Design
Maxton Design
10
8
More installation manuals on our website:
www.maxtondesign.com/manuals
